MSD611 CONNOR-WINFIELD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a HC176 09/12/06 CRYSTAL CONTROLLED OSCILLATORS The Connor-Winfield MSD611 is a hermetically sealed surface mount 5.0V Crystal Controlled Oscillator (XO) HCMOS/TTL Compatible. The MSD611 is designed for applications requiring low jitter and tight frequency stability. MSD611 - 77.76 MHz CLOCK SERIES CENTER FREQUENCY 5.0V OPERATION LOW JITTER <1ps RMS FREQUENCY TOLERANCE: ±25ppm TEMPERATURE RANGE: -40 to 85°C TRI-STATE ENABLE / DISABLE FUNCTION TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE LEADLESS SURFACE MOUNT HCMOS CLOCK OSCILLATOR MSD611
ORDERING INFORMATION
FEATURES
DESCRIPTION
77.76M ABSOLUTE MAXIMUM RATINGS TABLE 1.0 PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE Storage Temperature -55 125 Supply Voltage (Vcc) -0.5 Vdc OPERATING SPECIFICATIONS TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Frequency Range (Fo) 1.8 MHz Total Frequency Tolerance -25 ppm Operating Temperature Range -40 Supply Voltage (Vcc) 4.50 5.00 5.50 Vdc Supply Current (Icc) mA Jitter (BW=10Hz to 20MHz) ps rms Jitter (BW=12kHz to 20MHz) ps rms SSB Phase Noise at 10Hz offset -60 dBc/Hz SSB Phase Noise at 100Hz offset -90 dBc/Hz SSB Phase Noise at 1KHz offset -125 dBc/Hz SSB Phase Noise at 10KHz offset -135 dBc/Hz SSB Phase Noise at 100KHz offset -140 dBc/Hz INPUT CHARACTERISTICS TABLE 3.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE Tri-state Enable Voltage (Vih) >70%Vcc Vdc Tri-state Disable Voltage (Vil) <30%Vcc Vdc HCMOS OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE LOAD pF Voltage (High) (Voh) > 0.9(Vcc) Vdc (Low) (Vol) < 0.1(Vcc) Vdc Current (High) (Ioh) -16 mA (Low) (Ioh) mA Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% 1.5 nS Note: 1) Inclusive of calibration, frequency vs. temperature stability, supply voltage change, load change, shock and vibration, 20 years aging. 2) Oscillator output is enabled with no connection on pad 1 PACKAGE CHARACTERISTICS TABLE 5.0 Package Hermetically sealed, leadless ceramic package.
THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM P R O D U C T D A T A S H E E T Specifications subject to change without notice. DATA SHEET #: REV: DATE: PAGE OF Copyright 2001 Connor-Winfield all rights reserved. a HC176 09/12/06 CRYSTAL CONTROLLED OSCILLATORS Pin Connection Enable / Disable N/C Ground Output N/C Vcc E/D 50pF Dimensional Tolerance: ±.005 (.127mm) CW 0634 MSD611 77.76M 120°C 150°C 180°C 260°C 220°C 360 Sec. Max. 120 S Max. 10 S 60 S Max. Time Temperature 260°C Package Outline Suggested Pad Layout Output Waveform Solder Profile Test Circuit Pin Connections