P10AU_14 PEAK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

PME-Series – P10AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 1/3 P10AU-xxxxELF All specifications typical at Ta=25° C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range ± 10% Input Filter Capacitors Input Reflected Ripple Current¹ 20 mA pk-pk Output Specifications Voltage Accuracy ± 3% Short Circuit Protection Short Term Line Regulation ± 1.2% / 1% Vin Change Load Regulation (20% - 100%) ± 10% (3.3Vout Models: ± 20%) Ripple and Noise (20Mhz bandwidth) 150 mV pk-pk Temperature Coefficient ± 0.02% / ° C General Specifications Efficiency See Table I/O Isolation Voltage (3 sec.) 1000 VDC I/O Isolation Capacity 60 pF, typ. I/O Isolation Resistance 1000 MOhm Switching Frequency 70 kHz (Variable) Humidity 95% rel H Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs Physical Specifications Case Material Non Conductive Black Plastic (UL94V-0 rated) Potting Material Epoxy (UL94V-0 rated) Weight ~ 1.8g, typ. Environment Specifications Operating Temperature -40 to +85° C (ambient) Maximum Case Temperature 100° C Storage Temperature -40 to +125° C Cooling Free Air Convection RoHS Conform Soldering 260° C, max. (1.5mm from case 10s.) Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de peak@peak-electronics.de The PM E series P 10A U -xxxxELF is a family of cost effective 2 W single output DC/DC converters. These converters are in an ultra miniature SIP4 case. Devices are encapsulated. High performance fe atures: 1000VDC input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. PME-SERIES /checkbld 2 Watt /checkbld Unregulated /checkbld Single Output /checkbld SIP4 Case /checkbld 1 kV DC I/O Isolation /checkbld Low Ripple and Noise Rev.01-2009

PME-Series – P10AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 2/3 Selection Guide Single Output Order # In p u t V o lta g e (V D C ) In p u t C u rre n t N o L o a d (m A ) In p u t C u rre n t F u ll L o a d (m A ) O u tp u t V o lta g e (V D C ) O u tp u t C u rre n t F u ll L o a d (m A ) E ffic ie n c y (% ) C a p a c ito r L o a d (u F )² SINGLE OUTPUT P10AU-053R3ELF 5 35 371 3.3 400 71 470 P10AU-0505ELF 5 35 519 5 400 77 470 P10AU-057R2ELF 5 35 519 7.2 278 77 470 P10AU-0509ELF 5 35 500 9 222 80 470 P10AU-0512ELF 5 35 487 12 167 82 470 P10AU-0515ELF 5 35 487 15 133 82 470 P10AU-0518ELF 5 35 487 18 111 82 470 P10AU-0524ELF 5 35 487 24 83 82 470 P10AU-123R3ELF 12 20 152 3.3 400 72 470 P10AU-1205ELF 12 20 213 5 400 78 470 P10AU-127R2ELF 12 20 208 7.2 278 80 470 P10AU-1209ELF 12 20 203 9 222 82 470 P10AU-1212ELF 12 20 198 12 167 84 470 P10AU-1215ELF 12 20 198 15 133 84 470 P10AU-1218ELF 12 20 198 18 111 84 470 P10AU-1224ELF 12 25 203 24 83 82 470 P10AU-153R3ELF 15 18 120 3.3 400 73 470 P10AU-1505ELF 15 18 170 5 400 78 470 P10AU-157R2ELF 15 18 166 7.2 278 80 470 P10AU-1509ELF 15 18 162 9 222 82 470 P10AU-1512ELF 15 18 158 12 167 84 470 P10AU-1515ELF 15 18 158 15 133 84 470 P10AU-1518ELF 15 18 158 18 111 84 470 P10AU-1524ELF 15 18 162 24 83 82 470 P10AU-243R3ELF 24 10 74 3.3 400 74 470 P10AU-2405ELF 24 10 104 5 400 80 470 P10AU-247R2ELF 24 10 104 7.2 278 80 470 P10AU-2409ELF 24 10 99 9 222 84 470 P10AU-2412ELF 24 10 99 12 167 84 470 P10AU-2415ELF 24 10 99 15 133 84 470 P10AU-2418ELF 24 10 99 18 111 84 470 P10AU-2424ELF 24 10 99 24 83 84 470 P10AU-483R3ELF 48 7 38 3.3 400 72 470 P10AU-4805ELF 48 7 53 5 400 78 470 P10AU-487R2ELF 48 7 52 7.2 278 80 470 P10AU-4809ELF 48 7 51 9 222 82 470 P10AU-4812ELF 48 7 52 12 167 80 470 P10AU-4815ELF 48 7 51 15 133 82 470 P10AU-4818ELF 48 7 51 18 111 82 470 P10AU-4824ELF 48 7 51 24 83 82 470 If you need other specifications, please enquire.

PME-Series – P10AU-xxxxELF – Single Output – SIP4 - Plastic Case Specification can change without a notice – We acce pt no liability for any inaccuracy or printing errors. Page 3/3 Package / Pinning / Derating Modelcode Datecode 1 2 3 4 11.68 (0.46) 9.65 (0.38) 3.05 (0.12) 2.54 (0.10) Bottom View 1 2 3 4 2.00 (0.08) 0.50 (0.02) 7.50 (0.29) 0.50 (0.02) 0.50 (0.02) 0.50 (0.02) 0.25 (0.01) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. PE AK SIP4 – PLASTIC CASE # SINGLE 1 - Vin 2 +Vin 3 - Vout 4 +Vout PIN CONNECTIONS App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. - For reduce converter’s ripple & noise, it is recommended to add a 4.7 µF~220µF capacitor in output end. For EMI performance improvement, it is recommended to add a 12 µH inductor and a 10 µF~100µF capacitor in input end. EMC SPECIFICATIONS Radiated Emissions EN 55022 FCC 47CFR Part 15/B CLASS B CLASS B ESD IEC 61000-4-2 Perf. Criteria B RS IEC 61000-4-3 Perf. Criteria A