MTGEZW-00-0000-0B0PE030F

MT-G CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp ® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE .Com/XLAmp CLD-DS36 Rev 9D Cree® XLamp® MT -G EasyWhite® LEDs ProDuCT DEsCriPTion The XLamp ® MT-G easyWhite ® LeD maximizes lumen density, eliminates chromaticity binning and enables luminaire and bulb manufacturers to deliver consistent color and high‑efficacy light output in a new, compact, multi-die package. XLamp MT-G easyWhite LeDs can reduce LeD-to-LeD color variation to within a 2-step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 color region. The XLamp MT-G easyWhite LeD is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. example applications include: LeD retrofit bulbs, commercial/retail display spotlights, and other indoor general illumination applications.

FEATurEs

• Cree easyWhite color temperatures from 2700 K to 5000 K CCT
• Wide range of operating power - up to 25 W
• 85 °C binning and characterization
• Two voltage options: 6 V, 36 V
• Low effective thermal resistance: 1.5 °C/W
• High lumen density
• Wide viewing angle: 120°
• 80‑minimum CRI at 2700 K and

3000 K CCT

• 85‑ and 90‑minimum CRI available in

2700 K and 3000 K CCT

• electrically neutral thermal path
• RoHS and ReACh compliant
• UL ® recognized component (e349212)

APPLiCATions

• MR, PAR and other directional retrofit bulbs
• Commercial/residential directional lighting
• General illumination TAbLE oF ConTEnTs Flux Characteristics, easyWhite® Order Flux Characteristics, easyWhite® Order Relative Spectral Power Distribution .... 7 Relative Luminous Flux vs. Junction Performance Groups – Chromaticity ..11 Cree easyWhite® Color Temperatures

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED ChArACTErisTiCs Characteristics unit Minimum Typical Maximum viewing angle (FWHM) degrees 120 eSD withstand voltage (HBM per Mil-Std-883D) v 8000 effective thermal resistance, junction to solder point °C/W 1.5 LeD junction temperature °C 150 DC forward current (6 V) mA 1100 4000 DC forward current (36 V) mA 185 700 Forward voltage (6 V, 1100 mA, 85 °C) v 5.6 6.7 Forward voltage (36 V, 185 mA, 85 °C) v 33.5 40.2 Temperature coefficient of voltage (6 V) mV/°C ‑4.5 Temperature coefficient of voltage (36 V) mV/°C -27 Reverse voltage (6 V) v ‑5 Reverse current (6V, 36 V) mA 0.1

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14).
• Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
• Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
• Minimum CRI for Standard color temperature 50F, 50H is 75.
• Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
• Minimum CRI for 85 CRI Minimum is 85.
• Minimum CRI for 90 CRI Minimum is 90. * Flux values @ 25 °C are calculated and for reference only. FLuX ChArACTErisTiCs, EAsyWhi TE® Order CO des and Bins - 6 V ( iF = 1100 mA, Tj = 85 °C) The following tables provide order codes for 6-volt XLamp MT-G easyWhite LeDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT range Minimum Luminous Flux @ 1100 ma 2-step 4-step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Chromaticity region order Code Chromaticity region order Code Standard CRI 5000 K H0 560 642 50H MTGEZW‑00‑0000‑0B00H050H 50F MTGEZW‑00‑0000‑0B00H050F J0 600 688 MTGEZW‑00‑0000‑0B00J050H MTGEZW‑00‑0000‑0B00J050F K0 650 745 MTGEZW‑00‑0000‑0B00K050H MTGEZW‑00‑0000‑0B00K050F 4000 K F0 480 550 40H MTGeZW-00-0000-0B00F040H 40F MTGeZW-00-0000-0B00F040F G0 520 596 MTGeZW-00-0000-0B00G040H MTGeZW-00-0000-0B00G040F H0 560 642 MTGeZW-00-0000-0B00H040H MTGeZW-00-0000-0B00H040F J0 600 688 MTGeZW-00-0000-0B00J040H MTGeZW-00-0000-0B00J040F 3500 K e0 440 504 35H MTGEZW‑00‑0000‑0B00E035H 35F MTGEZW‑00‑0000‑0B00E035F F0 480 550 MTGEZW‑00‑0000‑0B00F035H MTGEZW‑00‑0000‑0B00F035F G0 520 596 MTGEZW‑00‑0000‑0B00G035H MTGEZW‑00‑0000‑0B00G035F H0 560 642 MTGEZW‑00‑0000‑0B00H035H MTGEZW‑00‑0000‑0B00H035F 3000 K e0 440 504 30H MTGeZW-00-0000-0B00e030H 30F MTGeZW-00-0000-0B00e030F F0 480 550 MTGeZW-00-0000-0B00F030H MTGeZW-00-0000-0B00F030F G0 520 596 MTGeZW-00-0000-0B00G030H MTGeZW-00-0000-0B00G030F H0 560 642 MTGeZW-00-0000-0B00H030H MTGeZW-00-0000-0B00H030F 2700 K D0 400 458 27H MTGeZW-00-0000-0B00D027H 27F MTGeZW-00-0000-0B00D027F e0 440 504 MTGeZW-00-0000-0B00e027H MTGeZW-00-0000-0B00e027F F0 480 550 MTGeZW-00-0000-0B00F027H MTGeZW-00-0000-0B00F027F G0 520 596 MTGeZW-00-0000-0B00G027H MTGeZW-00-0000-0B00G027F

