MSK0032

MSK0032 MSK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

The MSK 0032 is a high speed, FET input, differential amplifier designed to replace the popular LH0032 and TP0032. Since the MSK 0032 requires less compensation than the LH0032, it exhibits wider bandwidth and greater stability. The MSK 0032 can be used as a direct replacement in current designs using the LH0032 or TP0032 with no changes to compensation schemes. High frequency signal transfer circuits such as video amplifiers, high speed integrators and comparators are just a few of the applications that the MSK 0032 is well suited for. 4707 Dey Road Liverpool, N.Y. 13088 M.S.KENNEDY CORP. (315) 701-6751 0032 FEATURES: Fast Slew Rate - 650 V/µS Typ. FET Input Wide Bandwidth Electrically Isolated Case Industry Wide Pin Compatible 0032 Upgrade DSCC SMD 5962-80013 DESCRIPTION: EQUIVALENT SCHEMATIC No Connection No Connection No Connection Negative Power Supply Output Positive Power Supply No Connection Output Compensation Compensation/Balance Compensation/Balance Inverting Input Non-Inverting Input PIN-OUT INFORMATION Video Amplifiers Comparator Circuits High Speed Integrators TYPICAL APPLICATIONS MIL-PRF-38534 CERTIFIED Rev. C 9/061 HIGH SPEED, FET INPUT DIFFERENTIAL OP-AMP

Input Offset Voltage Drift Input Offset Adjust Input Bias Current Input Offset Current Input Impedance Power Supply Rejection Ratio Common Mode Rejection Ratio Input Noise Voltage Equivalent Input Noise OUTPUT Output Voltage Swing Output Current Settling Time to 1% Settling Time to 0.1% Unity Gain Bandwidth TRANSFER CHARACTERISTICS Slew Rate Limit Open Loop Voltage Gain Small Signal Rise Time Small Signal Delay Time V IN=0V Bal.Pins=N/C VIN=0V AV=-10V/V Bal.Pins=N/C VIN=0V RPOT=10KΩ To +VCC VCM=0V Either Input VCM=0V F=DC Δ VCC=±15V F=DC VCM=±10V F=10Hz To 1MHz F=1KHz RL=1KΩ RL=1KΩ RL=1KΩ 10V step RL=1KΩ 10V step AV=+1 VOUT=±10V RL=1KΩ VOUT=±10V F=100Hz AV = +1 RL = 1KΩ VIN = 1V RL = 1KΩ ±18V ±40mA ±30V -55°C to +125°C -40°C to +85°C 200°C/W ABSOLUTE MAXIMUM RATINGS TST TLD TJ Storage Temperature Range Lead Temperature Range (10 Seconds) Junction Temperature -65°C to +150°C 300°C 175°C ±VCC IOUT VIN TC RTH AV=-1, measured in false summing junction circuit. Devices shall be capable of meeting the parameter, but need not be tested. Typical parameters are for reference only. Industrial grade devices shall be tested to subgroups 1 and 4 unless otherwise specified. Military grade devices ('B' suffix) shall be 100% tested to subgroups 1,2,3 and 4. Subgroup 5 and 6 testing available upon request. Subgroup 1,4 T A=TC=+25°C Subgroup 2,5 TA=TC=+125°C Subgroup 3,6 TA=TC=-55°C Electrical specifications are derated for power supply voltages other than ±15VDC. Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cyle. NOTES: Supply Voltage Output Current Differential Input Voltage Case Operating Temperature Range (MSK 0032B) (MSK 0032) Thermal Resistance Junction to Case Output Devices Only ELECTRICAL SPECIFICATIONS ±Vcc=±15V Unless Otherwise Specified Min. ±10 ±10 ±10 350 Max. ±18 ±20 ±25 ±50 ±100 ±50 0.5 Min. ±10 ±10 350 Max. ±18 ±22 ±300 100 0.5 Units V mA mA mV µV/°C mV pA nA pA nA Ω dB dB µVrms nV√Hz V mA µS nS MHz V/µS dB nS nS MSK 0032B MSK 0032 Typ. ±15 ±15 ±25 1.5 ±12 ±20 0.1 300 650 Test Conditions Parameter Typ. ±15 ±15 ±18 ±0.5 ±10 ±10 ±0.2 0.1 1.5 ±12 ±20 0.1 300 650 Adjust to Zero Adjust to Zero 12 12 Group A Subgroup 2,3 2,3 1,2,3 2,3 2,3 Rev. C 9/062

TYPICAL PERFORMANCE CURVES Rev. C 9/064

ORDERING INFORMATION

The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent version of this datasheet. MECHANICAL SPECIFICATIONS M.S. Kennedy Corp.

4707 Dey Road, Liverpool, New York 13088

Phone (315) 701-6751 FAX (315) 701-6752 www.mskennedy.com MSK0032B Part Number Rev. C 9/065 WEIGHT = 2.9 GRAMS TYPICAL MIL-PRF-38534, Class H 5962-80013 DSCC-SMD ALL DIMENSIONS ARE ±0.010 INCHES UNLESS OTHERWISE LABELED