N155 IVO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Target display for manual format aligning – Display: LCD backlit, two lines – One key permanently assigned as target – Interface RS485 – Technical data - electrical ratings Voltage supply 24 VDC ±10 % Current consumption ≤30 mA Display LCD, 7-segment display, 2-lines, backlit Display range -9999...+99999 Interface RS485 (ASCII protocol) Data memory >10 years in EEPROM Programmable parameters Measuring unit mm/inch Direction arrows Decimal point Standard DIN EN 61010-1 Overvoltage category II Protection class II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Approval UL/cUL N 155 Technical data - mechanical design Protection DIN EN 60529 IP 65 Operating temperature -10...+50 °C Storing temperature -20...+70 °C Relative humidity 80 % non-condensing E-connection - Male/female connector M8, 4-pin - Cable output (30/15 cm) with male/female connector M8, 4-pin - Cable output (30/15 cm) with male/female connector M16, 5-pin Operation / keypad Membrane with one softkey (handshake) Housing type Surface mount housing with mounting plate Dimensions W x H x L 37 x 75 x 29 mm Mounting Mount onto plate Weight approx. 60 g Material Polyamide black, UL 94V-0 Plug-on mount, enter key, manual format alignment Display LCD two lines, interface RS485
www.baumerivo.com www.baumerivo.com Target Displays www.baumerivo.com 2 Subject to modification in technic and design. Errors and omissions excepted.30/10/2008 N 155 Part number N 155. 1 3 B X01 Display B Horizontal at front Voltage supply 3 24 VDC E-connection
0 Connector output M8 with male and
1 Bottom cable output M8
2 Rear cable output M8
3 Bottom cable output M16
1 RS485
Plug-on mount, enter key, manual format alignment Display LCD two lines, interface RS485 Accessories Connectors and cables (page %S) Z 178.A01 Adaptor cable between cable connector M8 and female M16, 1 m Z 178.AW1 Cable connector M8, 4-pin, less cable with integrated terminating resistor 120 Ω Z 178.B01 Mating connector M8, 4-pin, less cable Z 178.D05 Data and supply cable M8, Master to N 150 and N 155, 5 m Z 178.S01 Cable connector M8, 4-pin, less cable Z 178.V01 Coupling cable 1 m between M8 and M8 The multicon spindle positioning system is completed by a target display indicating also positions of hand wheels, limits, linear units etc in close vicinity of the actuator. The backlit LCD display provides the editing engineer with the target parameters. The handshake key is saving the edited parameters. Serial interface RS485 enables network of maximum 32 target and spindle position displays with PC or PLC. For complete solutions also memory controllers as decen- tralized operating and memory terminals are available.
Description
www.baumerivo.com Target Displays N 155 Plug-on mount, enter key, manual format alignment Display LCD two lines, interface RS485 M8 connector M16 connector Assignment Pin 1 Pin 5 Tx/Rx-, RS485 Pin 2 Pin 4 Tx/Rx+, RS485 Pin 3 Pin 1 Sensor supply +24 V Pin 4 Pin 2 Sensor supply 0 V 4 3 M8 connector M8 female connector M16 connector M16 female connector Terminal assignment
www.baumerivo.com www.baumerivo.com Target Displays www.baumerivo.com 4 Subject to modification in technic and design. Errors and omissions excepted.30/10/2008 N 155 Plug-on mount, enter key, manual format alignment Display LCD two lines, interface RS485 Dimensions 300
150 Female
Bottom cable output, M8 and M16 7516 37 29 36.5 ±0.18 4.3 12.5 1136.5 ±0.115 19R PG gland with connector PG gland with female connector Cutout for rear cable output Female connector Connector Connector male and female Cable output rear, M8