85 CRI

e0 440 504 MTGeZW-00-0000-0B0Pe030H MTGeZW-00-0000-0B0Pe030F F0 480 550 MTGeZW-00-0000-0B0PF030H MTGeZW-00-0000-0B0PF030F 2700 K D0 400 458 27H MTGeZW-00-0000-0B0PD027H 27F MTGeZW-00-0000-0B0PD027F e0 440 504 MTGeZW-00-0000-0B0Pe027H MTGeZW-00-0000-0B0Pe027F

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14).
• Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
• Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
• Minimum CRI for Standard color temperature 50F, 50H is 75.
• Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
• Minimum CRI for 85 CRI Minimum is 85.
• Minimum CRI for 90 CRI Minimum is 90. * Flux values @ 25 °C are calculated and for reference only. Color CCT range Minimum Luminous Flux @ 1100 ma 2-step 4-step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Chromaticity region order Code Chromaticity region order Code

90 CRI

D0 400 458 MTGeZW-00-0000-0B0UD030H MTGeZW-00-0000-0B0UD030F e0 440 504 MTGeZW-00-0000-0B0Ue030H MTGeZW-00-0000-0B0Ue030F 2700 K B0 340 390 27H MTGeZW-00-0000-0B0UB027H 27F MTGeZW-00-0000-0B0UB027F C0 370 424 MTGeZW-00-0000-0B0UC027H MTGeZW-00-0000-0B0UC027F D0 400 458 MTGeZW-00-0000-0B0UD027H MTGeZW-00-0000-0B0UD027F FLuX ChArACTErisTiCs, EAsyWhi TE® Order CO des and Bins - 6 V ( iF = 1100 mA, Tj = 85 °C) - COntinued

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14).
• Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
• Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
• Minimum CRI for Standard color temperature 50F, 50H is 75.
• Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
• Minimum CRI for 85 CRI Minimum is 85.
• Minimum CRI for 90 CRI Minimum is 90. * Flux values @ 25 °C are calculated and for reference only. FLuX ChArACTErisTiCs, EAsyWhi TE® Order CO des and Bins - 36 V ( iF = 185 mA, Tj = 85 °C) The following table provide order codes for 36-volt XLamp MT-G easyWhite LeDs. For a complete description of the order code nomenclature, please reference page 12 of this document. Color CCT range Minimum Luminous Flux @ 185 ma 2-step 4-step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Chromaticity region order Code Chromaticity region order Code Standard CRI 5000 K H0 560 642 50H MTGEZW‑00‑0000‑0N00H050H 50F MTGEZW‑00‑0000‑0N00H050F J0 600 688 MTGEZW‑00‑0000‑0N00J050H MTGEZW‑00‑0000‑0N00J050F K0 650 745 MTGEZW‑00‑0000‑0N00K050H MTGEZW‑00‑0000‑0N00K050F 4000 K F0 480 550 40H MTGeZW-00-0000-0N00F040H 40F MTGeZW-00-0000-0N00F040F G0 520 596 MTGeZW-00-0000-0N00G040H MTGeZW-00-0000-0N00G040F H0 560 642 MTGeZW-00-0000-0N00H040H MTGeZW-00-0000-0N00H040F J0 600 688 MTGeZW-00-0000-0N00J040H MTGeZW-00-0000-0N00J040F 3500 K e0 440 504 35H MTGEZW‑00‑0000‑0N00E035H 35F MTGEZW‑00‑0000‑0N00E035F F0 480 550 MTGEZW‑00‑0000‑0N00F035H MTGEZW‑00‑0000‑0N00F035F G0 520 596 MTGEZW‑00‑0000‑0N00G035H MTGEZW‑00‑0000‑0N00G035F H0 560 642 MTGEZW‑00‑0000‑0N00H035H MTGEZW‑00‑0000‑0N00H035F 3000 K e0 440 504 30H MTGeZW-00-0000-0N00e030H 30F MTGeZW-00-0000-0N00e030F F0 480 550 MTGeZW-00-0000-0N00F030H MTGeZW-00-0000-0N00F030F G0 520 596 MTGeZW-00-0000-0N00G030H MTGeZW-00-0000-0N00G030F H0 560 642 MTGeZW-00-0000-0N00H030H MTGeZW-00-0000-0N00H030F 2700 K D0 400 458 27H MTGeZW-00-0000-0N00D027H 27F MTGeZW-00-0000-0N00D027F e0 440 504 MTGeZW-00-0000-0N00e027H MTGeZW-00-0000-0N00e027F F0 480 550 MTGeZW-00-0000-0N00F027H MTGeZW-00-0000-0N00F027F G0 520 596 MTGeZW-00-0000-0N00G027H MTGeZW-00-0000-0N00G027F

e0 440 504 MTGeZW-00-0000-0B0Pe030H MTGeZW-00-0000-0B0Pe030F F0 480 550 MTGeZW-00-0000-0B0PF030H MTGeZW-00-0000-0B0PF030F 2700 K D0 400 458 27H MTGeZW-00-0000-0B0PD027H 27F MTGeZW-00-0000-0B0PD027F e0 440 504 MTGeZW-00-0000-0B0Pe027H MTGeZW-00-0000-0B0Pe027F

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 14).
• Minimum CRI for Standard color temperatures 27F, 27H, 30F, 30H is 80.
• Minimum CRI for Standard color temperatures 35F, 35H, 40F, 40H is 77.
• Minimum CRI for Standard color temperature 50F, 50H is 75.
• Typical CRI for Standard color temperatures 35F, 35H, 40F, 40H is 80.
• Minimum CRI for 85 CRI Minimum is 85.
• Minimum CRI for 90 CRI Minimum is 90. * Flux values @ 25 °C are calculated and for reference only. FLuX ChArACTErisTiCs, EAsyWhi TE® Order CO des and Bins - 36 V ( iF = 185 mA, Tj = 85 °C) - COntinued Color CCT range Minimum Luminous Flux @ 185 ma 2-step 4-step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Chromaticity region order Code Chromaticity region order Code

D0 400 458 MTGeZW-00-0000-0B0UD030H MTGeZW-00-0000-0B0UD030F e0 440 504 MTGeZW-00-0000-0B0Ue030H MTGeZW-00-0000-0B0Ue030F 2700 K B0 340 390 27H MTGeZW-00-0000-0B0UB027H 27F MTGeZW-00-0000-0B0UB027F C0 370 424 MTGeZW-00-0000-0B0UC027H MTGeZW-00-0000-0B0UC027F D0 400 458 MTGeZW-00-0000-0B0UD027H MTGeZW-00-0000-0B0UD027F

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED relatiVe speC tral pOwer distriButiOn (6 V , 1100 ma; 36 V, 185 mA; TJ= 85 °C) The following graph represents typical spectral output of the XLamp MT-G easyWhite LeD. relatiVe luminOus Flux Vs. JunC tiOn temperature (6 V , 1100 ma; 36 V, 185 ma) The following graph represents typical performance of the XLamp MT-G easyWhite LeD. Relative Spectral Power Distribution White - the only roboto graph The following graph represents typical spectral output of each die of the MT-G 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 Relative Spectral Power Wavelength (nm) Cool White Warm White Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V) The following graph represents typical performance of each LED die in the XLamp MT-G 20% 40% 60% 80% 100% 120% 20 40 60 80 100 120 140 Relative Luminous Flux Junction Temperature (ºC)

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED eleC triCal Chara CteristiCs ( tJ = 85 °C) Electrical Characteristics (Tsp = 85ºC) 6V 500 1000 1500 2000 2500 3000 3500 4000 5 5.25 5.5 5.75 6 6.25 Current (mA) Forward Voltage( V) 6 V 36V 100 200 300 400 500 600 700 31 32 33 34 35 36 37 38 Current (mA) Forward Voltage( V) 36 V

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED relatiVe luminOus Flux Vs. Current ( tJ = 85 °C) Relative Intensity vs. Current (Tsp = 85ºC) 50% 100% 150% 200% 250% 300% 0 500 1000 1500 2000 2500 3000 3500 4000 Relative Luminous Flux Forward Current, Pulsed (mA) 6 V 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 Relative Luminous Flux Forward Current, Pulsed (mA) 36 V

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED TyPiCAL sPATiAL DisTribuTion The following graph represents typical performance of the XLamp MT-G easyWhite LeD. perFO rmanCe GrO ups – BriGhtness ( tJ = 85 °C) XLamp MT-G easyWhite LeDs are tested for luminosity and placed into one of the following bins. Group Code min. luminous Flux @ 1100 ma, 6 V; @185 ma, 36 V max. luminous Flux @ 1100 ma, 6 V; @185 ma, 36 V A0 310 340 B0 340 370 C0 370 400 D0 400 440 e0 440 480 F0 480 520 G0 520 560 H0 560 600 J0 600 650 K0 650 700 Spatial Distribution 20% 40% 60% 80% 100% -90 -60 -30 0 30 60 90 Relative Luminous Intensity Angle (º)

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED perFO rmanCe GrO ups – ChrO matiCity ( tJ = 85 °C) XLamp MT‑G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite® Color Temperatures – 4-step Code CCT x y 50F 5000 K 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 40F 4000 K 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35F 3500 K 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30F 3000 K 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27F 2700 K 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 EasyWhite® Color Temperatures – 4-step Code CCT x y 50H 5000 K 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 40H 4000 K 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35H 3500 K 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30H 3000 K 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27H 2700 K 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED CrEE EAsyWhi TE® COlOr temperatures plOtted On the 1931 Cie CurVe (tJ = 85 °C) bin AnD orDEr CoDE ForMAT s Bin codes and order codes are configured as follows: order Code bin Code 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 5700 K 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step SSSCCC-BB-HHHH-NNNRNNNNN Series MTG = MT-G Internal code CRI Specification U = 90 CRI minimum P = 85 CRI minimum 0 = Standard CRI Kit code Vf class B0 = 6-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (nonstandard) Color EZW = EasyWhite SSSCCC-BB-WWW-FF-NNRAAAA Series MTG = MT-G Internal code Flux bin CRI Specification U = 90 CRI minimum P = 85 CRI minimum H = Standard minimum Internal Code Vf class B0 = 6-V class N0 = 36-V class Chromaticity bin Color EZW = EasyWhite

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED rEFLoW soLDErinG ChArACTErisTiCs In testing, Cree has found XLamp MT-G easyWhite LeDs to be compatible with JeDeC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65‑150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45‑90 seconds Peak/Classification Temperature (Tp) 235 ‑ 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 ‑ 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. IPC/JEDEC J‑STD‑020C TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED noTEs Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. pre-release Qualification testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long‑term reliability for XLamp LEDs and details of Cree’s pre‑release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance. For information on the specific LM‑80 data sets available for this LED, refer to the public LM-80 results document. Moisture sensitivity Cree recommends keeping XLamp LeDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MT‑G EasyWhite LEDs may be stored as MSL 1 per JEDEC J‑STD‑033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP . rohs Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. rEACh Compliance ReACh substances of very high concern (SvHCs) information is available for this product. Since the european Chemical Agency (eCHA) has published notice of their intent to frequently revise the SvHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date ReACh SvHC Declaration. ReACh banned substance information (ReACh Article 67) is also available upon request. uL® recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750.

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED Vision advisory WARNING. Do not look at exposed LeD lamps in operation. eye injury can result. For more information about LeDs and eye safety, please refer to the LeD eye Safety application note.

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED MECh AniCAL DiMEnsions All measurements are ±.25 mm unless otherwise indicated. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 9.113 9.113 .650 4.85 ±.25 R4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950.950 .500.500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1/19.000 C2610-00011 TIGER 9191 OUTLINE 10/8/10D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A INITIAL RELEASE DC 10/8/10 B CHANGED SOLDER PAD VIEW DC 1/11/11 C ADDED STENCIL VIEW DC 2/18/11 RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 9.113 9.113 .650 4.85 ±.25 R4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950.950 .500.500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1/19.000 C2610-00011 TIGER 9191 OUTLINE 10/8/10D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A INITIAL RELEASE DC 10/8/10 B CHANGED SOLDER PAD VIEW DC 1/11/11 C ADDED STENCIL VIEW DC 2/18/11 RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 8.900 8.900 6.000 .950.950 .500.500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 8.90 8.90 4.85 ±.25 R4.100 .650 8.90 8.90 .950 .500 6.000 1/19.000 A2610-00016 36V MT-G OUTLINE 10/8/10D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A INITIAL RELEASE DC 6/16/11 RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN mt-G 6 V mt-G 36 V SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 8.90 8.90 .650 4.85 ±.25 R4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950.950 .500.500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1/19.000 D2610-00011 TIGER 9191 OUTLINE 10/8/10D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A INITIAL RELEASE DC 10/8/10 B CHANGED SOLDER PAD VIEW DC 1/11/11 C ADDED STENCIL VIEW DC 2/18/11 D CHANGED OVERALL DIM TO MATCH CUT LENGTH AND WIDTH DC 3/25/11 RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN ANODe ANODe SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 8.90 8.90 .650 4.85 ±.25 R4.100 8.90 .950 .500 6.000 8.90 8.900 8.900 6.000 .950.950 .500.500 6.198 .889 1.090 1.905 1.072 1.905 8.839 .889 .937 .937 1.722 3.175 3.175 1.090 8.072 1/19.000 D2610-00011 TIGER 9191 OUTLINE 10/8/10D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A INITIAL RELEASE DC 10/8/10 B CHANGED SOLDER PAD VIEW DC 1/11/11 C ADDED STENCIL VIEW DC 2/18/11 D CHANGED OVERALL DIM TO MATCH CUT LENGTH AND WIDTH DC 3/25/11 RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED TAPE AnD rEEL All Cree carrier tapes conform to eIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION X° ± .5 ° .XXX ± .010 .XX ± .03 .X ± .06 FOR SHEET METAL PARTS ONLY .XX ± .01 .XXX ± .005 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTANED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE SURFACE FINISH: 63 330 +.25 -.75 12.4 +1.0 -.5 MEASURED AT EDGE 16.4 +0.2 MEASURED AT HUB 12.4 +.2 MEASURED AT HUB ±.213.1 1.9±.4 ±.421 60° 60° 1/10.500 A2400-00009 REEL, 13" X 12MM, 3 PIECE SNAP ANTI-STATIC HIPS ---- ---- 09/29/09D. CRONIN 2400-00009 INDEX QTY ITEM COMMENTS 1 1 2400-00009-CORE 2 2 2400-00009-REEL REVISONS REV DESCRIPTION BY DATE APP'D SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 Trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) Loaded Pockets (500 Lamps) 12±.1 5.25 +.3 -.0 1.75 ±.10 4±.10 Leader 400mm (min) of empty pockets sealed with tape (35 pockets min.) 9.4 1/13.000 B2402-00016 MTG LOADING SPEC ---- ---- 1/28/11D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A Initial Release DC 1/28/11 B Added missing sprocket holes DDS 10/17/11 END START User Feed Direction CATHODE SIDE ANODE SIDE 1.5± .1 SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION X° ± .5 ° .XXX ± .010 .XX ± .03 .X ± .06 FOR SHEET METAL PARTS ONLY .XX ± .01 .XXX ± .005 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTANED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE SURFACE FINISH: 63 330 +.25 -.75 12.4 +1.0 -.5 MEASURED AT EDGE 16.4 +0.2 MEASURED AT HUB 12.4 +.2 MEASURED AT HUB ±.213.1 1.9±.4 ±.421 60° 60° 1/10.500 A2400-00009 REEL, 13" X 12MM, 3 PIECE SNAP ANTI-STATIC HIPS ---- ---- 09/29/09D. CRONIN 2400-00009 INDEX QTY ITEM COMMENTS 1 1 2400-00009-CORE 2 2 2400-00009-REEL REVISONS REV DESCRIPTION BY DATE APP'D

Copyright © 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® mT-G EasyWhiTE ® LED PACkAGinG Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Dessicant (inside bag) Humidity Indicator Card (inside bag) Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Code, Quantity, Reel ID Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Unpackaged Reel Packaged Reel Boxed Reel