P25PG-1205E21LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PM7L-Series – P25PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P25PG-xxxxE/Z2:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (See Table) Input Filter Capacitors Input Reflected Ripple Current¹ 35 mA pk-pk Start up Time (Nom. Vin and constant resistive load) 20mS, typ. Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (Automatic Recovery) Over Current Protection 140% of max. Iout Line Regulation ± 0.5% Load Regulation Single: Dual: ± 0.5% (0% - 100%) Ripple and Noise (20Mhz bandwidth) 100 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1500 VDC I/O Isolation Capacitance 1000 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 125 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Safety Standard (designed to meet) IEC 60950-1 Physical Specifications Case Material Nickel Coated Brass Potting Material Epoxy (UL94V-0 rated) Weight ~ 60g, typ. Environment Specifications Operating Temperature -40 to +65° C (for 100% load) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM7 L series is a family of cost effective 15 -30 W single & dual output DC-DC converters. These converters are made with ni ckle-coated brass case in a 2”x2” with high performance features such as 1500 VDC input/output isolation voltage, continuous short ci rcuit protection with automatic restart and tight line / load regulation. Devices are encapsulated by using flame retardant resin. High performance fe atures are high efficiency operation up to 87% and output voltage a ccuracy of ±1% maximum. PM7L-SERIES /checkbld 25 Watt /checkbld 2:1 Wide Input /checkbld 2” x 2” Case /checkbld 1.5 kV DC I/O Isolation /checkbld Regulated Output /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. Rev.02-2011

PM7L-Series – P25PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P25PG-1205E2:1LF 9-18 20 2510 5 0 5000 83 3300 P25PG-127R2E2:1LF 9-18 20 2480 7.2 0 3472 84 2200 P25PG-1209E2:1LF 9-18 20 2480 9 0 2777 84 1000 P25PG-1212E2:1LF 9-18 20 2480 12 0 2083 84 1000 P25PG-1215E2:1LF 9-18 30 2450 15 0 1666 85 680 P25PG-1218E2:1LF 9-18 30 2450 18 0 1388 85 470 P25PG-1224E2:1LF 9-18 30 2450 24 0 1041 85 470 P25PG-243R3E2:1LF 18-36 25 838 3.3 0 5000 82 3300 P25PG-2405E2:1LF 18-36 25 1240 5 0 5000 84 3300 P25PG-247R2E2:1LF 18-36 25 1240 7.2 0 3472 84 2200 P25PG-2409E2:1LF 18-36 25 1240 9 0 2777 84 1000 P25PG-2412E2:1LF 18-36 25 1225 12 0 2083 85 1000 P25PG-2415E2:1LF 18-36 25 1225 15 0 1666 85 680 P25PG-2418E2:1LF 18-36 25 1225 18 0 1388 85 470 P25PG-2424E2:1LF 18-36 25 1211 24 0 1041 86 470 P25PG-483R3E2:1LF 36-72 20 429 3.3 0 5000 80 3300 P25PG-4805E2:1LF 36-72 20 627 5 0 5000 83 3300 P25PG-487R2E2:1LF 36-72 20 620 7.2 0 3472 84 2200 P25PG-4809E2:1LF 36-72 20 620 9 0 2777 84 1000 P25PG-4812E2:1LF 36-72 20 612 12 0 2083 85 1000 P25PG-4815E2:1LF 36-72 20 605 15 0 1666 86 680 P25PG-4818E2:1LF 36-72 20 605 18 0 1388 86 470 P25PG-4824E2:1LF 36-72 25 592 24 0 1041 88 470 If you need other specifications, please enquire. Notes:

PM7L-Series – P25PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P25PG-123R3Z2:1LF 9-18 20 1718 ± 3.3 0 ± 2500 80 ± 1500 P25PG-1205Z2:1LF 9-18 25 2540 ± 5 0 ± 2500 82 ± 1500 P25PG-127R2Z2:1LF 9-18 25 2510 ± 7.2 0 ± 1736 83 ± 1000 P25PG-1209Z2:1LF 9-18 25 2480 ± 9 0 ± 1388 84 ± 680 P25PG-1212Z2:1LF 9-18 30 2480 ± 12 0 ± 1041 84 ± 470 P25PG-1215Z2:1LF 9-18 30 2450 ± 15 0 ± 833 85 ± 330 P25PG-1218Z2:1LF 9-18 35 2450 ± 18 0 ± 694 85 ± 220 P25PG-1224Z2:1LF 9-18 35 2450 ± 24 0 ± 520 85 ± 220 P25PG-243R3Z2:1LF 18-36 25 859 ± 3.3 0 ± 2500 80 ± 1500 P25PG-2405Z2:1LF 18-36 25 1240 ± 5 0 ± 2500 84 ± 1500 P25PG-247R2Z2:1LF 18-36 25 1240 ± 7.2 0 ± 1736 84 ± 1000 P25PG-2409Z2:1LF 18-36 25 1240 ± 9 0 ± 1388 84 ± 680 P25PG-2412Z2:1LF 18-36 25 1225 ± 12 0 ± 1041 85 ± 470 P25PG-2415Z2:1LF 18-36 25 1211 ± 15 0 ± 833 86 ± 330 P25PG-2418Z2:1LF 18-36 25 1211 ± 18 0 ± 694 86 ± 220 P25PG-2424Z2:1LF 18-36 30 1197 ± 24 0 ± 520 87 ± 220 P25PG-483R3Z2:1LF 36-72 20 429 ± 3.3 0 ± 2500 80 ± 1500 P25PG-4805Z2:1LF 36-72 20 620 ± 5 0 ± 2500 84 ± 1500 P25PG-487R2Z2:1LF 36-72 20 620 ± 7.2 0 ± 1736 84 ± 1000 P25PG-4809Z2:1LF 36-72 20 620 ± 9 0 ± 1388 84 ± 680 P25PG-4812Z2:1LF 36-72 20 612 ± 12 0 ± 1041 85 ± 470 P25PG-4815Z2:1LF 36-72 20 598 ± 15 0 ± 833 87 ± 330 P25PG-4818Z2:1LF 36-72 20 598 ± 18 0 ± 694 87 ± 220 P25PG-4824Z2:1LF 36-72 25 598 ± 24 0 ± 520 87 ± 220 If you need other specifications, please enquire. Notes:

PM7L-Series – P25PG-xxxxE/Z2:1LF – Single and Dual Output – 2”x2” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Pin pitch tolerance: +/-0.35 (+/-0.014) Case tolerance +/-0.5 (+/-0.02) # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin 3 +Vout +Vout

4 Omitted Common

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. PEAK PxxPG-xxxxE/Z2:1LF