DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

w .moxa.com NPort 5400 Series 4-port RS-232/422/485 serial device servers Features and Benefits

  • User-friendly LCD panel for easy installation
  • Adjustable termination and pull high/low resistors
  • Socket modes: TCP server, TCP client, UDP
  • Configure by Telnet, web browser, or Windows utility
  • SNMP MIB-II for network management
  • 2 kV isolation protection for NPort 5430I/5450I/5450I-T
  • -40 to 75°C operating temperature range (-T model) Certifications Introduction NPort® 5400 device servers provide many useful features for serial-to-Ethernet applications, including an independent operation mode for each serial port, user-friendly LCD panel for easy installation, dual DC power inputs, and adjustable termination and pull high/low resistors. Network Readiness for up to 4 Serial Devices NPort® 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices and distribute management hosts over the network. Independent Operation Mode for Each Serial Port NPort® 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort® 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode. User-friendly LCD Panel for Easy Installation An LCD panel is built into the NPort® 5400’s top panel, with four buttons for data input, configuration, and operation mode selection. The LCD panel displays the server name, serial number, and IP address, and it can be used to enter or modify parameters such as IP address, netmask, and gateway. (The LCD panel is not available on wide-temperature models.) Dual DC Power Inputs NPort® 5400 device servers support dual power sources by providing both a DC terminal block input and a DC power jack input. Providing two types of power inputs gives users greater flexibility for use with different applications. Adjustable Termination and Pull High/Low Resistors The NPort 5400 Series provides adjustable termination and pull high/ low resistors for RS-485 applications. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high/low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values is universally compatible with all environments, the NPort® 5400 has four sets of DIP switches on the bottom panel to set the termination and pull high/low resistor values.

w .moxa.com Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 Magnetic Isolation Protection 1.5 kV (built-in) Ethernet Software Features Configuration Options Telnet Console, Windows Utility, Web Console (HTTP/HTTPS) Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP Filter IGMP v1/v2 Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X Android API Android 3.1.x and later Time Management SNTP Serial Interface Connector NPort 5410/5450/5450-T/5450I/5450I-T: DB9 male NPort 5430/5430I: Terminal block No. of Ports 4 Serial Standards NPort 5410: RS-232 NPort 5430 Series: RS-422, RS-485 NPort 5450 Series: RS-232, RS-422, RS-485 Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client, TCP Server, UDP Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd, Space, Mark Flow Control RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF Isolation 2 kV isolation for NPort 5430I/5450I/5450I-T Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms RS-485 Data Direction Control ADDC® (automatic data direction control) Terminator for RS-485 120 ohms Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND

w .moxa.com RS-485-4w Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND Power Parameters Input Current NPort 5410/5450/5450-T: 350 mA @ 12 VDC NPort 5430: 320 mA @ 12 VDC NPort 5430I: 530 mA @ 12 VDC NPort 5450I/5450I-T: 554 mA @ 12 VDC Input Voltage 12 to 48 VDC No. of Power Inputs 2 Power Connector 1 removable 3-contact terminal block(s) Power input jack Reliability Automatic Reboot Trigger Built-in WDT Alert Tools Built-in buzzer and RTC (real-time clock) Physical Characteristics Housing Metal Dimensions (with ears) 181 x 103 x 33 mm (7.14 x 4.06 x 1.30 in) Dimensions (without ears) 158 x 103 x 33 mm (6.22 x 4.06 x 1.30 in) Weight 740 g (1.63 lb) Interactive Interface LCD panel display (standard temp. models only) Push buttons for configuration (standard temp. models only) Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting Environmental Limits Operating Temperature Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs Maritime DNV-GL (standard temp. models only) Medical EN 60601-1-2 Class B, EN 55011 (NPort 5410/5450/5450I only) Safety UL 60950-1

w .moxa.com MTBF Time NPort 5410: 310,331 hrs NPort 5430/5430I: 265,650 hrs NPort 5450/5450I: 206,903 hrs Standards Telcordia (Bellcore) Standard TR/SR Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x NPort 5400 Series device server Power Supply 1 x power wiring adapters: CBL-PJTB-10 Installation Kit 1 x wall-mounting kit Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Serial Interface Serial Interface Connector Serial Interface Isolation Operating Temp. Input Voltage NPort 5410 RS-232 DB9 male – 0 to 55°C 12 to 48 VDC NPort 5430 RS-422/485 Terminal block – 0 to 55°C 12 to 48 VDC NPort 5430I RS-422/485 Terminal block 2 kV 0 to 55°C 12 to 48 VDC NPort 5450 RS-232/422/485 DB9 male – 0 to 55°C 12 to 48 VDC NPort 5450-T RS-232/422/485 DB9 male – -40 to 75°C 12 to 48 VDC NPort 5450I RS-232/422/485 DB9 male 2 kV 0 to 55°C 12 to 48 VDC NPort 5450I-T RS-232/422/485 DB9 male 2 kV -40 to 75°C 12 to 48 VDC Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m

w .moxa.com CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ458P-100 8-pin RJ45 CAT5 Ethernet cable, 1 m CBL-RJ45SF9-150 8-pin RJ45 to DB25 male serial cable with shielding, 1.5m Connectors ADP-RJ458P-DB9F DB9 female to RJ45 connector Mini DB9F-to-TB DB9 female to terminal block connector DIN-Rail Mounting Kits DK35A DIN-rail mounting kit, 35 mm Power Adapters PWR-12125-WPAU-S1 Non-locking barrel plug, 12 VDC, 1.25 A, 100 to 240 VAC, Australia (AU) plug, 0 to 40°C operating temperature PWR-12125-WPCN-S1 Non-locking barrel plug, 12 VDC, 1.25 A, 100 to 240 VAC, China (CN) plug, 0 to 40°C operating temperature PWR-12125-WPEU-S1 Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, Continental Europe (EU) plug, 0 to 40°C operating temperature PWR-12125-WPUK-S1 Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, United Kingdom (UK) plug, 0 to 40°C operating temperature PWR-12125-USJP-S1 Non-locking barrel plug, 12 VDC, 1.25 A, 100-240 VAC, United States/Japan (US/JP) plug, 0 to 40°C operating temperature PWR-12150-AU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Australia (AU) plug, -40 to 75°C operating temperature Applicable Models: NPort 5450-T NPort 5450I-T PWR-12150-CN-SA-T Wide-temperature (-40 to 75°C) locking barrel plug, 12 VDC, 1.5 A, 100 to 240 VAC, China (CN) plug Applicable Models: NPort 5450-T NPort 5450I-T PWR-12150-EU-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, Continental Europe (EU) plug, -40 to 75°C operating temperature Applicable Models: NPort 5450-T NPort 5450I-T PWR-12150-UK-SA-T Locking barrel plug, 12 VDC, 1.5 A, 100-240 VAC, United Kingdom (UK) plug, -40 to 75°C operating temperature Applicable Models: NPort 5450-T NPort 5450I-T PWR-12150-USJP-SA-T Locking barrel plug, 12 VDC 1.5 A, 100-240 VAC, United States/Japan (US/JP) plug, -40 to 75°C operating temperature Applicable Models: NPort 5450-T NPort 5450I-T Power Wiring CBL-PJTB-10 Non-locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Nov 22, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.