N242 IVO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
Memory controller for manual and automatic format – alignment Display: LCD backlit, two lines alphanumeric, – multilingual Programming and memory unit – Memory for 100 formats with 32 positions each – Interface RS485 – Technical data - electrical ratings Voltage supply 85...265 VAC (50/60 Hz) Current consumption ≤1000 mA Power consumption 30 VA Reverse polarity protection No Sensor supply 24 VDC ±10 % / <1 A Display LCD-TFT, 2-lines, backlit, alphanumeric Function User menu, multilingual Motive positioning Memory unit for 100 format profiles Programming of max. 32 SPA SPA zero point alignment Start position for target display N 155 Keylock Secured by code Control inputs Shaft release Start positioning control outputs relay Shafts in position Start positioning Switching capacity relay 100 VA / 30 W Switching current relay 1 A Switching voltage relay 265 VAC Data memory >10 years in EEPROM Interface RS485 (ASCII protocol) Programmable parameters Language selection Standard DIN EN 61010-1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 Approval UL/cUL N 242 Technical data - mechanical design Operating temperature -10...+50 °C Storing temperature -20...+70 °C Relative humidity 80 % non-condensing Protection DIN EN 60529 IP 65 face with seal E-connection Screw terminal connector Core cross-section 1.5 mm² Operation / keypad 10 figure keypad with 8 function keys Housing type Housing for control panel installation Dimensions W x H x L 144 x 144 x 116.5 mm Cutout dimensions 125 x 125 mm Installation depth 120 mm Mounting Front panel installation by clip frame Weight approx. 600 g Material Polycarbonate black, UL 94V-0 Manual and automatic format alignment Display LCD two lines, interface RS485
www.baumerivo.com www.baumerivo.com Memory Controllers www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.30/10/2008 N 242 Part number N 242. 1 1 2 AX01 Voltage supply 2 85...265 VAC Outputs
1 With output
1 RS485
Manual and automatic format alignment Display LCD two lines, interface RS485 22 21 20 19 18 17 +24V Tx,Rx+ Tx,Rx- Release shaft Start position Kx2 6543 21Supply voltage 85-265 VAC 50/60 Hz release positioning Shaft in position Kx1 Kx Lx Stop Start Connection diagram Dimensions 144 144 120 116.5 2-420 16.5 124 124 N 242 memory controller intended for front panel instal- lation serves as memory and operating unit. By RS485 network up to 100 format profiles with several position values for maximum 32 spindles can be saved and recalled for retransmission to the SPAs (spindle position displays) respectively actuators (multiconDrive) upon pressing a but- ton. The two-line SPA display indicates both actual value and target. Similar to the SPA display, the controller is giving information whether the spindles are “in position” or “not in position”. The keypad provides 10 figures and 8 function keys allow- ing easy parameter input and recall. multiconDrive provides an external start key for centralized release of positioning cycles. Programmable parameters enable perfect adapta- tion to the application. Programmable parameters and functions: – tolerance window, end position switch-off – collective groups of 5 spindles each – teach-in of target values – spindle pitch and compensation – measuring unit mm/inch – multilingual