P10LU

P10LU_14 PEAK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

PM3-Series – P10LU-xxxxE/Z(Hxx)LF – Single and Dual Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/4 P10LU-xxxxE/Z(Hxx)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitor Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3 Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See table I/O Isolation Voltage (3 sec.) 3000 VDC (up to 6000 VDC optional)* I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 80 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) >1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 2.3g, typ. Environment Specifications Operating Temperature -40 to +85 ° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection (10 mm distance required) RoHS Conform Soldering 260° C, max. (1.5 mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM3 series P10LU -xxxxE/Z(Hxx)LF is a family of cost effective 2 W single & dual output DC-DC converters. These conver ters are in an ultra miniature SIP7 case. Devices are encapsulated. High performance features: 3000VDC up to 6000VDC input/output isolat ion, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. PM3-SERIES /checkbld 2 Watt /checkbld Unregulated /checkbld Single and Dual Output /checkbld SIP7 Case /checkbld 3 - 6 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.02-2009

PM3-Series – P10LU-xxxxE/Z(Hxx)LF – Single and Dual Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/4 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P10LU-053R3ELF 5 30 367 3.3 400 72 470 P10LU-0505ELF 5 30 512 5 400 78 470 P10LU-057R2ELF 5 30 500 7.2 277.7 80 470 P10LU-0509ELF 5 30 500 9 222.2 80 470 P10LU-0512ELF 5 30 487 12 166.7 82 470 P10LU-0515ELF 5 30 487 15 133.3 82 470 P10LU-0518ELF 5 30 487 18 111.1 82 470 P10LU-0524ELF 5 30 487 24 83.3 82 470 P10LU-123R3ELF 12 36 169 3.3 400 65 470 P10LU-1205ELF 12 20 216 5 400 77 470 P10LU-127R2ELF 12 20 208 7.2 277.7 80 470 P10LU-1209ELF 12 20 208 9 222.2 80 470 P10LU-1212ELF 12 20 203 12 166.7 82 470 P10LU-1215ELF 12 20 203 15 133.3 82 470 P10LU-1218ELF 12 20 208 18 111.1 80 470 P10LU-1224ELF 12 20 208 24 83.3 80 470 P10LU-243R3ELF 24 10 76 3.3 400 72 470 P10LU-2405ELF 24 10 105 5 400 79 470 P10LU-247R2ELF 24 10 104 7.2 277.7 80 470 P10LU-2409ELF 24 10 104 9 222.2 80 470 P10LU-2412ELF 24 10 102 12 166.7 80 470 P10LU-2415ELF 24 10 101 15 133.3 82 470 P10LU-2418ELF 24 10 101 18 111.1 82 470 P10LU-2424ELF 24 10 104 24 83.3 80 470 P10LU-483R3ELF 48 6 45 3.3 400 60 470 P10LU-4805ELF 48 6 54 5 400 77 470 P10LU-487R2ELF 48 6 54 7.2 277.7 77 470 P10LU-4809ELF 48 6 54 9 222.2 77 470 P10LU-4812ELF 48 6 53 12 166.7 78 470 P10LU-4815ELF 48 6 53 15 133.3 78 470 P10LU-4818ELF 48 6 53 18 111.1 78 470 P10LU-4824ELF 48 6 55 24 83.3 75 470 If you need other specifications, please enquire. *OPTIONS: H40 = 4000 VDC ISOLATION H52 = 5200 VDC ISOLATION H60 = 6000 VDC ISOLATION For other I/O Isolation please see table on the left hand side and add “Hxx ” before LF (P10LU-2412E H60 LF for 6KV)

