MSA-0505 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Cascadable 50 Ω Gain Block
  • High Output Power: 18.0 dBm Typical P1 dB at 1.0 GHz
  • Low Distortion: 29.0 dBm Typical IP3 at 1.0 GHz
  • 7.0 dB Typical Gain at 1.0 GHz
  • Surface Mount Plastic Package
  • Tape-and-Reel Packaging Option Available
  • Lead-free Option Available

05 Plastic Package

Description

The MSA-0505 is a high performance medium power silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a low cost, surface mount package. This MMIC is designed for use as a general purpose 50Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in commercial systems. The MSA-series is fabricated using Avago’s 10 GHz fT, 25 GHz fMAX, silicon bipolar MMIC process which uses nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration Cblock Cblock Rbias VCC > 12 V Vd = 8.4 V RFC (Optional) IN OUTMSA

Parameter Absolute Maximum[1] Device Current 135 mA Power Dissipation[,3] 1.5 W RF Input Power +5 dBm Junction Temperature 00°C Storage Temperature –65 to 150°C Thermal Resistance[2]: θjc = 85°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. T CASE = 25°C. 3. Derate at 11.8 mW/°C for TC > 73°C. P1 dB Output Power at 1 dB Gain Compression f = 0.5 GHz dBm 19.0 f = 1.0 GHz dBm 16.0 18.0 GP Power Gain (|S1| ) f = 0.5 GHz dB 7.5 f = 1.0 GHz 6.0 7.0 ∆GP Gain Flatness f = 0.1 to 1.5 GHz dB ±0.75 f3 dB 3 dB Bandwidth[] GHz .3 Input VSWR f = 0.1 to 1.5 GHz 1.6:1 Output VSWR f = 0.1 to 1.5 GHz .0:1 IP3 Third Order Intercept Point f = 1.0 GHz dBm 9.0 NF 50 Ω Noise Figure f = 1.0 GHz dB 6.5 tD Group Delay f = 1.0 GHz psec 190 Vd Device Voltage V 6.7 8.4 10.1 dV/dT Device Voltage Temperature Coefficient mV/°C –16.0 Notes: 1. The recommended operating current range for this device is 60 to 100 mA. Typical performance as a function of current is on the following page. 2. Referenced from 0.1 GHz Gain (GP). Electrical Specifications [1], TA = 25°C Symbol Parameters and Test Conditions: Id = 80 mA, ZO = 50 Ω Units Min. Typ. Max. VSWR

Ordering Information

Part Numbers No. of Devices Comments MSA-0505-STR 10 Bulk MSA-0505-STRG 100 Bulk MSA-0505-TR1 500 7" Reel MSA-0505-TR1G 500 7" Reel Note: Order part number with a “G” suffix if lead-free option is desired.

Figure 1. Typical Gain vs. Power Out,

0.1 GHz

0.5 GHz

1.0 GHz

1.5 GHz

2.0 GHz

Figure 2. Device Current vs. Voltage. Figure 3. Output Power at 1 dB Gain Compression, vs. Case Temperature, Id = 80 mA. Figure 5. Output Power at 1 dB Gain Compression, Figure 4. Gain vs. Frequency, Id = 80 to 100 mA.

05 Plastic Package Dimensions

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 008 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-754EN AV0-17EN May 14, 008 0.030 0.89 0.100 ± 0.010 2.54 ± 0.25 0.135 ± 0.015 3.42 ± 0.25 (4 PLCS) 1 3 0.008 ± 0.002 0.20 ± 0.05 0.0005 ± 0.010 (0.013 ± 0.25) 0.050 1.27 GROUND RF INPUT RF OUTPUT AND DC BIAS GROUND 0.030 0.76 0.030 0.76 0.145 3.68 0.020 0.51 DIA 0.030 ± 0.010 0.76 ± 0.25 (4 PLCS) Notes: (unless otherwise specified) 1. Dimensions are in 2. Tolerances in .xxx = 0.005 mm .xx = 0.13 mm