P20VG-243R3E41LF PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PMNW-Series – P20VG-xxxxE/Z 4:1LF – Single and Dual Output – 1”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P20VG-xxxxE/Z4:1LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 4:1 Wide Input (see table) Input Filter Pi-Type Output Specifications Voltage Accuracy ± 1% Short Circuit Protection Indefinite (hiccup, automatic recovery) Output Voltage Adjustable (trim) ± 10%, max. (only single output) Cross Regulation 1 (dual output) ± 5% Line Regulation ± 0.5%, max. Load Regulation (0% - 100%) ± 0.5%, max. (single) ± 1%, max. (dual) Ripple and Noise (20Mhz bandwidth) 3.3 & 5.0 V: 75mV pk-pk, max Other modules: 100 mV pk-pk, max. Transient Recovery 2 250 us, typ. Transient Response Deviation 2 ± 3%, max. Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1600 VDC I/O Isolation Resistance 1000 MOhm, min. Switching Frequency 330 kHz, typ. Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 560 khrs Physical Specifications Case Material Nickel Coated Copper Weight ~ 19 g, typ. Environment Specifications Operating Temperature -40 to +55° C (for 100%) Maximum Case Temperature 105° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PMNW series is a family of high performance 20W single & dual output DC-DC converters. These are encapsulated in nickel coated copper 1” x 1” case with non conductive base. PMNW-SERIES /checkbld 20 Watt /checkbld 4:1 Wide Input /checkbld 1” x 1” Case /checkbld 1.6 kV DC I/O Isolation /checkbld Reg. Single and Dual Output /checkbld Remote ON/OFF Control /checkbld Continuous Short Circuit Prot. Rev.11-2012

PMNW-Series – P20VG-xxxxE/Z 4:1LF – Single and Dual Output – 1”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single and Dual Output (If you need other specifications, please enquire) Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F ) 3 SINGLE OUTPUT P20VG-243R3E4:1LF 9-36 50 703 3.3 0 4500 88 10000 P20VG-2405E4:1LF 9-36 50 936 5 0 4000 89 5000 P20VG-2412E4:1LF 9-36 22 936 12 0 1670 89 850 P20VG-2415E4:1LF 9-36 22 936 15 0 1330 89 700 P20VG-483R3E4:1LF 18-75 30 352 3.3 0 4500 88 10000 P20VG-4805E4:1LF 18-75 30 468 5 0 4000 89 5000 P20VG-4812E4:1LF 18-75 15 468 12 0 1670 89 850 P20VG-4815E4:1LF 18-75 15 468 15 0 1330 89 700 DUAL OUTPUT P20VG-2412Z4:1LF 9-36 25 936 ± 12 0 ± 833 89 ± 470 P20VG-2415Z4:1LF 9-36 25 936 ± 15 0 ± 667 89 ± 330 P20VG-4812Z4:1LF 18-75 15 468 ± 12 0 ± 833 89 ± 470 P20VG-4815Z4:1LF 18-75 15 468 ± 15 0 ± 667 89 ± 330 Package / Pinning / Derating 25.40 (1.00) 20.32 (0.80) # SINGLE DUAL 1 +Vin +Vin 2 - Vin - Vin

3 CTRL CTRL

5 Trim Common

PMNW-Series – P20VG-xxxxE/Z 4:1LF – Single and Dual Output – 1”x1” - Metal Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 App Notes 1 = One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 2 = Tested by nominal Vin and 25% load step change (75% - 50% - 25% of Io) 3 = Tested by minimal Vin and constant resistive load. 4 = Input filter meets EN 55022 Class A without external components. 5 = An external filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5 EMC SPECIFICATIONS Radiated Emissions EN 55022 CLASS A Conducted Emissions 4 EN 55022 CLASS A ESD EN 61000-4-2 Perf. Criteria A RS EN 61000-4-3 Perf. Criteria A EFT 5 EN 61000-4-4 Perf. Criteria A Surge 5 EN 61000-4-5 Perf. Criteria A CS EN 61000-4-6 Perf. Criteria A PFMF EN 61000-4-8 Perf. Criteria A Over Voltage Protection (Zender diode clamp) 3.3 Vout: 3.9 V 5 Vout 6.2 V

12 Vout 15 V

± 5 Vout ± 6.2 V ± 12 Vout ± 15 V ± 15 Vout ± 18 V Under Input Voltage Lockout (typ.) 24 Vin Models Module ON/OFF 8.6V / 7.9V 48 Vin Models Module ON/OFF 17.8V / 15.5V Remote ON/OFF Control ON: 3 -12 VDC or open circuit OFF: 0 – 1.2 VDC or short circuit PIN2 and PIN3 OFF idle current: 5mA, typ. Notes: Rtrim-up Rtrim-down External Output Trimming Output can be externally trimmed. (Single output models only!)