P10NG-0515Z21LF

PC10NG_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PMB-Series – P(C)10NG-xxxxE/Z2:1(H30)LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P(C)10NG-xxxxE/Z2:1(H30)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range 2:1 Wide Input (see table) Input Filter Capacitor Input Reflected Ripple Current¹ 35 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (Automatic Recovery) Line Regulation ± 0.5% Load Regulation (25% - 100%) ± 1% Ripple and Noise (20Mhz bandwidth) 80 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications I/O Isolation Voltage (3 sec.) 1000 VDC (3000 VDC optional)* I/O Isolation Capacity 60 pF I/O Isolation Resistance 1000 M Ohm Switching Frequency 100 - 650 kHz Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 2.732 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 4.5g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM B 2Watt series is a family of cost effective 2W single and dual output DC/DC converters with an optional control Pi n (SIP). These converters are encapsulated in an ultra miniature S IP8 or DIP16 plastic or metal case. High performance features: continuous / long time short circuit protection with automatic restart and tight line / load regulation, high efficiency operation and output voltage accuracy of ±2% maximum. PMB-SERIES /checkbld 2 Watt /checkbld 2:1 Wide Input /checkbld Reg. Single and Dual Output /checkbld 1 - 3 kV DC I/O Isolation /checkbld SIP8 case /checkbld On/Off Control (optional) /checkbld Contin. Short Circuit Protection Rev.12-2008

PMB-Series – P(C)10NG-xxxxE/Z2:1(H30)LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P10NG-053R3E2:1LF 4.5-9 15 492 3.3 125 500 67 3300 P10NG-0505E2:1LF 4.5-9 15 571 5 100 400 70 3300 P10NG-0509E2:1LF 4.5-9 30 555 9 56 222 72 470 P10NG-0512E2:1LF 4.5-9 30 555 12 42 167 72 470 P10NG-0515E2:1LF 4.5-9 30 547 15 33 133 73 470 P10NG-0524E2:1LF 4.5-9 60 533 24 21 83 75 220 P10NG-123R3E2:1LF 9-18 15 205 3.3 125 500 67 3300 P10NG-1205E2:1LF 9-18 15 216 5 100 400 77 3300 P10NG-1209E2:1LF 9-18 15 213 9 56 222 78 470 P10NG-1212E2:1LF 9-18 15 208 12 42 167 80 470 P10NG-1215E2:1LF 9-18 15 213 15 33 133 78 470 P10NG-1224E2:1LF 9-18 15 208 24 21 83 80 220 P10NG-243R3E2:1LF 18-36 8 98 3.3 125 500 70 3300 P10NG-2405E2:1LF 18-36 8 108 5 100 400 77 3300 P10NG-2409E2:1LF 18-36 8 104 9 56 222 80 470 P10NG-2412E2:1LF 18-36 8 104 12 42 167 80 470 P10NG-2415E2:1LF 18-36 8 104 15 33 133 80 470 P10NG-2424E2:1LF 18-36 8 104 24 21 83 80 220 P10NG-483R3E2:1LF 36-72 6 48 3.3 125 500 71 3300 P10NG-4805E2:1LF 36-72 6 56 5 100 400 74 3300 P10NG-4809E2:1LF 36-72 6 53 9 56 222 78 470 P10NG-4812E2:1LF 36-72 6 53 12 42 167 78 470 P10NG-4815E2:1LF 36-72 6 53 15 33 133 78 470 P10NG-4824E2:1LF 36-72 6 52 24 21 83 80 220 If you need other specifications, please enquire. *OPTIONS: Control On/Off For Optional control Pin please add “C” between P and 10 (for example: P C10NG-2424E2:1LF) 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P10NG-2424E2:1 H30LF for 3kV)

