P14SG-123R3ELF

P14SG-053R3ELF PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

PM5-Series – P14SG-xxxxE/Z(Hxx)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P14SG-xxxxE/Z(Hxx)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Pi Type Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (automatic recovery) Line Regulation ± 0.5% Load Regulation (0% - 100%) ± 1.0%, max (Single) (3.3Vout Models: ± 2%) ± 0.5%, max (Dual – balanced load) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC (up to 6000 VDC optional)* I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency (typical) 40 kHz (Single out); 250 kHz (Dual out) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 12.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM 5 series P14SG -xxxxE/Z(Hxx)LF is a family of cost effective 3 W single and dual output DC/DC converters. These conv erters are encapsulated in an ultra miniature DIP24 case. High performance features: 1000VDC, optional up to 6000VDC input/output isolat ion, high efficiency operation, output voltage accuracy of ±2% maximum, input range of ±10% tolerance and low output ripple and noise. PM5-SERIES /checkbld 3 Watt /checkbld Regulated /checkbld DIP24 Plastic Case /checkbld 1 - 6 kV DC I/O Isolation /checkbld Single and Dual Output /checkbld Continuous Short Circuit Prot. /checkbld Full SMD Techno logy Rev.05-2015

PM5-Series – P14SG-xxxxE/Z(Hxx)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single/Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P14SG-053R3ELF 5 120 720 3.3 600 55 470 P14SG-0505ELF 5 120 923 5 600 65 470 P14SG-0509ELF 5 120 882 9 333 68 470 P14SG-0512ELF 5 120 845 12 250 71 470 P14SG-0515ELF 5 120 845 15 200 71 470 P14SG-0524ELF 5 120 937 24 125 64 470 P14SG-123R3ELF 12 50 284 3.3 600 58 470 P14SG-1205ELF 12 50 384 5 600 65 470 P14SG-1209ELF 12 50 357 9 333 70 470 P14SG-1212ELF 12 50 352 12 250 71 470 P14SG-1215ELF 12 50 342 15 200 73 470 P14SG-1224ELF 12 50 367 24 125 68 470 P14SG-243R3ELF 24 25 142 3.3 600 58 470 P14SG-2405ELF 24 25 192 5 600 65 470 P14SG-2406ELF 24 22 195 6 500 64 470 P14SG-2409ELF 24 25 181 9 333 69 470 P14SG-2412ELF 24 25 173 12 250 72 470 P14SG-2415ELF 24 25 173 15 200 72 470 P14SG-2424ELF 24 25 178 24 125 70 470 DUAL OUTPUT P14SG-053R3ZLF 5 30 825 ± 3.3 ± 400 64 ± 1000 P14SG-0505ZLF 5 30 909 ± 5 ± 300 66 ± 1000 P14SG-0509ZLF 5 40 882 ± 9 ± 167 68 ± 470 P14SG-0512ZLF 5 40 857 ± 12 ± 125 70 ± 470 P14SG-0515ZLF 5 40 857 ± 15 ± 100 70 ± 470 P14SG-0524ZLF 5 60 869 ± 24 ± 63 69 ± 220 P14SG-123R3ZLF 12 15 326 ± 3.3 ± 400 68 ± 1000 P14SG-1205ZLF 12 15 333 ± 5 ± 300 75 ± 1000 P14SG-1209ZLF 12 25 320 ± 9 ± 167 78 ± 470 P14SG-1212ZLF 12 25 312 ± 12 ± 125 80 ± 470 P14SG-1215ZLF 12 25 320 ± 15 ± 100 78 ± 470 P14SG-1224ZLF 12 25 328 ± 24 ± 63 76 ± 220 P14SG-243R3ZLF 24 15 157 ± 3.3 ± 400 70 ± 1000 P14SG-2405ZLF 24 15 162 ± 5 ± 300 77 ± 1000 P14SG-2409ZLF 24 15 160 ± 9 ± 167 78 ± 470 P14SG-2412ZLF 24 15 156 ± 12 ± 125 80 ± 470 P14SG-2415ZLF 24 15 160 ± 15 ± 100 78 ± 470 If you need other specifications, please enquire. *OPTIONS: H30 = 3000 VDC ISOLATION For other I/O Isolation please see table on the left hand side and add “Hxx ” before LF (P14SG-2412E H60 LF for 6KV) H40 = 40 00 VDC ISOLATION H52 = 5200 VDC ISOLATION H60 = 6000 VDC ISOLATION

PM5-Series – P14SG-xxxxE/Z(Hxx)LF – Single and Dual Output – DIP24 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating # SINGLE DUAL SINGLE ≥3KV DUAL ≥3KV 1 +Vin +Vin +Vin +Vin 2 N.C. - Vout +Vin +Vin 3 N.C. Common Omitted Omitted 10 - Vout Common Omitted Common 11 +Vout +Vout Omitted Common 12 - Vin - Vin - Vout Omitted 13 - Vin - Vin +Vout - Vout 14 +Vout +Vout Omitted Omitted 15 - Vout Common Omitted + Vout 22 N.C. Common Omitted Omitted 23 N.C. - Vout - Vin - Vin 24 +Vin +Vin - Vin - Vin PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. EMC Specifications Radiated Emissions EN55022 Class A Conducted Emissions EN55022 Class A ESD IEC 61000-4-2 Perf. Criteria A RS IEC 61000-4-3 Perf. Criteria A EFT IEC 61000-4-4 Perf. Criteria A Surge IEC 61000-4-5 Perf. Criteria A CS IEC 61000-4-6 Perf. Criteria A PFMF IEC 61000-4-8 Perf. Criteria A EMI Filter Input Filter components (C1, C2 = 220uF, 100V and L (12uH)) are used to meet conducted emissions requirement for the converter. The components should be mounted as close as possible. Single Dual