OVFSQ4C8 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 1 of 4 4-Pin Red-Orange LED Lamp (7.6 mm) OVFSQ4C8 x Packaged in tubes x Compatible with automatic placement equipment x Compatible with infrared and vapor phase reflow solder process x Mono-color type x Pb-free The OVFSQ4C8 is designed with higher forward voltage to maximize brightness and incorporates a low-profile lens to enhance efficient light distribution. Response time is fast and it consumes less power resulting in low current requirements from circuit power supply. Tubular arrays replace neon in outdoor and indoor signs. This square package allows high-density arrays to form light engines.

Applications

x Automotive: Rear stop/turn signal lamps/truck marker lamps x Mood-setting decoration and landscape lighting x Special decorative interior/exterior lighting x Special effects stage lighting x Illumination for signs and channel letters x Traffic signals, pedestrian and walkway signs Product Photo Here Part Number Material Emitted Color Flux Typ. mlm OVFSQ4C8 AlInGaP Red-Orange 4500 Lens Color Water Clear 2,3 ANODE 1,4 CATHODE DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. RoHS Moisture

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 2 of 4 4-Pin Red-Orange LED Lamp OVFSQ4C8 Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Lead Soldering Temperature (3 mm from the base of the epoxy bulb)1 260° C Reverse Voltage 5 V Continuous Forward Current2 70 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 200 mA Power Dissipation 220 mW Absolute Maximum Ratings TA = 25o C unless otherwise noted Notes: 1. Solder time less than 5 seconds at temperature extreme. 2. Heat sink is adequate if the device is operated at ambient temperature higher than 25°C. For long term performance the drive currents between 10 mA and 50 mA are recommended. Please contact an Optek sales representative for more information on recommended drive conditions.

Electrical Characteristics

TA = 25o C unless otherwise noted SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS lumen Luminous Flux 3000 4500 ---- mlm IF = 70 mA VF Forward Voltage ---- 2.6 3.2 V IF = 70 mA IR Reverse Current ---- ---- 100 µA VR = 5 V D Dominant Wavelength 612 618 628 nm IF = 70 mA 2 ½ 50% Power Angle ---- 40 ---- deg IF = 70 mA Standard Bins (IF = 70 mA) Lamps are sorted to luminous flux ( V), forward voltage (VF), and dominant wavelength ( D) bins shown. Orders for OVFSQ4C8 may be filled with any or all bins contained as below. Rank V4 V5 V6 V7 V8 Forward Voltage (VF) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 5000-7300 M 4000-6100 L 3500-4800 K 3000-4200 J Luminous flux is at J bin or above. 612 Dominant Wavelength (nm) 628 Luminous Flux mlm)

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 3 of 4 4-Pin Red-Orange LED Lamp OVFSQ4C8 Typical Electro-Optical Characteristics Curves Relative Luminous Flux vs Wavelength nm Half Power WL = 23 nm Far Field Pattern 50% Power Angle: 40° Forward Current vs Forward Voltage V mA Relative Luminous Flux vs Forward Current mA Maximum Forward DC Current vs Ambient Temperature mA V Reverse Current vs Reverse Voltage A

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A 04/06 Page 4 of 4 4-Pin Red-Orange LED Lamp OVFSQ4C8 Moisture Resistant Packaging 60/Tube Aluminum Moisture-proof Bag Desiccant Bar Code Label