MSK198RHL_15 MSK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
FEATURES: Manufactured using Space Qualified RH1498 Die MIL-PRF-38534 Class K Processing & Screening Total Dose Tested to 100 Krads(Si) (Method 1019.7 Condition A) Rail - to - Rail Input and Output 800µV Max Vos from V+ to V- Gain - Bandwidth Prduct: 10MHz Slew Rate: 6V/uS Typical Low Supply Current per Amplifier: 1.7mA Stable for Capacitive Loads Up to 10,000pF Large Output Drive Current: 30mA Wide Supply Range: 4.5V to ±15V Contact MSK for MIL-PRF-38534 Qualification and Radiation Status Battery Powered Precision Instrumentation Driving A - to - D Converters Rail - to - Rail Buffer Amplifiers Low Voltage Signal Processing Active Filters TYPICAL APPLICATIONS PIN-OUT INFORMATION RAD HARD DUAL PRECISION OP-AMP MIL-PRF-38534 AND 38535 CERTIFIED FACILITY OUT A NC -IN A NC +IN A NC CASE/LID +IN B NC -IN B NC OUT B NC NC DESCRIPTION: The MSK198RHL is a radiation hardened dual operational amplifier for use in space and severe military applications. This device offers rail-to-rail input and output, 10MHz gain-bandwidth product and 6V/uS slew rate. With a wide supply range of 4.5V to ±15V and drive current to 30mA, these op amps remain stable while driving capacitve loads up to 10,000pF. The MSK198RHL is an ideal solution when multiple robust precision amplifiers are required and board space is at a premium. The hermetically sealed MSK198RHL is offered in a leadless ceramic chip carrier package for surface mount applications. EQUIVALENT SCHEMATIC 8548-33 Rev. A 1/15 CASE; LID = PIN 8 198RHL
(10 Seconds) Junction Temperature Case Operating Temperature Range MSK198K/H RHL MSK198RHL ESD Rating Total Supply Voltage (V+ to V-) Input Current Output Short - Circuit Duration -65°C to +150°C 300°C 150°C -55°C to+125°C -40°C to +85°C 36V ±10mA Indefinite ABSOLUTE MAXIMUM RATINGS TST TLD TJ TC ELECTRICAL SPECIFICATIONS 8548-33 Rev. A 1/15
ELECTRICAL SPECIFICATIONS CONT'D Unless otherwise specified; VS=±15V, VCM=VOUT=0V Matching parameters are the difference between amplifiers A and B. Input Offset Voltage Match and Input Bias Current Match are not specified for post radiation. Output Voltage swings are measured between the output and power supply rails. Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only. Industrial grade devices shall be tested to subgroup 1 and 4 unless otherwise specified. Military grade devices shall be 100% tested to subgroups 1,2,3 and 4. Subgroups 5 and 6 testing available upon request. Subgroup 1, 4 TA=TC=+25°C Subgroup 2, 5 TA=TC=+125°C Subgroup 3, 6 TA=TC=-55°C Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle. Pre and Post irradiation limits at 25°C, to 100K TID, are identical unless otherwise specified. NOTES: 8548-33 Rev. A 1/15
TYPICAL PERFORMANCE CURVES 5 8548-33 Rev. A 1/15
ESD TRIANGLE INDICATES PIN 1 WEIGHT=TBD
ORDERING INFORMATION
L=LCCC PACKAGE RADIATION HARDENED SCREENING BLANK= INDUSTRIAL H=MIL-PRF-38534 CLASS H; K=MIL-PRF-38534 CLASS K GENERAL PART NUMBER MSK198 K RH L The above example is a Class K Dual Operational Amplifier in an LCCC package. MECHANICAL SPECIFICATIONS ALL DIMENSIONS ARE SPECIFIED IN INCHES 8548-33 Rev. A 1/15
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent revision of this datasheet. Contact MSK for MIL-PRF-38534 qualification and radiation status. MSK www.anaren.com/msk
REVISION HISTORY
8548-33 Rev. A 1/15