MSA-0336 AVAGO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Cascadable 50 Ω Gain Block
- 3 dB Bandwidth: DC to 2.7 GHz
- 12.0 dB Typical Gain at 1.0 GHz
- 10.0 dBm Typical P1d B at 1.0 GHz
- Unconditionally Stable (k>1)
- Cost Effective Ceramic Microstrip Package
Description
The MSA-0336 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a cost effective, microstrip package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in industrial and military applications. The MSA-series is fabricated using Avago’s 10 GHz fT,
25 GHz fMAX, silicon bipolar MMIC process which uses
nitride self-alignment, ion implantation, and gold met- allization to achieve excellent performance, unifor- mity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration Cblock Cblock Rbias VCC > 7 V Vd = 5 V RFC (Optional) IN OUT MSA 36 micro-X Package
Parameter Absolute Maximum [1] Device Current 80 mA Power Dissipation[2,3] 425 mW RF Input Power +13 dBm Junction Temperature 150 °C Storage Temperature[4] –65 to 150°C Thermal Resistance[2,5]: θjc = 150°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. T CASE = 25°C. 3. Derate at 6.7 mW/ °C for TC > 136°C. 4. Storage above +150 °C may tarnish the leads of this package making it difficult to solder into a circuit. 5. The small spot size of this technique results in a higher, though more accurate determination of θjc than do alternate methods. GP Power Gain (|S 21|2) f = 0.1 GHz dB 11.5 12.5 13.5 ∆GP Gain Flatness f = 0.1 to 1.6 GHz dB ±0.6 ±1.0 f3 dB 3 dB Bandwidth GHz 2.7 Input VSWR f = 0.1 to 3.0 GHz 1.6:1 Output VSWR f = 0.1 to 3.0 GHz 1.7:1 NF 50 Ω Noise Figure f = 1.0 GHz dB 6.0 P1 dB Output Power at 1 dB Gain Compression f = 1.0 GHz dBm 10.0 IP3 Third Order Intercept Point f = 1.0 GHz dBm 23.0 tD Group Delay f = 1.0 GHz psec 125 Vd Device Voltage V 4.5 5.0 5.5 dV/dT Device Voltage Temperature Coefficient mV/ °C –8.0 Notes: 1. The recommended operating current range for this device is 20 to 50 mA. Typical performance as a function of current is on the following page. Electrical Specifications[1], TA = 25°C Symbol Parameters and Test Conditions: I d = 35 mA, ZO = 50 Ω Units Min. Typ. Max. VSWR
Ordering Information
Part Numbers No. of Devices Comments MSA-0336-BLKG 100 Bulk MSA-0336-TR1G 1000 7" Reel
Figure 1. Typical Power Gain vs. Frequency, TA = 25°C, Id = 35 mA. Figure 2. Device Current vs. Voltage. Figure 3. Power Gain vs. Current. Figure 6. Noise Figure vs. Frequency. Figure 5. Output Power at 1 dB Gain Figure 4. Output Power at 1 dB Gain Compression, NF and Power Gain vs.
0.1 GHz
0.5 GHz
1.0 GHz
2.0 GHz
2.15 (0.085) 2.11 (0.083) DIA. 0.508 (0.020) 2.54 (0.100) 4.57 ± 0.25 0.180 ± 0.010 0.15 ± 0.05 (0.006 ± 0.002) Notes: 1. Dimensions are in millimeters (inches) 2. Tolerances: in .xxx = ± 0.005 mm .xx = ± 0.13 0.56 (0.022) 1.45 ± 0.25 (0.057 ± 0.010) 36 micro-X Package Dimensions For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countrie s. Data subject to change. Copyright © 2007 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-2739EN AV02-0302EN - April 12, 2007