OPI5000_0910 BOT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

E C K A 15.64 2.852.85 2.54 1.1 1.1 20.49 5.255.5 1.0 min wall 6.01.0 min wall OPI 5000 Series Optically Coupled Isolators Surface Mount Low Profile MECHANICAL DATA The OPI 5000 series of Optically Coupled Isolators each consisting of a Infrared emitter coupled to a silicon photo transistor. The series is designed for applications requiring ATEX certification and high voltage isolation between input & output

  • Surface Mount configuration in Tape & Reel
  • 10KV isolation
  • High Current Transfer ratio– 40% min @ 1mA If
  • Low Profile
  • To be designed and manufactured to EN50020 1995 and EN50014 1998
  • True Surface Mount construction BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 27.8.04 THIS IS A DEVELOPME NT DATA SHEET MEANT FOR GUIDANCE ONLY. CERTIFICATION ON THE FINAL PROD- UCT WILL BE APPLIED FOR. Pb This component is RoHS compliant

2.641.32 0.5 18.70 12.20 3.68 15.64 PAD CENTRES BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 100mA

5 Volts

165mW (ii) OUTPUT TRANSISTOR COLLECTOR-EMITTER VOLTAGE COLLECTOR CURRENT POWER DISSIPATION

35 Volts

165mW (iii) OPERATING TEMP -25OC TO +100OC STORAGE TEMP -25OC TO +100OC INPUT-TO-OUTPUT ISOLATION VOLTAGE + 10KV DC (i) i) Measured with the input leads and output leads shorted together for one min. ii) Thermal resistance 375 K/W iii) Thermal resistance 450 K/W Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. Packing Waffle Trays - 100 per tray 290mm x 200mm. Tape & Reel - 400 Devices per 13” Diam Reel with 7” HuB 32mm Wide tape. OPI 5000 27.8.04 RECOMMENDED FOOTPRINT THIS IS A DEVELOPME NT DATA SHEET MEANT FOR GUIDANCE ONLY. CERTIFICATION ON THE FINAL PROD- UCT WILL BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE.

ADVISED SOLDERING CONDITIONS BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk OPI 5000 27.8.04 THIS IS A DEVELOPMENT DA TA SHEET MEANT FOR GUIDANCE ONLY.CERTIFICATION ON THE FINAL PROD- UCT WOULD BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE.

PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDI- TIONS INPUT DIODE Forward Voltage VF - - 1.3 V If = 20mA Reverse Voltage VR 5.0 - - V Ir = 100uA OUTPUT TRANSISTOR Collector-Emitter Breakdown Voltage BVceo 35 - - V Ic = 10 uA Collector-Emitter Leakage Current Iceo - nA Vce = 30 V Emitter-Collector Breakdown BVeco 5.0 - - V Ic = 100uA COUPLED PAIR DC Current Transfer Ratio IC/IF OPI 5000L A - 25 - - % If = 10 mA Vce = 5 V OPI 5000L B - 50 - - % If = 10 mA Vce = 5 V OPI 5000L C - 100 - - % If = 10 mA Vce = 5 V OPI 5000L E - 40 - - % If = 1mA Vce = 5 V Isolation Voltage VISO 10 - - KV - Collector-emitter saturation voltage VCE(SAT) - - 0.4 V If = 10 mA, Ic=1.6mA Turn-on time t on - 8 - uS Ic=2mA Turn-off time t off - 8 - uS Vcc = 5V RL = 100ohm OPTO ELECTRONIC DATA (TA = 25OC) BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk OPI 5000 27.8.04 TAR GET VALUES THIS IS A DEVELOPMENT DATA SHEET MEANT FOR GUIDANCE ONLY.CERTIFICATION ON THE FINAL PROD- UCT WILL BE APPLIED FOR. WE WILL MEET THE LEAD FREE DIRECTIVE.