OPR5911 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
© TT Electronics plc Issue D 7/2017 Page 1 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each OPR5911 device is a four-element photodiode that is enclosed in a compact polyimide chip carrier and designed for a variety of encoder and control applications. The single chip construction ensures excellent matching and very tight dimensional tolerances between active areas. The custom opaque package shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering conditions, while the wraparound gold -plated solder pads offer exceptions storage and wetting characteristics. All cathodes in the OPR5911 are bonded together, which enables the elements to act in unison with limited external circuitry. See Application Bulletin 237 for handling considerations. Applications: Encoder applications Control applications Features: Surface mountable Closely matched responsivity High temperature operation Common cathode connections
Ordering Information
Number Receiver Type # of Elements Responsivity (mA/mW) Min. Reverse Voltage Min. Active Area (mm2) Packaging OPR5911 Photodiode Array 4 0.45 14 1.61 (each) Chip Tray OPR5911 Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. Pin # Function Pin # Function
1 Anode 1 7 Anode 3
2 Common Cathode 8 Common Cathode
5 Common Cathode 11 Common Cathode
6 Anode 2 12 Anode 4
SPECIFIED, ALL TOLERANCES ARE ±.005”
© TT Electronics plc Issue D 7/2017 Page 2 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature -55° C to +125° C Reverse Breakdown Voltage 14 V / minute Solder reflow time within 5°C of peak temperature is 20 to 40 seconds(1) 250° C Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS R Responsivity 0.45 — — A/W Ee = 10 µW, = 850 nm, VR = 0 VBR Reverse Breakdown Voltage 14 — — V IR = 100 µA ID Reverse Dark Current — — 30 nA VR = 10 V CT Capacitance — 10 — pF VR = 10 V L X W Active Area (per diode) — 1.61 — mm2 (1.27 mm x 1.27 mm) Spectral Responsivity Relative Response (%) Wavelength (µm) 100 Notes: 1. Solder time less than 5 seconds at temperature extreme.
© TT Electronics plc Issue D 7/2017 Page 3 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Packaging Orientation
© TT Electronics plc Issue D 7/2017 Page 4 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue Change Description Approval Date Initial Release 08/1996 A Put in new format 08/14/2006 A.1 Add Application Bulletin 237 note. Add pressure sensitivity warning. Add packaging to Ordering Information chart. Harry Whitford 4/17/2009 A.2 Separate OPR5911 and OPR5925. Add new photo Harry Whitford 4/28/2009 B Change E to Ee; R to R and V(BR)R to VBR in the Electrical Characteristics table. Change 1 to 1.27 for the L X W, TYP on the Electrical Characteristics table. Change 1 to 1.61 under Active Area on the Ordering Information table. Harry Whitford 3/20/2012 C Update to TTE format. Correct die array pitch from .075 to .060. mm (1.61 mm2). Harry Whitford 6/10/2012