PM3-Series – P10LU-xxxxE/Z(Hxx)LF – Single and Dual Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/4 Selection Guide Dual Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² DUAL OUTPUT P10LU-053R3ZLF 5 30 406 ± 3.3 ± 200 65 ± 220 P10LU-0505ZLF 5 30 555 ± 5 ± 200 72 ± 220 P10LU-057R2ZLF 5 30 555 ± 7.2 ± 138.8 72 ± 220 P10LU-0509ZLF 5 30 519 ± 9 ± 111.1 77 ± 220 P10LU-0512ZLF 5 30 512 ± 12 ± 83.3 78 ± 220 P10LU-0515ZLF 5 30 500 ± 15 ± 66.67 80 ± 220 P10LU-0518ZLF 5 30 500 ± 18 ± 55.55 80 ± 220 P10LU-0524ZLF 5 30 500 ± 24 ± 41.67 80 ± 220 P10LU-123R3ZLF 12 20 164 ± 3.3 ± 200 67 ± 220 P10LU-1205ZLF 12 20 222 ± 5 ± 200 75 ± 220 P10LU-127R2ZLF 12 20 219 ± 7.2 ± 138.8 76 ± 220 P10LU-1209ZLF 12 20 216 ± 9 ± 111.1 77 ± 220 P10LU-1212ZLF 12 20 203 ± 12 ± 83.3 82 ± 220 P10LU-1215ZLF 12 20 203 ± 15 ± 66.67 82 ± 220 P10LU-1218ZLF 12 20 203 ± 18 ± 55.55 82 ± 220 P10LU-1224ZLF 12 20 203 ± 24 ± 41.67 82 ± 220 P10LU-243R3ZLF 24 10 80 ± 3.3 ± 200 68 ± 220 P10LU-2405ZLF 24 10 111 ± 5 ± 200 75 ± 220 P10LU-247R2ZLF 24 10 111 ± 7.2 ± 138.8 75 ± 220 P10LU-2409ZLF 24 10 104 ± 9 ± 111.1 80 ± 220 P10LU-2412ZLF 24 10 101 ± 12 ± 83.3 82 ± 220 P10LU-2415ZLF 24 10 101 ± 15 ± 66.67 82 ± 220 P10LU-2418ZLF 24 10 101 ± 18 ± 55.55 82 ± 220 P10LU-2424ZLF 24 10 101 ± 24 ± 41.67 82 ± 220 P10LU-483R3ZLF 48 6 45 ± 3.3 ± 200 60 ± 220 P10LU-4805ZLF 48 6 57 ± 5 ± 200 73 ± 220 P10LU-487R2ZLF 48 6 54 ± 7.2 ± 138.8 77 ± 220 P10LU-4809ZLF 48 6 54 ± 9 ± 111.1 77 ± 220 P10LU-4812ZLF 48 6 52 ± 12 ± 83.3 80 ± 220 P10LU-4815ZLF 48 6 52 ± 15 ± 66.67 80 ± 220 P10LU-4818ZLF 48 6 52 ± 18 ± 55.55 80 ± 220 P10LU-4824ZLF 48 6 52 ± 24 ± 41.67 80 ± 220 If you need other specifications, please enquire. *OPTIONS: H40 = 4000 VDC ISOLATION H52 = 5200 VDC ISOLATION H60 = 6000 VDC ISOLATION For other I/O Isolation please see table on the left hand side and add “Hxx ” before LF (P10LU-2412ZH60 LF for 6KV)

PM3-Series – P10LU-xxxxE/Z(Hxx)LF – Single and Dual Output – SIP7 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 4/4 Package / Pinning / Derating Modelcode Datecode 1 2 4 5 6 7 6.00* (0.24)19.50 (0.76) 15.24 (0.60) 2.54 (0.10) 0.50 (0.02) 0.50 (0.02) 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. * The thickness of 48Vin voltage is 7.20(0.28) PE AK SIP 7 – PLASTIC CASE # SINGLE ≥3KV DUAL ≥3KV 1 +Vin +Vin 2 - Vin - Vin

4 Omitted Omitted

6 Omitted Common

App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - For reduce converter’s ripple & noise, it is recommended to add a 4.7 µF~220µF(±4.7 µF~±100 µF for dual output) capacitor in output end. For EMI performance improvement, it is recommended to add a 12 µH inductor and a 10 µF~100 µF capacitor in input end.