DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

The OP980 is a high speed, low-noise and high sensiƟvity PIN silicon photodiode mounted in a miniature SMD package. The device has a flat window lens, which enables a wide acceptance angle at 100°. Due to its clear lens, the OP980 responds to visible and near infrared light. It is packaged in a plasƟc leadless chip carrier that is compaƟble with most automated pick and place mounƟng equipment. The OP980 is mechanically and spectrally matched to the OP280 and OP180 infrared LED. x Non-contact posiƟon sensing x Datum detecƟon x Computer peripherals x Smoke detectors x Touch Sensors x Wide acceptance angle, 100° x Fast response Ɵme x Linear response vs Irradiance x PlasƟc leadless chip carrier (PLCC-2) x Low Capacitance x Top Sensing Area x Tape and reel packaging x Moisture SensiƟvity Level: MSL2 or > Ordering InformaƟon Part Number Sensor Viewing Angle OP980 Photodiode 100° Pin # Transistor

1 Anode

2 Cathode

[MILLIMETERS]DIMENSIONS ARE IN: 1 2 Package Outline Dimensions Recommended Solder PaƩerns xMachine automaƟon xOpƟcal encoders xReflecƟve sensors xCounters and sorters xMiniature opƟcal switches RoHS

Storage Temperature Range -40 o C to +100o C OperaƟng Temperature Range -25 o C to +85o C Lead Soldering Temperature 260° C(1) IL Light Current 0.5 - - μA V R = 5.0 V, EE = 1.0 mW/cm2(3) ID Dark Current - - 60 nA V R = 30.0 V, EE = 0.0 mW/cm2(3) VR(BR) Reverse Breakdown Voltage 60 - - V I R = 10 μA VF Forward Voltage - - 1.2 V I F = 1 mA, Ee = 0.0 mW/cm2 Opk Peak SensiƟvity Wavelength - 890 - nm V R = 5.0 tr Rise Time - 50 - ns V R = 5.0, RL = 1k ƞ Fall Time - 50 - ns V R = 5.0, RL = 1k Notes: 1. Solder Ɵme less than 5 seconds at temperature extreme. 2. Derate linearly at 1.33 mW/° C above 25° C. 3. E e(APT) is an unfiltered GaAlAs LED with peak emission wavelength of 890nm. The measurement of the apertured radiant incidence upon a sensing area 0.081” (2.06mm) in diameter, perpendicular to and centered on the mechanical axis of the lens, and 0.590” (14.99mm) from the measurement surface. Measurement surface will be considered the Ɵp of the top-view lens. Ee(APT) is not necessarily uniform within the measured area. RelaƟve Radiant SensiƟvity—(A/W)-% O—Wavelength—(nm) Electrical CharacterisƟc Performance Curves 0123456789 1 0 Irradiance—Ee—(mW/cm 2) Light Current—I L -(μA) Typical Light Current—I L vs. Irradiance – Ee 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 400 500 600 700 800 900 1000 1100 Spectral Responsivity vs. Wavelength— l

Ambient Temperature—T A—(°C) Dark Current—I D—(nA) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IR @ VR = 5.0V IR @ VR = 10.0V IR @ VR = 20.0V Dark Current—I D vs. Irradiance More Typical Performance Curves Reverse Voltage—V R (V) 1.0E-12 2.0E-12 3.0E-12 4.0E-12 5.0E-12 0 5 10 15 20 Total Capacitance—C T (pF) Total Capacitance—C T (pF) vs. Reverse Bias Voltage—V R (V)

Dimensions are in: mm Tolerance: ±0.01

x Reels come in quanƟty of 2000 units. x Reel diameter is 180mm. Taping and OrientaƟon Tape Feed DirecƟon