P265 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies

413 Rood RD, Suite 7

Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 1 Applications:

  • Audio and visual equipment
  • Hand held equipment
  • Test and measurement equipment
  • Communication equipment
  • Laboratory and test equipment Description: 1/2” Round Rotary Potentiometer, with metal shaft and bushing. Options include audio and linear tapers; plain, flatted and slotted shaft types.

Electrical Characteristics

TA = 25ᵒC unless otherwise noted Resistance Range 500 Ω to 1M Ω Standard Resistance Tolerance 500 Ω<R<1M Ω ± 20% R≤500 Ω or R≥1M Ω ± 30% Residual Resistance Term. 1~2: Less than 4 Ω Term: 2~3: Less than 4 Ω Resistance Taper A, B, C, D Maximum Operating Voltage Linear Taper B: 200 Vac Other Tapers: 150 Vac Rated Power Linear Taper B: 0.5 W Others: 0.25 W Dielectric Strength 1 minute at 500 Vac Rotational Noise Less than 100 mV Insulation Resistance More than 100 MΩ at 500 Vdc Linearity tolerance ±5% Independent Electrical rotation 265° ±5° Features:

  • Resistance Range 500 Ω to 1M Ω
  • Temperature Range -40°C to +120°C
  • Rotational Cycles of 50,000 minimum
  • PC Pins and Solder hook versions
  • RoHS compliant
  • Direct Cross to Honeywell 392 / RV6

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 2 Mechanical Travel 300° ± 5° Rotational Torque 20 gf.cm~200 gf.cm Rotational Stop Strength 3.5 kgf.cm minimum Shaft Pull Strength 3.5 kgf minimum for 60 seconds Nut Tightening Strength 8 kgf.cm minimum Rotational Life 50,000 Cycles minimum Mechanical Characteristics TA = 25ᵒC unless otherwise noted Environmental Characteristics TA = 25ᵒC unless otherwise noted Operating Temperature -40°C to +120°C IP Rating IP 64 Soldering Condition Wave Soldering 260 °C maximum for 1-3 seconds Hand Soldering 300 ᵒC maximum for 3 seconds RoHS Please refer to TT Electronics website REACH Please refer to TT Electronics website Packaging Information Standard Packaging Plastic Trays Hardware Flat washer and mounting nut

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 3 P265 P 1 1 S 20 N C B 10K Part Family Terminal Configuration P - PC Pins S - Solder Hook Number of Gangs 1 - 1 Gang Bushing Length “B” 1 - .250” 2 - .500” Shaft Type P - Plain Shaft F - Flatted Shaft S - Slotted Shaft Shaft Length (mm) - “L” Switch Option N - None Full CCW Position C (F and S shaft) N (P Shaft only) (see Note 1) Resistance Taper A - Audio (15A) B - Linear (1B) C - Reverse Audio (15C) D - Audio (10A) Resistance See Resistance Table

Ordering Information

Resistance (Ohms) 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Code 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1MEG

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 4 Standard Tapers

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 5 Shaft Style & Length F Type L 13 20 22 25 16 F 5 12 12 15 7 Note 1 : Full CCW Position P Type L 15 22 25 20 51 10 S Type L 15 22 25 20 51 10 N: None for P-Type C: for F-Type C: for S-Type

1/2” Round Rotary Potentiometer P265 Series © TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics ’ own data and is considered accurate at time of going to print. TT Electronics | BI Technologies Calexico, CA 92231 Ph: + 1 (714) 447-2345 www.ttelectronics.com Rev - 04/2021 Page 6 OUTLINE DIMENSIONS S STYLE - SOLDER HOOK OUTLINE DIMENSIONS P STYLE - PC PINS