OPF372 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
© TT electronics plc Issue C 08/2016 Page 1 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. TT Electronics | OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
sensors@ttelectronics.com | www.ttelectronics.com Description: The OPF372 family fiber optic transmitters are high performance devices packaged for data communication links. This transmitter is an 850nm GaAlAs LED and is specifically designed to efficiently launch optical power into fibers ranging in si ze from 50/125µm up to 200/300µm diameter fiber. Multiple power ranges with upper and lower limits are offered which allows the designer to select a device best suited for the application. This product’s combination of features including high speed and efficient coupled power makes it an ideal transmitter for integration into all types of data communications equipment. The mechanical design of this packaged is intended for PC Board or panel mounting. It is shipped with a lock washer, jam nut, 2 #2-56 screws, and a protective dust cap. Applications: Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems Features: Low Cost 850 nm LED technology Popular ST style receptacle Pre-tested with fiber to assure performance Component pre-mounted and ready to use 35MHz operation Typical Coupled Power IF = 100mA, 25°C Fiber Size Type N.A. OPF372A OPF372B OPF372D 50/125 µm Graded Index 0.20 29µW 19µW 7.5µW 62.5/125 µm Graded Index 0.28 89µW 51µW 27µW 100/140 µm Graded Index 0.29 200µW 129µW 60µW 200/300 µm Step Index 0.41 750µW 606µW 320µW RoHS ESD Class 2 ST is a registered trademark of AT&T. All Optek OPF LED emitters are AEL Class I as defined by IEC 60825 -1 and are Risk Group 1 (Low -Risk) as de- fined by IEC 62471.
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF372 Family Issue C 08/2016 Page 2 TT Electronics | OPTEK Technology, Inc. sensors@ttelectronics.com | www.ttelectronics.com Mechanical Data DIMENSIONS ARE IN INCHES (MILLIMETERS)
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF372 Family Issue C 08/2016 Page 3 TT Electronics | OPTEK Technology, Inc. sensors@ttelectronics.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -55° C to +100° C Operating Temperature Range -40° C to +85° C Lead Soldering Temperature(1) 260° C Continuous Forward Current(2) 100 mA Maximum Reverse Voltage 1.0 V Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS POC Total Coupled Power 50/125 mm Fiber, NA = 0.20 OPF372A 25.0 29.0 µW IF = 100 mA OPF372B 15.0 19.0 OPF372D 5.0 7.5 VF Forward Voltage 1.8 2.2 V IF = 100 mA VR Reverse Voltage 1.8 V IR = 100 µA λ Wavelength 830 850 870 nm IF = 50 mA λ Optical Bandwidth 45 60 nm IF = 50 mA tr,tf Rise and Fall Time 6.0 10.0 ns IF = 100 mA; 10% to 90%(3) Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. De-rate linearly at 1.33mA /°C above 25°C . 3. No Pre-bias. 4. All Optek fiber optic LED products are subjected to 100% burn-in as part of its quality control process. The burn-in con- ditions are 96 hours at 100mA drive current and 25°C ambient temperature.
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. OPF372 Family Issue C 08/2016 Page 4 TT Electronics | OPTEK Technology, Inc. sensors@ttelectronics.com | www.ttelectronics.com Performance -40°C 80°C Temperatures are Stepped in 20°C increments. 0 20 40 60 80 100 0.2 1.2 0.4 0.6 0.8 1.0 1.4 Relative Coupled Power vs. Forward Current Forward Current (mA) Relative Coupled Power -40°C 80°C Temperatures are Stepped in 20°C increments. 0 20 40 60 80 100 1.2 1.3 1.8 1.4 1.5 1.6 1.7 2.0 Typical Forward Voltage vs. Forward Current Forward Current (mA) Relative Coupled Power 1.9