OPI7002 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE © TT electronics plc Issue C 10/2017 Page 1 TT Electronics | OPTEK Technology
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.ttelectronics.com | www.optekinc.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual -in-line packages. Each OPI7320RCE and OPI7340RCE consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual -in-line packages. The RCE versions reverses the Phototransistor Emitter and Collector pin -out. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: Requiring high voltage isolation between input and output Electrical isolation in dirty environments Industrial equipment Medical equipment Office equipment Features: ± 6 kV dc electrical isolation Inexpensive plastic housing Choice of phototransistor or photodarlington output UL registered File No. E58730
Ordering Information
(,000) CTR Min IF (mA) Typ / Max VCE (Volts) Max Lead Length / Spacing OPI7002 890 nm Transistor 6 10 / 50 30 0.30" / 0.30" OPI7010 100 OPI7320RCE 890 nm or 935 nm Darlington 6 200 5 / 50 15 0.30" / 0.30" OPI7340RCE 400 INCHES [MILLIMETERS]DIMENSIONS ARE IN: RoHS OPI7002, OPI7010 2 3 1 4 OPI7002RCE, OPI7010RCE 2 3 1 4 2 3 1 4 OPI7320RCE, OPI7340RCE Pin # LED Pin # Transistor/ RCE
2 Cathode 3 Collector / Emitter
1 Anode 4 Emitter / Collector
Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE © TT electronics plc Issue C 10/2017 Page 2 TT Electronics | OPTEK Technology www.ttelectronics.com | www.optekinc.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Notes: (1) Measured with input leads and output leads shorted. (2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Derate linearly 1.66 mW/° C above 25° C. (4) UL recognition is for 6kV dc for one minute Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Operating Temperature Range -40° C to +85° C Storage Temperature Range -40° C to +85° C Input-to-Output Isolation Voltage(1)(4) ±6 kVDC Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron(2) 260° C Input Diode Forward DC Current 50 mA Peak Forward current (1 µs pulse width, 300 pps) 3 A Reverse Voltage 2 V Power Dissipation(3) 100 mW Output Phototransistor Collector-Emitter Voltage OPI7002, OPI7010, OPI7002RCE, OPI7010RCE OPI7320RCE, OPI7340RCE 30 V 15 V Emitter-Collector Voltage 5.0 V Power Dissipation(3) 100 mW
Optically Coupled Isolator OPI7002, OPI7002RCE, OPI7010, OPI7010RCE OPI7320RCE, OPI7340RCE © TT electronics plc Issue C 10/2017 Page 3 TT Electronics | OPTEK Technology www.ttelectronics.com | www.optekinc.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode (See OP140 or OP240 for additional information—for reference only) VF Forward Voltage - 1.2 1.70 V IF = 10 mA IR Reverse Current - - 100 µA VR = 2.0 V Output Phototransistor (OPI7002, OPI7010) (See OP550 for additional information—for reference only) Output Photodarlington (OPI7320, OPI7340) (See OP560 for additional information—for reference only) V(BR)CEO Collector-Emitter Breakdown Voltage OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE V IC = 100 µA, IF = 0 V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 µA, IF = 0 ICEO Collector-Emitter Dark Current - - 100 nA VCE = 10 V, IF = 0 Coupled IC/ IF DC Current Transfer Ratio OPI7002, OPI7002RCE OPI7010, OPI7010RCE OPI7320RCE OPI7340RCE 100 200 400 IF = 10 mA, VCE = 5 V IF = 10 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = 5 mA, VCE = 5 V V(SAT) Collector-Emitter Saturation Voltage OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE 0.4 1.0 V IF = 10 mA, IC = 0.50 mA IF = 5 mA, IC = 2 mA VISO Isolation Voltage(1) 6 - - kVDC See note 1 T(ON) Turn-On Time OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE 150 µs VCE = 10 V, IC = 10 mA, RL = 100 Ω T(OFF) Turn-Off Time OPI7002/RCE, OPI7010/RCE OPI7320RCE, OPI7340RCE 125 CIO Capacitance Input-to-Output(1) 0.2 pF VIO = 0, F = 1 MHz Notes: (1) Measured with input leads and output leads shorted.