MSK611 MSK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
4707 Dey Road Liverpool, N.Y. 13088 M.S.KENNEDY CORP. (315) 701-6751 FEATURES: Low Quiescent Current - ±25mA for High Voltage Stage 110V Peak to Peak Output Voltage Swing Slew Rate - 6000V/µS Typical @ 100Vpp Small Signal Rise Time - 6nS Typical Power Output Frequency - 7 MHz Typical Output Current - 150mA Peak Adjustable VHV Power Supply Minimizes Power Dissipation Compact Package Offers Superior Power Dissipation 611 +VHV +VSC OUTPUT CASE/GROUND -VSC -VCC COMP +VCC GROUND N/C -INPUT N/C Wideband High Voltage Amplifier High Resolution CRT Monitor Ultra High Performance Video Processing CRT Beam Intensity Control Varactor Tuned VCO Driver Automatic Test Equipment PIN-OUT INFORMATION TYPICAL APPLICATIONS The MSK 611 is a high voltage ultra high slew rate amplifier designed to provide large voltage swings in wideband systems. The true inverting op-amp topology employed in the MSK 611 provides excellent D.C. specifications such as input offset voltage and input bias current. These attributes are important in amplifiers that will be used in high gain configurations since the input error voltages will be multiplied by the system gain. The MSK 611 achieves impressive slew rate specifications by employing a feed forward A.C. path through the amplifier, however, the device is internally configured in inverting mode to utilize this benefit. Internal compensation for gains of -5V/V or greater keeps the MSK 611 stable in this range. The MSK 611 is packaged in a space efficient, hermetically sealed, 12 pin power dual in line package that has a high thermal conductivity for efficient device cooling. DESCRIPTION: EQUIVALENT SCHEMATIC MIL-PRF-38534 QUALIFIED ISO 9001 CERTIFIED BY DSCC ULTRA HIGH SLEW RATE HIGH VOLTAGE AMPLIFIER Rev. B 8/00
@ +VCC @ -VCC @ +VHV @ -VSC VIN=0 ±VCC +VHV, +VSC -VSC f=1KHz f=1KHz V0=100Vpp V0=1Vpp V0=100Vpp f=1KHz AV=-10V/V VO=50Vpp AV=-10V/V VO=50Vpp +130VDC -18VDC ±VCC ±18VDC 30°C/W -65°C to +150°C 300°C -40°C to +125°C -55°C to +125°C 150°C ABSOLUTE MAXIMUM RATINGS TST TLD TC TJ +VHV,+VSC -VSC ±VIN ±VCC θJC Supply Voltage Supply Voltage Input Voltage Range Supply Voltage (Input Stage) Thermal Resistance (Output Devices) STATIC Input Offset Voltage Drift DYNAMIC CHARACTERISTICS Output Voltage Swing Peak Output Current Full Power Output Frequency Unity Gain Bandwidth Slew Rate Voltage Gain Settling Time to 1% Settling Time to 0.1% Group A Subgroup 1,2,3 1,2,3 1,2,3 1,2,3 2,3 2,3 2,3 Typ. 1.0 ±1.0 ±2.0 100 ±10 ±15 120 -15 110 ±150 150 6000 100 100 250 Min. ±12 -18 100 ±125 5500 Max. 2.0 ±5.0 ±10.0 250 500 ±50 ±18 130 Min. ±12 -18 100 ±125 5500 Max. 2.0 ±10 500 ±18 130 MSK 611B MSK 611 Parameter Test Conditions ELECTRICAL SPECIFICATIONS Units Typ. 1.0 ±1.0 ±2.0 100 ±10 ±15 120 -15 110 ±150 150 6000 100 100 250 Quiescent Current Input Offset Voltage Input Bias Current VIN=0 Power Supply Range 2 mA mA mA mA mV mV nA nA µV/°C V V V Vpp mA MHz MHz V/µS dB nS nS Unless otherwise specified, ±VCC=±15VDC, +VHV=+VSC=+120VDC, -VSC=-15VDC, CL=5pF (probe capacitance) and AV=10V/V. This parameter is guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only. Industrial grade devices shall be tested to subgroups 1 and 4 unless otherwise specified. Military grade devices ('B' suffix) shall be 100% tested to subgroups 1,2,3 and 4. Subgroup 1,4 TC=+25°C Subgroup 2,5 TJ=+125°C Subgroup 3,6 TA=-55°C The output voltage swing is typically within 8 volts of each VSC supply setting. Includes +VSC quiescent current. NOTES: VIN=0 Storage Temperature Range Lead Temperature Range (10 Seconds) Case Operating Temperature MSK611 MSK611B Junction Temperature Rev. B 8/00
ORDERING INFORMATION
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. MECHANICAL SPECIFICATIONS M.S. Kennedy Corp.
4707 Dey Road, Liverpool, New York 13088
Phone (315) 701-6751 FAX (315) 701-6752 www.mskennedy.com MSK611B ALL DIMENSIONS ARE ±0.010 INCHES UNLESS OTHERWISE LABELED Part Number Rev. B 8/00 NOTE: ESD Triangle indicates Pin 1. Military-Mil-PRF-38534