OP600 TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

NPN Silicon Phototransistor OP600 Series © TT electronics plc Issue B 09/2017 Page 1 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each device in this series is a NPN silicon phototransistor in a hermetically sealed pill package. The narrow receiving angle provides excellent on-axis coupling The OP600 series devices are 100% production tested using infrared light for close correlation with OPTEK GaAs and GaAIAs emitters. Components in the OP600 series are mechanically and spectrally matched to the OP123 and OP233 series TX and TXV components are available. For more information, please contact your local representative or OPTEK. Please refer to Application Bulletins 208 and 210 for additional information and reliability (degradation) data, and to Application Bulletin 202 for pill-type soldering to PC Board. Features:  Narrow receiving angle  Variety of sensitivity ranges  Enhanced temperature range  PC Board Mounting  Mechanically and spectrally matched to OP123 and OP223 LEDs  TX and TXV processing available (see Hi-Rel section) DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY RoHS Applications:  Non-contact reflective object sensor  Assembly line automation  Machine automation  Machine safety  End of travel sensor  Door sensor

Ordering Information

IC(ON) (mA) Min / Max Input Power EE (mW/cm2) Viewing Angle OP600A Transistor 1.20 / NA 2.5 35° OP600B 0.60 / 1.80 OP600C 0.30 / NA 20.0 OP643SL 4.00 / 8.00 OP644SL 7.00 / 22.00 Pin # Sensor

1 Collector/Cathode

2 Emitter/Anode

[MILLDIMENSIONS DIMENSIONS ARE IN: [Millimeters] Inches

© TT electronics plc Issue B 09/2017 Page 2 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | sensors@ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. NPN Silicon Phototransistor OP600 Series Absolute Maximum Ratings (TA = 25˚C unless otherwise noted) Collector-Emitter Voltage 25 V Emitter-Collector Voltage 5 V Storage Temperature Range -65° C to +150° C Operating Temperature Range -65° C to +125° C Soldering Temperature (5 seconds with soldering iron) 260° C(1)(2) Power Dissipation 50 mW(3) Continuous Collector Current 50 mA Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS IC(ON) (4) On-State Collector Current OP600A OP600B OP600C OP643SL OP644SL 1.2 0.6 0.3 4.0 7.0 1.8 1.8 1.8 8.0 22.0 VCE = 5 V, EE = 2.5 mW/cm2(5) mA VCE = 5 V, EE = 20 mW/cm2(5) ICEO Collector-Dark Current - - - nA VCE = 10 V, EE = 0 V(BR)CEO Collector-Emitter Breakdown Voltage 25 - - V IC = 100 μA V(BR)ECO Emitter-Collector Breakdown Voltage 5 - - V IE = 100 μA VCE(SAT) (4) Collector-Emitter - - 0.4 V IC = 0.15 mA, EE = 2.5 mW/cm2(5) IC = 0.4 mA, EE = 20 mW/cm2(5) tr Rise Time - 15 - µs Vcc = 5 V, IC = 0.80 mA, RL = 1 kΩ, See Test Circuit tf Fall Time - 15 - µs Vcc = 5 V, IC = 0.80 mA, RL = 1 kΩ, See Test Circuit Notes: (1) Refer to Application Bulleting 202, which discusses proper techniques for soldering pill-type devices to PCBoards. (2) No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. (3) Derate linearly 0.5 mW/° C above 25° C. (4) Junction temperature maintained at 25° C. (5) For OP600A, OP600B and OP600C, light source is a GaAIAs LED, peak wavelength = 890 nm, that provides irradiance of 2.5 mW/cm2. The source irradiance is not necessarily uniform over the entire lens area of the unit being tested. (6) For OP643SL and OP644SL, light source is an unfiltered tungsten bulb operating at CT = 2870 K or equivalent infrared source.