OP215 TTELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
OP215, OP216 © TT electronics plc Issue C 04/2018 Page 1 OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Description: Each OP215 and OP216 device is an 890 nm gallium aluminum arsenide infrared emitting diode (GaAIAs), mounted in a hermetically sealed “pig tale” package with an enhanced temperature range and a narrow irradiance pattern that provides high on-axis intensity for excellent coupling efficiency. These devices offer significantly higher power output than GaAs at equivalent drive currents and have a wavelength that is matched to silicon’s peak response. Their small package size permits high device density mounting. The OP216A device provide an additional mounting tab connected to the Cathode/Case. these LEDs are mechanically and spectrally matched to the OP300 series, OP516, OP600 series and OP640 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data, and t o Application Bulletin 202 for pill-type soldering to PCBoard. Applications: Non-contact reflective object sensor Assembly line automation Machine automation Machine safety End of travel sensor Features: Hermetically sealed package Mechanically and spectrally matched to other OPTEK devices Designed for direct mount to PCBoard Enhanced temperature range OP215 OP216
Ordering Information
cm2 (Min) Total Beam Angle OP215A OP216A 890 mm 1.20 24° Pin # LED
1 Anode
2 Cathode
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue C 04/2018 Page 2 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage Temperature Range -65o C to +150o C Operating Temperature Range -65o C to +125o C Reverse Voltage 2.0 V Continuous Forward Current 100 mA Peak Forward Current (2µs pulse with 0.1% duty cycle) 1.0 A Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 seconds with soldering iron] 260° C(1)(2) Power Dissipation 150 mW(3) Electrical Specifications Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Input Diode EE (APT) (3) Apertured Radiant Incidence OP216A 1.20 - - mW/cm2 IF = 50 mA(4) VF Forward Voltage - - 1.80 V IF = 50 mA IR Reverse Current - - 100 µA VR= 2.0 V λP Wavelength at Peak Emission - 890 - nm IF = 10 mA B Spectral Bandwidth between Half Power Points - 80 - nm IF = 10 mA ∆λ /∆T Spectral Shift with Temperature - +0.18 - nm/°C IF = Constant θHP Emission Angle at Half Power Points - 24 - Degree IF = 50 mA tr Output Rise Time - 500 - ns IF(PK)=100 mA, PW=10 µs, and D.C.=10.0% tf Output Fall Time - 250 - ns Notes: 1. Refer to Application Bulletin 202 which reviews proper soldering techniques for pill-type devices. 2. No clean or low solids. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering. 3. Derate linearly 1.50 mW/° C above 25° C. necessarily uniform within the measured area.
© TT electronics plc General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. Issue C 04/2018 Page 3 OPTEK Technology, Inc. www.optekinc.com | www.ttelectronics.com Performance OP215 & OP216 Forward Voltage vs Forward Current vs Temperature 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) Typical Forward Voltage (V) -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120°C Optical Power vs IF vs Temperature 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 5 10 15 20 25 30 35 40 45 50 Forward Current IF (mA) Normalized Optical Power -60° C -40° C -20° C 0° C 20° C 40° C 60° C 80° C 100° C 120° C Normalized at 50 mA and 20° C Distance vs Output Power vs Forward Current Distance (inches) Normalized Output Power 10 mA 20 mA 30 mA 40 mA 50 mA 60 mA 70 mA 80 mA 90 mA 100 mA Normalized at 1" and 50 mA Forward Current Normalized Intensity vs Beam Angle 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 -45 -35 -25 -15 -5 5 15 25 35 45 Normalized Intensity Angular Displacement (° Degrees) Angular Displacement (˚Degrees) Normalized Intensity