OP800 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series © TT electronics plc Issue A 01/2016 Page 1 OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each device in this series consists of a NPN silicon phototransistor mounted in a hermeƟcally sealed TO-18 package that offers high power dissipaƟon and superior hosƟle environment operaƟon. The OP800SL and OP830SL devices have a narrow receiving angle that provides excellent on-axis coupling and a bonded base lead that enables convenƟonal transistor biasing. The OP800WSL, OP801WSL, OP802WSL and OP830WSL all have a wide receiving angle that provides relaƟvely even recepƟon over a large area. Devices are 100% producƟon tested using an infrared light source for close correlaƟon with OPTEK’s GaAs and GaAIAs emiƩers. The OP800SL and devices are mechanically and spectrally matched to OP130 and OP230 series LEDs. The OP800WSL devices are mechanically and spectrally matched to OP130W and OP230W series devices. Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data. Applications:

  • Space-limited applicaƟons
  • HosƟle environment applicaƟons
  • ApplicaƟons requiring high power dissipaƟon Features:
  • TO-18 hermeƟcally sealed package
  • Mechanically and spectrally matched to OP130 and OP230 LEDs
  • TX and TXV process available (see Hi-Rel secƟon)
  • Choice of narrow or wide receiving angle
  • Variety of sensiƟvity ranges
  • Enhanced temperature range “WSL” Part Number Guide — OPXXX OP X X X X X X OPTEK Component 8 —TO-18 Package 3 — Pill-Pack Dome Lens 6 — Pill-Pack Short Lens SL — Tested at 2970° K W S L — T e s t e d a t 2 9 7 0 ° K P o w e r R e fins Part DescripƟon: OP80__SL = TO-18 dome lens, phototransistor 0 through 5 sensi Ɵvity levels tested with 2870° K light source OP80__WSL = Pill-pack flat lens, phototransistor 0 through 2 sensi Ɵvity levels tested with 2870° K light source OP830SL = TO-18 dome lens, photodarlington tested with 2870° K light source OP830WSL = TO-18 flat lens, photodarlington tested with 2870° K light source RoHS

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 2 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com OP800WSL, OP830WSL OP800SL, OP830SL Pin # Transistor

1 Collector

2 Base

3 Emi Ʃer

Pin # Transistor [MILLIMETERS]DIMENSIONS ARE IN: X THIS DIMENSIOIN CONTROLLED AT HOUSING SUR- INCHES [MILLIMETERS]DIMENSIONS ARE IN: X THIS DIMENSIOIN CONTROLLED AT HOUSING SUR- OP800WSLSeries OP800SL Series Trans. NPNBase Collector Emitter

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 3 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65o C to +150o C OperaƟng Temperature Range -65o C to +125o C Collector-Base Voltage (applies to OP800SL only - does not apply to OP800WSL) 30 V Collector-EmiƩer Voltage OP800 (SL, WSL) OP830 (SL, WSL) 30 V 15 V Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C (1) Power DissipaƟon 250 mW(2) ConƟnuous Collector Current 50 mA EmiƩer-Base Voltage (applies to OP800 (SL, WSL) only) 5 V EmiƩer-Collector Voltage (applies to all OP800 and OP830 devices) 5 V Electrical Specifications Notes: 1. RMA flux is recommended. DuraƟon can be extended to 10 seconds maximum when flow soldering. A maximum 20 grams force may be applied to the leads when soldering. 2. Derate linearly 2.5 mW/° C above 25° C. 3. Junc Ɵon temperature maintained at 25° C.

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 4 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IC(ON) (3) On-State Collector Current OP800SL OP801SL OP802SL OP803SL OP804SL OP805SL OP800WSL OP801WSL OP802WSL 0.5 0.5 2.0 4.0 7.0 0.3 0.5 2.5 mA VCE = 5 V, EE = 5 mW/cm2(4 )(5) OP830SL OP830WSL - VCE = 5 V, EE = 0.5 mW/cm2(5) ICEO Collector Dark Current OP800 (SL, WSL) OP830 (SL, WSL) 100 nA V CE = 10 V, EE = 0 V(BR)CEO Collector-EmiƩer Breakdown Voltage OP800 (SL, WSL) OP830 (SL, WSL) V I C = 100 µA V(BR)CBO Collector-Base Breakdown Voltage [applies to OP800SL only] 30 - - V IC = 100 µA V(BR)ECO Emi Ʃer-Collector Breakdown Voltage 5.0 - - V IE = 100 µA V(BR)EBO EmiƩer-Base Breakdown Voltage [applies to OP800SL only] 5.0 - - V IE = 100 µA VCE(SAT) (3) Collector-EmiƩer SaturaƟon Voltage OP800WSL OP800SL OP830SL OP830WSL 0.4 0.4 1.2 1.2 V I C = 0.15 mA, EE = 0.5 mW/cm2(4) IC = 0.4 mA, EE = 5 mW/cm2(5) IC = 0.15 mA, EE = 0.5 mW/cm2(5) IC = 1.0 mA, EE = 0.5 mW/cm2(5) tr Rise Time - 7 - µs tf Fall Time - 7 - µs VCC = 5 V, IC = 0.80 mA, RL = 100 Ω (See Test Circuit)

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 5 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP800SL Series

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 6 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP800WSL Series

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 7 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP830SL Series

© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Phototransistor OP800SL Series, OP800WSL Series OP830SL Series, OP830WSL Series Issue A 08/2016 Page 8 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP830WSL Series