P6SMB_A BWTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 600W surge capability at 1ms
  • Excellent clamping capability
  • Low zener impedance
  • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.)
  • Typical IR less then 1μA above 10V
  • RoHS compliant package

Applications

  • For Bi-directional use CA Suffix
  • Electrical characteristics apply in both directions Mechanical Data
  • Case : SMB Molded plastic
  • Epoxy : UL94V-0 rate flame retardant
  • Lead : Lead Formed for Surface Mount
  • Polarity : Color band denotes cathode end
  • Mounting position : Any
  • Weight : 0.93 gram Packing & Order Information 3,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Symbol Parameter Value Unit PPK Peak Power Dissipation at Ta = 25ºC, Tp=1ms (Note1) Minimum 600 W PD Steady State Power Dissipation at TL = 75 °C 5 W IFSM Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps. 100 A TJ, TSTG Operating and Storage Temperature Range 55 to + 150 °C

P6SMB_A VBR : 6.8 - 440 Volts PPK : 600 Watts Publication Order Number: [ P6SMB_A] © Bruckewell Technology Corporation Rev. A -2014 Notes: (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on copper Lead area at 5.0 mm2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per Minutes maximum. ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Type No. Breakdown Voltage @ It ( Note 1 ) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Current Maximum Clamping Voltage @ IRSM Maximum Temperature Co-efficient of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C)

P6SMB_A VBR : 6.8 - 440 Volts PPK : 600 Watts Publication Order Number: [ P6SMB_A] © Bruckewell Technology Corporation Rev. A -2014 ELECTRICAL CHARACTERISTICS (Rating at 25ºC ambient temperature unless otherwise specified) Type No. Breakdown Voltage @ It ( Note 1 ) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Current Maximum Clamping Voltage @ IRSM Maximum Temperature Co-efficient of VBR VBR (V) It VRWM IR IRSM VRSM Min Max (mA) (V) (μA) (A) (V) (% / °C) P6SMB120A 114 126 1.0 102 5.0 3.6 165 0.107 P6SMB130A 124 137 1.0 111 5.0 3.3 179 0.107 P6SMB150A 143 158 1.0 128 5.0 2.9 207 0.108 P6SMB160A 152 168 1.0 136 5.0 2.7 219 0.108 P6SMB170A 162 179 1.0 145 5.0 2.6 234 0.108 P6SMB180A 171 189 1.0 154 5.0 2.4 246 0.108 P6SMB200A 190 210 1.0 171 5.0 2.2 274 0.108 P6SMB220A 209 231 1.0 185 5.0 1.83 328 0.108 P6SMB250A 237 263 1.0 214 5.0 1.75 344 0.110 P6SMB300A 285 315 1.0 256 5.0 1.45 414 0.110 P6SMB350A 332 368 1.0 300 5.0 1.25 482 0.110 P6SMB400A 380 420 1.0 342 5.0 1.10 548 0.110 P6SMB440A 418 462 1.0 376 5.0 1.00 602 0.110 Notes: ( 1 ) VBR measured after It applied for 300 μs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. ( 4 ) "P6SMB" will be omitted in marking on the diode.

P6SMB_A VBR : 6.8 - 440 Volts PPK : 600 Watts Publication Order Number: [ P6SMB_A] © Bruckewell Technology Corporation Rev. A -2014 ■RATING AND CHARACTERISTIC CURVES ( P6SMB SERIES ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE FIG.5 - PULSE WAVEFORM

P6SMB_A VBR : 6.8 - 440 Volts PPK : 600 Watts Publication Order Number: [ P6SMB_A] © Bruckewell Technology Corporation Rev. A -2014 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY , FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein.