OVLGB0C6B9

OVLGB0C6B9 TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 1 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each device in the OVLG Series is a high intensity LED mounted in a clear plastic T-1¾ package. Each device incorporates an integral molded lens that enables a narrow beam angle and provides an even emission pattern. Designed to produce light over a wide range of drive currents, these LEDs are useful in applications that require a higher on -axis brightness than that achievable with standard lamps. Applications:  Indoor/outdoor applications  Variable message boards  Store front signage Features:  Narrow beam angle  High brightness LED  Water clear plastic package  UV resistant epoxy Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVLGB0C6B9 Blue 7,200 Clear InGaN OVLGC0C6B9 23,000 Blue-Green OVLGS0C8B9 AlInGaP 14,000 Red OVLGY0C9B9 14,000 Yellow DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY RoHS

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 2 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Continuous Forward Current Blue, Blue-Green 25 mA Red, Yellow 50 mA 100 mA Peak Forward Current (10% Duty Cycle, 1 kHz) Power Dissipation Blue, Blue-Green 100 mW Red, Yellow 120 mW Current Linearity vs Ambient Temperature Blue, Blue-Green -0.29 mA/° C Red, Yellow -0.72 mA/° C LED Junction Temperature 125° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Lead Soldering Temperature (3 mm from the base of the epoxy bulb)1 260° C / 5 seconds Electrical Characteristics (TA = 25o C unless otherwise noted) SYMBOL PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity mcd IF = 20 mA Blue-Green 11,970 23,000 ---- Yellow 8,550 14,000 ---- VF Forward Voltage Blue 2.6 3.2 4.0 V IF = 20 mA Blue-Green Red 1.8 2.0 2.4 Yellow IR Reverse Current Blue ---- ---- 10 µA VR = 5 V Blue-Green Red Yellow λD Dominant Wavelength Blue 460 470 475 nm IF = 20 mA Blue-Green 499 505 511 Red 620 623 630 Yellow 585 589 595 2Θ½H-H 50% Power Angle Blue ---- 15 ---- deg IF = 20 mA Blue-Green ---- 15 ---- Red ---- 8 ---- Yellow ---- 8 ----

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 3 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Typical Electro-Optical Characteristics Curves—Blue & Blue-Green

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 4 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Typical Electro-Optical Characteristics Curves—Red & Yellow

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 5 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Beam Angle: Packaging: 500 pcs per anti-static bag with desiccant Desiccant Barcode Label

High-Intensity LED in Plastic T-1¾ Package OVLGx0CyB9 Series © TT electronics plc Issue D 08/2017 Page 6 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Symbol Test Conditions Criteria for Judgment Test Item Min. Max Luminous Intensity IV IF = 20mA LSLx0.7 ** Forward Voltage VF IF = 20mA USLx1.1 * 2. Failure Criteria (TA = 25°C): ( * ) USL: Upper Standard Level, ( ** ) LSL: Lower Standard Level Reliability Test LED lamps are checked by reliability tests based on MIL standards. 1. Test Conditions, Acceptable Criteria & Results Classification Test Item Std. Test Method Test Conditions Duration Unit Acc / Rej Criteria Result Life Test Operation Life Test (OLT) MIL-STD-750D Method 1026.3 TA=25°C , IF=30mA * 1000 Hrs 100 0 / 1 Pass High Temperature Storage (HTS) MIL-STD-750D Method 1032.1 TA=100°C 1000 Hrs 100 0 / 1 Pass Low Temperature Storage (LTS) MIL-STD-750D Method 1032.1 TA=—40°C 1000 Hrs 100 0 / 1 Pass Temp. & Humidity with Bias (THB) MIL-STD-750D Method 103B TA=85°C , Rh=85% IF=20mA 500 Hrs 100 0 / 1 Pass Thermal Shock Test (TST) MIL-STD-750D Method 1056.1 0°C ~ 100°C 2min 2min 100 cycles 100 0 / 1 Pass Temperature Cy- cling Test (TCT) MIL-STD-750D Method 1051.5 30min 5min 30min 5min 100 cycles 100 0 / 1 Pass Solderability MIL-STD-750D Method 2026.4 235±5°C , 5 sec. 1 time 20 0 / 1 Pass Resistance to Sol- dering Heat MIL-STD-750D Method 2031.1 260±5°C , 5 sec. 1 time 20 0 / 1 Pass Lead Integrity MIL-STD-750D Method 2036.3 Load 2.5N (0.25kgf) 0°~90°~0° , bend 3 times 20 0 / 1 Pass Environmental Test Mechanical Test Remark: ( * ) IF = 30mA for AllnGaP chip; IF = 20mA for InGan chip ( ** ) IF = 20mA for AllnGaP chip; IF = 10mA for InGan chip