OPV302 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
© TT electronics plc Issue A 09/2016 Page 1 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com Description: The OPV302 is a Vertical Cavity Surface Emitting Laser (VCSEL) packaged in a dome lens TO -46 package. VCSELs offer many advantages in sensing applications when compared to infrared LEDs. These devices require substantially lower drive currents to obtain the same amount of output power as LEDs. This feature allows VCSELs to be used in low power consumption applications such as battery operated equipment. The dome lens packaging creates a narrow beam angle from the device. Long distance applications may benefit from this feature as secondary optics may be eliminated, reducing total system cost. The OPV302 is optically and spectrally compatible with Optek’s standard detector products such as the OP800 series phototransistors, OP830 series photodarlingtons and the OP910 photodiode. Applications: Non-contact position sensing Photoelectric sensors Optical encoders Light curtains Features: 850nm VCSEL technology High thermal stability Low drive current High output power Narrow beam angle
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue A 09/2016 Page 2 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com OPV302 Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage temperature range -40° to +100°C Operating temperature range 0° to +85°C Lead soldering temperature [1/16 inch (1.6mm) from case for 5 sec with soldering iron] 260°C Maximum forward peak current, continuous 12 mA Maximum reverse voltage 5 V Maximum forward current, pulsed (1 µs P.W., 10% D.C.) 48 mA Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS POT Total power out 1.5 mW IF = 7 mA ITH Threshold current 3.0 mA Note 2 VF Forward voltage 2.2 V IF = 7 mA IR Reverse current 100 nA VR = 5 V RS Series resistance 20 55 Ohms Note 3 ɳ Slope efficiency 0.28 mW/mA Note 4 λ Wavelength 840 860 Nm ∆λ Optical bandwidth 0.85 Nm Ɵ Beam divergence 4 Degrees FWHM ∆ɳ/∆T Temp coefficient of slope efficiency -0.50 %/°C (0° - 70°C), Note 4 ∆λ/∆T Temp coefficient of wavelength 0.06 Nm/°C (0° - 70°C), ∆ITH Temp variance of threshold current ±1.0 mA (0° - 70°C), Note 2 ∆VF/∆T Temp coefficient for forward voltage -2.5 mV/°C (0° - 70°C)
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue A 09/2016 Page 3 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com OPV302