OPIA814 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 17

Technical content

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 1 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 RoHS Description: The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photodarlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation voltage of 5,000 Volts(RMS), these products meet typical power system isolation requirements. Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation between two power systems while maintaining the ability to transmit information from one power system to the other. In many applications, analog signal levels may be required to be transmitted between two power systems while maintaining isolation between the power systems up to 5,000 volts(RMS). A variety of LED and photosensor configurations are available depending on the system requirements. The ratio Current Transfer Ratio (CTR) is determined by using the output current and input current for analog photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device. All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number. Example: OPIA817DTUE is a 4-Pin DIP shipped in a tube (TU). Features:

  • 5,000 Vrms electrical isolation
  • Choice of a Single and Dual LED
  • Phototransistor or Photodarlington Sensor
  • Low-cost plastic Dual-In-Line (DIP) package Approval Agency:
  • UL Certification No: E58730
  • VDE No: 40026625 40026536, 40026654 Applications:
  • High voltage isolation: 5,000 Volts RMS
  • PCBoard power system isolation
  • Industrial equipment power isolation
  • Medical equipment power isolation
  • Office equipment 200100*10 20 ==− −= mA mA CurrentLED CurrentrPhotosensoCTR

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 2 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 Analog Output Devices Ordering Information Part Number Isolation Voltage Max. (Vrms) CTR Min/Typ/Max Typ. Tr / Tf (µs) RL = 100 ohms Package Configuration OPIA817D 5,000 50 / - / 600 4 / 3 4-Pin DIP A K—C E OPIA814D 5,000 60 / - / 600 5 / 4 4-Pin DIP A K, K A—C E OPIA815D 5,000 70 / - / - 80 / 72 4-Pin DIP A K—C E (Dar) OPIA4010D 5,000 600 / - / 9,000 60 / 50 4-Pin DIP A K—C E (Dar) OPIA1210D 5,000 50 / - / 600 2 / 3 4-Pin DIP A K—C E Configuration: Definition of Terms LED Identification—Sens or Identification Configuration Information LED A = Anode K = Cathode Sensor B = Base C = Collector E = Emitter (Dar) = Photodarlington Packaging Part Number Suffix: TU = Shipped in Tubes Example: OPIA817DTUE Part Number Pin # 1 2 3 4 OPIA817 A K E C OPIA814 A-K K-A E C OPIA815 A K E C OPIA4010 A K E C OPIA1210 A K E C Package Outline Dimensions and Schematics: Top-View

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 3 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature -55° C to +125° C Operating Temperature -30° C to +100° C Isolation voltage (1 minute) 5,000 Vrms Total Package Power Dissipation 200 mW Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C Input Diode Continuous Forward Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 1 A Reverse Voltage OPIA817, OPIA815, OPIA4010, OPIA1210 OPIA814, OPIA4010 6 V Power Dissipation 70 mW Output Phototransistor Collector-Emitter Voltage OPIA817, OPIA814 OPIA4010 OPIA815 OPIA1210 60 V 300 V 35 V 350 V Emitter-Collector Voltage OPIA817, OPIA814, OPIA815 OPIA4010 OPIA1210 6 V 0.1 V 7 V Collector Current OPIA817, OPIA814, OPIA1210 OPIA4010 OPIA815 50 mA 150 mA 80 mA Power Dissipation All except the part numbers noted below OPIA4010 150 mW 200 mW

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 4 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010

Electrical Characteristics

SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode VF Forward Voltage All except those noted below OPIA1210 1.0 1.2 1.2 1.4 1.3 V IF = 20 mA IF = 10 mA VFM Peek Forward Voltage OPIA814, OPIA4010 OPIA1210 3.5 3.0 V IFM = 500 mA IR Reverse Current All except those noted below OPIA814 OPIA1210 µA VR = 4 V VR = 5 V Ct Terminal Capacitance All except those noted below OPIA815 250 pf V = 0.0 V, f = 1K Hz V = 0.0 V, f = 1K Hz Output Phototransistor ICEO Collector Dark Current OPIA817, OPIA814 OPIA1210 100 200 nA IF = 0 mA, VCE = 20 V IF = 0 mA, VCE = 300 V VCE(SAT) Collector-Emitter Saturation Voltage OPIA817 OPIA814 OPIA1210 0.1 0.1 0.2 0.3 0.4 V IF = 20 mA, IC = 1 mA IF = 20 mA, IC = 1 mA IF = 8 mA, IC = 2.4 mA fC Cutt-Off Frequency All except those noted below OPIA817, OPIA814, OPIA1210 K Hz VCC = 5 V, IC = 2 mA, RL = 100 Ω tR Rise Time OPIA817 OPIA814 OPIA1210 µs VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω tF Fall Time OPIA817D OPIA814 OPIA1210 µs VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 2 V, IC = 2 mA, RL = 100 Ω VCC = 10 V, IC = 2 mA, RL = 100 Ω Continued on Next Page

