OPF500 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

© TT electronics plc Issue B 08/2016 Page 1 OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: The OPF500 series receiver contains a monolithic integrated circuit which incorporates a photodiode, linear amplifier, a voltage regulator, and a Schmitt trigger on a single silicon chip. These receivers are designed for short haul fiber optic systems using 850 nm LEDs such as Optek’s OPF300 series. These devices feature TTL/LSTTL compatible logic level output. An internal voltage regulator allows operation with supply voltages ranging from 4.5V to 16V. Applications:  Industrial Ethernet equipment  Copper-to-fiber media conversion  Intra-system fiber optic links Features:  Interfaces with all logic circuits  Two output options  Optimized for fiber optic applications using 50 to 200 micron fibers  Data rate to 200kbps NRZ  Available with multiple packaging options Part Number Description OPF500 Buffer, 10kW Pull-Up Plastic Cap Component OPF505 Buffer, 10kW Pull-Up Metal Can Component OPF507 Buffer, 10kW Pull-Up Metal ST Receptacle Part Ordering Information RoHS This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation.

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF500 Series Issue B 08/2016 Page 2 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Mechanical Outline—OPF500

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF500 Series Issue B 08/2016 Page 3 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Mechanical Outline—OPF505

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF500 Series Issue B 08/2016 Page 4 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Mechanical Outline—OPF507

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF500 Series Issue B 08/2016 Page 5 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature 65° C to +100° C Operating Temperature -40° C to +85° C Lead Soldering Temperature (for 10 seconds) 260° C Supply Voltage 18 V Sinking Current 16 mA Power Dissipation 200 mW Open Collector Power Distribution 40mW Voltage at Output 30 V Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS VCC Supply Voltage 4.5 16.0 V VOH High Level Output Voltage VCC - 1.5 V Buffer: PIN > 2.0 µW Inverter: PIN < 0.1 µW VOL Low Level Output Voltage 0.4 V Buffer: PIN < 0.1 µW Inverter: PIN > 2.0 µW ICC Supply Current 5.0 12.0 mA No output load PIN Input Sensitivity 2.0 µW λp = 850 nm tr Rise Time 300 100 ns Buffer Inverter PIN = 1.5 µW (peak) VCC = 5.0 V tf Fall Time 300 100 ns Buffer Buffer BW Bandwidth 100 kHz PIN > 2.0 µW, 50% duty cycle PWD Pulse Width Distortion ±10 % 1 µW < PIN < 100 µW, f = 20 kHz 50% duty cycle

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF500 Series Issue B 08/2016 Page 6 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance