MSN23P09S BWTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • -20V,-5.8A, RDS(ON) =33mΩ@VGS = -4.5V
  • Improved dv/dt capability
  • Green Device Available
  • 100% EAS Guaranteed
  • Fast Switching
  • RoHS compliant package Application
  • Notebook
  • Load Switch
  • Battery Protection
  • Hand-held Instruments SOT23-3S Pin Configuration Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (Tc=25°C unless otherwise specified) Symbol Parameter Value Unit VDS Drain to Source Voltage -20 V VGS Gate to Source Voltage ±10 V ID Continuous Drain Current (TC=25°C) Continuous Drain Current (TC=100°C) -5.8 -3.7 A IDM Drain Current Pulsed1 -23.2 A

Publication Order Number: [ MS69P05] © Bruckewell Technology Corporation Rev. A -2016 Absolute Maximum Ratings (Tc=25°C unless otherwise specified) Symbol Parameter Value Unit PD Power Dissipation (TC = 25°C) Power Dissipation – Derate above 25°C 1.56 W

0.012 W/°C

TSTG Storage Temperature Range -55 to +150 °C TJ Operating Junction Temperature Range -55 to +150 °C Thermal Characteristics Symbol Parameter Value Units Min. Typ. Max. RθJA Thermal Resistance,Junction-to-Ambient -- -- 80 °C/W Electrical Characteristics (TJ=25°C, unless otherwise noted) Off Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units BVDSS Drain-Source Breakdown Voltage VGS =0 V , ID = 250μA -60 -- -- V △BVDSS /△TJ BVDSS Temperature Coefficient ID = -1mA, Referenced to 25°C -- -0.05 -- V/°C IDSS Drain-Source Leakage Current VDS = -20 V , TJ= 25°C VDS = -16 V , TJ= 125°C -- -- -1 -10 uA IGSS Gate-Source Leakage,Forward VGS = ±10 V , VDS = 0 V -- -- ±100 nA On Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 uA -0.3 -0.6 -1 V RDS(ON) Static Drain-Source On-state Resis-tance VGS = -4.5 V , ID = -4 A VGS = -2.5 V , ID = -3 A VGS = -1.8 V , ID = -2 A mΩ △VGS(th) Gate Threshold Voltage VGS = VGS, ID = 250 uA 2 mV/°C gfs Forward Transconductance VDS = -10V , IS = -3 A 8.4 S Dynamic Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units Qg Total Gate Charge2,3 VDS = -10 V, VGS = -4.5 V, ID = -4 A -- 16.1 25 nC Qgs Gate-Source Charge2,3 -- 1.8 3 nC Qgd Gate-Drain Charge2,3 -- 3.8 7 nC CISS Input Capacitance VGS = 0 V, VDS = -15 V, f = 1MHz -- 1440 2100 pF COSS Output Capacitance -- 155 230 pF CRSS Reverse Transfer Capacitance -- 115 170 pF

Publication Order Number: [ MS69P05] © Bruckewell Technology Corporation Rev. A -2016 Drain-Source Diode Characteristics and Maximum Ratings Symbol Parameter Test Conditions Min Typ. Max. Units IS Continuous Source Current VD=VG=0V Force Current -- -- -5.8 A ISM Pulsed Source Current -- -- -23.2 A VSD Diode Forward Voltage IS = -1 A , VGS = 0 V , TJ=25°C -- -- -1 V Note : 1. Repetitive Rating : Pulsed width limited by maximum junction temperature. 2. The data tested by pulsed , pulse width ≦ 300us , duty cycle ≦ 2%. 3. Essentially independent of operating temperature.

Publication Order Number: [ MS69P05] © Bruckewell Technology Corporation Rev. A -2016 ■Characteristics Curve FIG.1-CONTINUOUS DRAIN CURRENT VS. TC FIG.2-NORMALIZED RDSON VS. TJ FIG.3-NORMALIZED VTH VS. TJ FIG.4-GATE CHARGE WAVEFORM FIG.5-NORMALIZED TRANSIENT IMPEDANCE FIG.6-MAXIMUM SAFE OPERATION AREA

Publication Order Number: [ MS69P05] © Bruckewell Technology Corporation Rev. A -2016 ■Characteristics Curve FIG.7-SWITCHING TIME WAVEFORM FIG.8-EAS WAVEFORM

Publication Order Number: [ MS69P05] © Bruckewell Technology Corporation Rev. A -2016 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY , FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein.