DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
w .moxa.com NPort 5100 Series 1-port RS-232/422/485 serial device servers Features and Benefits
- Small size for easy installation
- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operation modes
- Easy-to-use Windows utility for configuring multiple device servers
- SNMP MIB-II for network management
- Configure by Telnet, web browser, or Windows utility
- Adjustable pull high/low resistor for RS-485 ports Certifications Introduction NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC software direct access to serial devices from anywhere on the network. Most Cost-effective Serial-to-Ethernet Solution Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost-effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort® 5100 Series provides the best choice for serial-to-Ethernet converters. Adjustable Termination and Pull High/Low Resistors In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port. Standard TCP/IP Interface and Broad Choice of Operation Modes The NPort® 5100 device servers can be configured for TCP Server, TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets). Real COM/TTY Drivers for Existing Software The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports. Installation and configuration are painless, and allows your serial devices and PC to communicate seamlessly over a TCP/ IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment while still allowing you to enjoy the benefits of networking your serial devices. Easy to Troubleshoot NPort® 5100 device servers support SNMP, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an email alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password. Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 Magnetic Isolation Protection 1.5 kV (built-in)
w .moxa.com Ethernet Software Features Configuration Options Web Console (HTTP), Serial Console (NPort 5110/5110-T/5150 only), Telnet Console, Windows Utility Management DHCP Client, IPv4, SNTP, SMTP, SNMPv1, Telnet, DNS, HTTP, ARP, BOOTP, UDP, TCP/IP, ICMP Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X Android API Android 3.1.x and later MIB RFC1213, RFC1317 Serial Interface Connector DB9 male No. of Ports 1 Serial Standards NPort 5110/5110-T: RS-232 NPort 5130: RS-422, RS-485 NPort 5150: RS-232, RS-422, RS-485 Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client, TCP Server, UDP Baudrate NPort 5110/5110-T: 110 bps to 230.4 kbps NPort 5130/5150: 50 bps to 921.6 kbps Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd, Space, Mark Flow Control RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF Pull High/Low Resistor for RS-485 NPort 5130/5150: 1 kilo-ohm, 150 kilo-ohms RS-485 Data Direction Control NPort 5130/5150: ADDC® (automatic data direction control) Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND Power Parameters Input Current NPort 5110/5110-T: 128 mA @ 12 VDC NPort 5130/5150: 200 mA @ 12 VDC Input Voltage 12 to 48 VDC No. of Power Inputs 1 Source of Input Power Power input jack
w .moxa.com Physical Characteristics Housing Metal Dimensions (with ears) 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) Dimensions (without ears) 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in) Weight 340 g (0.75 lb) Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting Environmental Limits Operating Temperature Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs Safety UL 60950-1 MTBF Time NPort 5110/5110-T: 3,126,448 hrs NPort 5130: 2,836,863 hrs NPort 5150: 2,736,202 hrs Standards Telcordia (Bellcore) Standard TR/SR Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x NPort 5100 Series device server Power Supply 1 x power adapter, suitable for your region (all models except NPort 5110-T) Documentation 1 x quick installation guide 1 x warranty card
w .moxa.com Dimensions
Ordering Information
Model Name Operating Temp. Baudrate Serial Standards Input Current Input Voltage NPort 5110 0 to 55°C 110 bps to 230.4 kbps RS-232 128.7 mA @ 12 VDC 12-48 VDC NPort 5110-T -40 to 75°C 110 bps to 230.4 kbps RS-232 128.7 mA @ 12 VDC 12-48 VDC NPort 5130 0 to 55°C 50 bps to 921.6 kbps RS-422/485 200 mA @ 12 VDC 12-48 VDC NPort 5150 0 to 55°C 50 bps to 921.6 kbps RS-232/422/485 200 mA @ 12 VDC 12-48 VDC Accessories (sold separately) Cables CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-RJ458P-100 8-pin RJ45 CAT5 Ethernet cable, 1 m CBL-RJ45SF9-150 8-pin RJ45 to DB25 male serial cable with shielding, 1.5m Connectors ADP-RJ458P-DB9F DB9 female to RJ45 connector Mini DB9F-to-TB DB9 female to terminal block connector DIN-Rail Mounting Kits DK35A DIN-rail mounting kit, 35 mm Power Adapters PWR-12150-AU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Australia (AU) plug, -40 to 75°C operating temperature Applicable Models: NPort 5110-T PWR-12150-CN-SA-T Wide-temperature (-40 to 75°C) locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, China (CN) plug Applicable Models:
w .moxa.com NPort 5110-T PWR-12150-EU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Continental Europe (EU) plug, -40 to 75°C operating temperature Applicable Models: NPort 5110-T PWR-12150-UK-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, United Kingdom (UK) plug, -40 to 75°C operating temperature Applicable Models: NPort 5110-T PWR-12150-USJP-SA-T Locking barrel plug, 12 VDC 1.5 A, 100-240 VAC, United States/Japan (US/JP) plug, -40 to 75°C operating temperature Applicable Models: NPort 5110-T PWR-12050-WPUK-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating temperature PWR-12050-WPAU-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Australia (AU) plug, 0 to 40°C operating temperature PWR-12050-WPCN-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating temperature PWR-12050-WPUSJP-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C operating temperature PWR-12050-WPEU-S2 Non-locking barrel plug, 12 VDC, 0.5 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C operating temperature Power Cords CBL-PJ21NOPEN-BK-30 Locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Dec 06, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.