PMB-Series – P(C)10NG-xxxxE/Z2:1(H30)LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t M in . L o a d (m A ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P10NG-053R3Z2:1LF 4.5-9 20 471 ± 3.3 ± 63 ± 250 70 ± 1000 P10NG-0505Z2:1LF 4.5-9 20 571 ± 5.0 ± 50 ± 200 70 ± 1000 P10NG-0509Z2:1LF 4.5-9 20 540 ± 9.0 ± 28 ± 111 74 ± 220 P10NG-0512Z2:1LF 4.5-9 25 533 ± 12.0 ± 21 ± 83 75 ± 220 P10NG-0515Z2:1LF 4.5-9 25 533 ± 15.0 ± 17 ± 67 75 ± 220 P10NG-0524Z2:1LF 4.5-9 60 563 ± 24.0 ± 10 ± 42 71 ± 100 P10NG-123R3Z2:1LF 9-18 15 188 ± 3.3 ± 63 ± 250 73 ± 1000 P10NG-1205Z2:1LF 9-18 15 222 ± 5.0 ± 50 ± 200 75 ± 1000 P10NG-1209Z2:1LF 9-18 15 210 ± 9.0 ± 28 ± 111 79 ± 220 P10NG-1212Z2:1LF 9-18 15 208 ± 12.0 ± 21 ± 83 80 ± 220 P10NG-1215Z2:1LF 9-18 15 210 ± 15.0 ± 17 ± 67 79 ± 220 P10NG-1224Z2:1LF 9-18 30 219 ± 24.0 ± 10 ± 42 76 ± 100 P10NG-243R3Z2:1LF 18-36 8 94 ± 3.3 ± 63 ± 250 73 ± 1000 P10NG-2405Z2:1LF 18-36 8 106 ± 5.0 ± 50 ± 200 78 ± 1000 P10NG-2409Z2:1LF 18-36 8 105 ± 9.0 ± 28 ± 111 79 ± 220 P10NG-2412Z2:1LF 18-36 8 104 ± 12.0 ± 21 ± 83 80 ± 220 P10NG-2415Z2:1LF 18-36 8 104 ± 15.0 ± 17 ± 67 80 ± 220 P10NG-2424Z2:1LF 18-36 20 106 ± 24.0 ± 10 ± 42 78 ± 100 P10NG-483R3Z2:1LF 36-72 6 47 ± 3.3 ± 63 ± 250 73 ± 1000 P10NG-4805Z2:1LF 36-72 6 56 ± 5.0 ± 50 ± 200 74 ± 1000 P10NG-4809Z2:1LF 36-72 6 53 ± 9.0 ± 28 ± 111 79 ± 220 P10NG-4812Z2:1LF 36-72 6 53 ± 12.0 ± 21 ± 83 79 ± 220 P10NG-4815Z2:1LF 36-72 6 52 ± 15.0 ± 17 ± 67 80 ± 220 P10NG-4824Z2:1LF 36-72 12 55 ± 24.0 ± 10 ± 42 75 ± 100 If you need other specifications, please enquire. *OPTIONS: Control On/Off For Optional control Pin please add “C” between P and 10 (for example: P C10NG-2424Z2:1LF) 3 kV I/O Isolation For optional 3kV DC I/O Isolation, please add “H30” before LF! (P10NG-2424Z2:1 H30LF for 3kV)

PMB-Series – P(C)10NG-xxxxE/Z2:1(H30)LF – Single / Dual Output – SIP8 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating 3,50 (0.14) 0.25 (0.01) 11.10 (0.44) 0.50 (0.02) 3.05 (0.12) # SINGLE DUAL SINGLE "C" DUAL "C" 1 - Vin - Vin - Vin - Vin 2 +Vin +Vin +Vin +Vin 3 Omitted N.C. Ctrl. Ctrl. 6 +Vout +Vout +Vout +Vout 7 - Vout - Vout - Vout - Vout 8 N.C. Common N.C. Common (Same pinning for 3kv I/O isolation) PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH ² = Tested by nominal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. MCU (Master Control Unit) The MCU Pin Voltage is referenced to –Vin (Pin1) ON: 0 – 0.8 VDC / open / short circuit Pin1 and Pi n3 OFF: 5 VDC OFF idle current: 5mA, typ.