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 5 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 Electrical Characteristics - Continued from Previous Page SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Output PhotoDarlington ICEO Collector Dark Current OPIA4010 OPIA815 1.0 1.0 µA IF = 0 mA, VCE = 200 V IF = 0 mA, VCE = 10 V VCE(SAT) Collector-Emitter Saturation Voltage OPIA815 OPIA4010 0.8 1.0 1.5 V IF = 20 mA, IC = 5 mA IF = 20 mA, IC = 5 mA fC Cut-Off frequency OPIA815 OPIA4010 1.0 6.0 7.0 K Hz VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 5 V, IC = 2 mA, RL = 100 Ω tr Rise Time OPIA815 OPIA4010 300 300 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 2 V, IC = 20 mA, RL = 100 Ω tf Fall Time OPIA815 OPIA4010 250 250 µs VCC = 2 V, IC = 20 mA, RL = 100 Ω VCC = 2 V, IC = 20 mA, RL = 100 Ω Coupled Characteristics CTR Current Transfer Ratio OPIA817, OPIA1210 OPIA814 OPIA815 OPIA4010 600 600 600 9,000 I F = 5.00 mA, VCE = 5.0 V IF = 1.00 mA, VCE = 2.0 V IF = 0.05 mA, VCE = 3.3 V IF = 1.00 mA, VCE = 2.0 V Cf Floating Capacitance - 0.6 1. 0 pF V = 0.0 V, f = 1M Hz RISO Isolation Resistance 5X10 10 10 11 - ohm C500V, 40% to 60%RH

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 6 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA817

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 7 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA817

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 8 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA814

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 9 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA814

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 10 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA815

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 11 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA815

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 12 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPI412

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 13 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPI412

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 14 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA1210

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 15 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 OPIA1210

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 16 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 Quality / Reliability Requirements Note: This is to be performed when a change occurs to form, fit or function. Government and Industry Standard Compliance Requirements European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC Parameter Failure Criteria Conditions HTRB D IC(OFF) ± 10% 11 samples after 500Hrs 0 Fail @ VCE = 5.0VDC, Ta = 70°C HTFB D IC(ON) ± 10% 50 samples after 96Hrs

0 Fail @ Max P D, Ta = 25°C

MTTF @ 90% confidence 150, 000 Min. @ 25°C, 25mADC Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020B Lead Solderability 0 Fail per Method 208 of MIL-STD-202. Glass Transition of body 125° C Min. DSC test method Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E High Temperature Storage ± 20% 85°C, 500Hrs Autoclave 0 Fail T A = 121°C, Pressure = 15psi, Humidity = 100%, Time = 96Hrs Label Identification DESCRIPTION: Size: 3” (7.4 cm) X 2.2” (5.5 cm) Lettering shall be black on white background. Format shall be as: Notes: 1. The DATE CODE is a 4-digit code for date of manufacture where YY is the last two digits of the year, and WW is week number of manufacture. 2. The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. Carrollton, TX, USA MADE IN TAIWAN OPTEK P/N __OPIA817D-TU__ IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 3 23-2396 sensors@optekinc.com www.optekinc.com Issue A.5 8/09 Page 17 of 17 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPIA814, OPIA815, OPIA817 OPIA1210, OPIA4010 Packaging Information: Tube Packaging Specifications (TU): Quantity: 4-pin: 100pcs/tube DIMENSIONS ARE IN: INCHES [MILLIMETERS] TOLERANCE: ± 0.008 INCHES [± 0.2 MILLIMETERS]