P10GG_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PMF-Series – P10GG-xxxxE(Hxx)LF – Single Output – S IP12 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P10GG-xxxxE(Hxx)LF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 2% Short Circuit Protection Indefinite (Automatic Recovery) Line Regulation ± 0.5% Load Regulation (0% - 100%) ± 0.5% (3.3Vout Models: ± 1.5%) Ripple and Noise (20Mhz bandwidth) 75 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC (up to 5200 VDC optional*) I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 M Ohm Switching Frequency 50 kHz (typ.) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.12 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 7.2g, typ. Environment Specifications Operating Temperature -25 to +71° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM F series P 10 G G -xxxxE (Hxx) LF is a family of cost effective 2 W regulated single output DC/DC converters. These con verters are in an ultra miniature SIP12 case. Devices are encapsulated. Hig h performance features: Regulated Output, 1000VDC up to 5200VDC i nput/output isolation, high efficiency operation, output voltag e accuracy of ±2% maximum and input range of ±10% tolerance. PMF-SERIES /checkbld 2 Watt /checkbld Regulated /checkbld Single Output /checkbld SIP 12 Case /checkbld 1 kV up to 5.2kV DC I/O Isolation /checkbld Cont. Short Circuit Protection Rev.02-2009

PMF-Series – P10GG-xxxxE(Hxx)LF – Single Output – S IP12 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (%) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P10GG-053R3ELF 5 70 515 3.3 500 64 330 P10GG-0505ELF 5 70 606 5 400 66 330 P10GG-057R2ELF 5 70 606 7.2 277.7 66 330 P10GG-0509ELF 5 70 597 9 222.2 67 330 P10GG-0512ELF 5 80 597 12 166.6 67 330 P10GG-0515ELF 5 80 597 15 133.3 67 330 P10GG-0518ELF 5 80 597 18 111.1 67 330 P10GG-0524ELF 5 80 579 24 83.3 69 330 P10GG-123R3ELF 12 30 214 3.3 500 64 330 P10GG-1205ELF 12 30 252 5 400 66 330 P10GG-127R2ELF 12 30 252 7.2 277.7 66 330 P10GG-1209ELF 12 45 248 9 222.2 67 330 P10GG-1212ELF 12 45 248 12 166.6 67 330 P10GG-1215ELF 12 45 248 15 133.3 67 330 P10GG-1218ELF 12 50 245 18 111.1 68 330 P10GG-1224ELF 12 50 245 24 83.37 68 330 P10GG-243R3ELF 24 25 107 3.3 500 64 330 P10GG-2405ELF 24 25 124 5 400 67 330 P10GG-247R2ELF 24 25 124 7.2 277.7 67 330 P10GG-2409ELF 24 25 122 9 222.2 68 330 P10GG-2412ELF 24 25 122 12 166.6 68 330 P10GG-2415ELF 24 25 122 15 133.3 68 330 P10GG-2418ELF 24 25 120 18 111.1 69 330 P10GG-2424ELF 24 25 120 24 83.3 69 330 If you need other specifications, please enquire. *OPTIONS: H30 = 3000 VDC ISOLATION H52 = 5200 VDC ISOLATION For other I/O Isolation please see table on the left hand side and add “Hxx ” before LF (P10GG-2412E H52 LF for 5.2kV) Notes:

PMF-Series – P10GG-xxxxE(Hxx)LF – Single Output – S IP12 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating 2.50 (0.10) 14.00 (0.55) 8.00 (0.32) 3.05 (0.12) 0.30 (0.01) PEAK Modelcode Datecode 1 12 32.00 (1.26) 27.94 (1.10) 2.54 (0.10) 0.50 (0.02) 3.40 (0.13) 0.68 (0.03) 0.50 (0.02) 3.40 (0.13) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. # SINGLE SINGLE ≥3kV 1 +Vin +Vin 2 N.C. - Vin 3 N.C. N.C. 9 N.C. N.C. 10 - Vout - Vout 11 +Vout +Vout 12 - Vin N.C. PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load.