OPI2000 BOT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

9.25 21.65 +0.2 0 6.65 2.54 1.91 Gnd Vout Vcc 1.91 0.4 0.5 3.0+0.2 EMITTER SENSOR 2.54 1.91 1.9118.05 +0.2 TOP VIEW K An OPI 2000 High Speed Opto Isolator MECHANICAL DATA The OPI 2000 High S peed Optically Coupled Isolator consists of a High Speed Infrared emitter coupled to a silicon photo I.C. The unit is designed for applications requiring high voltage isolation between input & output meeting ATEX requirements.

  • Surface Mount configuration available .
  • 10KV isolation
  • High Speed 2Mb/sec.
  • Low Propagation Delay BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk

29.11.07 ISS C

ALSO AVAILABLE IN THIS SERIES:- OPI2000M ATEX CERTIFIED SURFACE MOUNT OPI2000MK INTEGRAL ELECTROMAGNETIC EARTHED SCREEN OVER SENSOR FOR HIGH COMMON MODE REJECTION Pb This component is RoHS compliant

BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 100mA

5 Volts

150mW (ii) OUTPUT IC MAX SUPPLY VOLTAGE POWER DISSIPATION

7 Volts

OPERATING TEMP -40OC TO +70OC STORAGE TEMP -40OC TO +85OC INPUT-TO-OUTPUT ISOLATION VOLTAGE + 10KV DC (i) LEAD SOLDERING TEMP 2mm from body 5 secs max 260OC i) Measured with the input leads and output leads shorted together for one min. ii) Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of the need to increase the diode current to trigger the device over long periods at high temperatures & currents. OPI 2000 Vgen Rf GND Vout VccR CL R =560 ohm C=0.01uFL CIRCUIT

OPTO ELECTRONIC DATA (TA = 25OC) BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk OPI 2000 OPTO ELECTRONIC SOLUTIONS PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS INPUT DIODE Forward Voltage VF - 1.35 1.6 V If=100mA tp=20mS Reverse Voltage VR 5.0 - - V Ir = 100uA OUTPUT IC ( Vcc=4.75 to 5.25 ) High level Output Current ICH - 100 uA Ic = 10 uA Low Level Output Voltage VOL - 0.6 V IF=10mA IOL=2.6mA High Level Supply Current ICCH 15 mA IF=0 Low Level Supply Current ICCL 18 mA IF=10mA COUPLED(Vcc=5volts) Propagation Delay to Low Output tPLH 800 nSecs RL=560ohms C=0.01uF Propagation Delay to High Output tPHL 800 nSecs ditto