MSK0006 MSK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
4707 Dey Road Liverpool, N.Y. 13088 (315) 701-6751 MIL-PRF-38534 QUALIFIED 0006 ISO-9001 CERTIFIED BY DSCC M.S.KENNEDY CORP. FEATURES: Logic Level Translator Relay Driver Lamp Driver HIGH LEVEL DIGITAL DRIVER EQUIVALENT SCHEMATIC TYPICAL APPLICATIONS DESCRIPTION: The MSK 0006 is an integrated high voltage, high current driver designed to accept standard DTL or TTL logic levels and drive a load of up to 400 mA at 28V. AND inputs are provided along with an Expander connection, should additional gating be required. The addition of an external capacitor provides control of the rise and fall times of the output. The device is packaged in a hermetic 10 pin can. PIN-OUT INFORMATION Output Response Time Control C Response Time Control B NC Ground Vcc Input Input Expander NC Single Supply Operation From 10V to 45V Replaces NH/DH0006 'And' Input Logic With Expander External Transition Time Control Output Current to 400mA Available to DSCC SMD 5962-87617 Rev. - 6/02 MSK0006
(10 Seconds) Case Operating Temperature (MSK 0006H/E) (MSK 0006) Junction Temperature ABSOLUTE MAXIMUM RATINGS 60V 1.5A 5.5V 5mA Supply Voltage (t ≤ 0.1 sec) Output Current (50mS) Input Voltage Expander Input Current -65°C to +150°C 300°C -55°C to +125°C -40°C to +85°C 175°C TST TLD TC TJ VCC IOUT VIN IIN VCC=45V, Cf=NC and IOUT=0mA unless otherwise specified. Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only. Industrial grade and "E" suffix devices shall be tested to subgroups 1 and 4 unless otherwise requested. Military grade devices ("H" suffix) shall be 100% tested to subgroups 1,2,3 and 4. Subgroup 5 and 6 testing available upon request. Subgroup 1,4 TC=+25°C Subgroup 2,5 TC=+125°C Subgroup 3,6 TA=-55°C Measured from 50% of VIN to 90% of VOUT transition. NOTES: Group A Subgroup 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 4,5,6 4,5,6 4,5,6 4,5,6 Continuous 10V ≤ VCC ≤ 45V 10V ≤ VCC ≤ 45V VCC=28V VIN=2V RL=82Ω VCC=10V VIN=2V IO=150mA VIN=0.8V RL=100Ω VIN=2.4V VIN=5.5V VIN=0.4V VIN=0.8V VIN=2.0V VCC=28V RL=82Ω VCC=28V RL=82Ω VCC=28V RL=82Ω VCC=28V RL=82Ω Junction to Case @ TC=125°C Typ. 0.5 100 0.8 0.3 2.2 Test Conditions Max. 5.5 0.8 100 2.0 300 1.7 1.0 8.0 Min. 2.0 26.5 8.8 -1.0 Min. 2.0 8.5 -1.1 Max. 5.5 0.8 150 2.2 8.5 325 1.8 1.1 8.2 Typ. 0.5 100 0.8 0.3 2.2 V V V V V mV µA µA mA mA mA nS µS µS µS °C/W MSK0006H/E MSK0006 Parameter ELECTRICAL SPECIFICATIONS Rev. - 6/02 Units 2 7
Rev. - 6/02
TYPICAL PERFORMANCE CURVES Rev. - 6/02
ESD TRIANGLE INDICATES PIN 1. ALL DIMENSIONS ARE ±0.010 INCHES UNLESS OTHERWISE LABELED. Rev. - 6/02 The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make changes to its products or specifications without notice, however, and assumes no liability for the use of its products. Please visit our website for the most recent revision of this datasheet. M.S. Kennedy Corp.
4707 Dey Road, Liverpool, New York 13088
Phone (315) 701-6751 FAX (315) 701-6752 www.mskennedy.com MSK0006