MSC49N02X BWTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • 40V,140A, RDS(ON) =2.2mΩ@VGS = 10V
  • Improved dv/dt capability
  • Fast switching
  • Green Device Available
  • RoHS compliant package

Applications

  • PowerTools
  • Load Switch
  • LED applications
  • Motor Drive Applications PPAK5X6 Pin Configuration Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (TA=25°C unless otherwise noted) Symbol Parameter Value Unit VDS Drain-Source Voltage 40 V VGS Gate-Source Voltage ±20 V ID Drain Current - Continuous (TC=25°C) (Chip Limitation) 140 A Drain Current - Continuous (TC=100°C) (Chip Limitation) 88 A IDM Drain Current - Pulsed1 560 A EAS Single Pulse Avalanche Energy2 360 mJ

Publication Order Number: [ MSC49N02X] © Bruckewell Technology Corporation Rev. A -2016 Absolute Maximum Ratings (TA=25°C unless otherwise noted) Symbol Parameter Value Unit IAS Single Pulse Avalanched Current2 85 A PD Power Dissipation (TC=25°C) 142 W Power Dissipation - Derate above 25°C 1.14 W/°C TJ Operating Junction Temperature Range -55 to +150 °C TSTG Storage Temperature Range -55 to +150 °C Thermal Characteristics Symbol Parameter Typ. Max. Units RΘjA Thermal Resistance Junction to ambient -- 62 °C/W RθJC Thermal Resistance Junction to Case -- 0.88 Electrical Characteristics (TJ=25℃, unless otherwise noted) Off Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units BVDSS Drain-Source Breakdown Voltage VGS = VGS, ID = 250uA 40 V IGSS Gate-Source Leakage Current VDS = 0 V , VGS = ±20 V ±100 nA IDSS Drain-Source Leakage Current VDS = 40 V , VGS = 0 V , TJ= 25°C VDS = 32 V , VGS = 0 V , TJ= 125°C uA On Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units RDS(on) Drain-Source On-Resistance VGS = 10 V, ID = 30 A VGS = 4.5 V , ID = 20 A 1.7 2.1 2.2 mΩ VGS(th) Gate Threshold Voltage VDS = VGS, ID =-250μA 1.2 1.6 2.5 V gfs Forward Tranconductance VDS = 10 V , IS = 10 A 45 S Dynamic and switching Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units Qg Total Gate Charge3,4 VDS = 20 V , ID = 10 A, VGS = 4.5 V -- 70 140 nC Qgs Gate-Source Charge3,4 -- 15 32 nC Qgd Gate-Drain Charge3,4 -- 40 80 nC CISS Input Capacitance VDS = 25 V f = 1 MHz , VGS = 0 V -- 8000 12000 pF COSS Output Capacitance -- 550 1000 pF CRSS Reverse Transfer Capacitance -- 420 800 pF Rg Total Gate Charge VDS = 0 V , f = 1 MHz , VGS = 0 V -- 1.2 2.4 Ω

Publication Order Number: [ MSC49N02X] © Bruckewell Technology Corporation Rev. A -2016 Dynamic and switching Characteristics Symbol Parameter Test Conditions Min Typ. Max. Units td(on) Turn-On Delay Time3,4 ID = 10 A , RG = 10 Ω, VGS = 10 V , VDD = 20 V -- 24.6 48 ns tr Rise Time3,4 -- 62.8 120 ns td(off) Turn-Off Delay Time3,4 -- 224 440 ns tf Fall Time3,4 -- 162 320 ns Drain-Source Diode Characteristics and Maximum Ratings Symbol Parameter Test Conditions Min Typ. Max. Units IS Continuous Source Current VG = VD = 0 V , Force Current -- -- 140 A ISM Pulsed Source Current -- -- 280 A VSD Diode Forward Voltage VGS = 0 V , IS = 1 A , TJ = 25°C -- -- 1 V trr Reverse Recovery Time VGS = 0 V , IS = 1 A , di/dt=100A/μs , TJ=25°C -- 32 -- ns Qrr Reverse Recovery Charge -- 19 -- nC Note : 1.Repetitive Rating : Pulsed width limited by maximum junction temperature. 2.VDD=25V,VGS=10V,L=1mH,IAS=8A.,RG=25Ω,Starting TJ=25℃. 3.The data tested by pulsed , pulse width ≦ 300us , duty cycle ≦ 2%. 4.Essentially independent of operating temperature.

Publication Order Number: [ MSC49N02X] © Bruckewell Technology Corporation Rev. A -2016 ■Characteristics Curve FIG.1-CONTINUOUS DRAIN CURRENT VS. TC FIG.2-NORMALIZED RDSON VS. TJ FIG.3-NORMALIZED VTH VS. TJ FIG.4-GATE CHARGE WAVEFORM FIG.5-NORMALIZED TRANSIENT IMPEDANCE FIG.6-MAXIMUM SAFE OPERATION AREA

Publication Order Number: [ MSC49N02X] © Bruckewell Technology Corporation Rev. A -2016 ■Characteristics Curve FIG.7-SWITCHING TIME WAVEFORM FIG.8-EAS WAVEFORM

Publication Order Number: [ MSC49N02X] © Bruckewell Technology Corporation Rev. A -2016 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY , FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein.