MSA-0236 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Cascadable 50 Ω Gain Block
  • 3 dB Bandwidth: DC to 2.7 GHz
  • 12.0 dB Typical Gain at 1.0 GHz
  • Unconditionally Stable (k>1)
  • Cost Effective Ceramic Microstrip Package

Description

The MSA-0236 is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a cost effective, microstrip package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in industrial and military applications. The MSA-series is fabricated using Avago’s 10 GHz fT,

25 GHz fMAX, silicon bipolar MMIC process which uses

nitride self-alignment, ion implantation, and gold metallization to achieve excellent performance, uniformity and reliability. The use of an external bias resistor for temperature and current stability also allows bias flexibility. Typical Biasing Configuration Cblock Cblock Rbias VCC > 7 V Vd = 5 V RFC (Optional) IN OUT MSA 36 micro-X Package

Parameter Absolute Maximum [1] Device Current 60 mA Power Dissipation[2,3] 325 mW RF Input Power +13 dBm Junction Temperature 150 °C Storage Temperature[4] –65 to 150°C Thermal Resistance[2,5]: θjc = 145°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. T CASE = 25°C. 3. Derate at 6.9 mW/ °C for TC > 153°C. 4. Storage above +150 °C may tarnish the leads of this package making it difficult to solder into a circuit. 5. The small spot size of this technique results in a higher, though more accurate determination of θjc than do alternate methods. GP Power Gain (|S 21|2) f = 0.1 GHz dB 11.5 12.5 13.5 ∆GP Gain Flatness f = 0.1 to 1.6 GHz dB ±0.6 ±1.0 f3 dB 3 dB Bandwidth GHz 2.7 Input VSWR f = 0.1 to 3.0 GHz 1.2:1 Output VSWR f = 0.1 to 3.0 GHz 1.4:1 NF 50 Ω Noise Figure f = 1.0 GHz dB 6.5 P1 dB Output Power at 1 dB Gain Compression f = 1.0 GHz dBm 4.5 IP3 Third Order Intercept Point f = 1.0 GHz dBm 17.0 tD Group Delay f = 1.0 GHz psec 125 Vd Device Voltage V 4.5 5.0 5.5 dV/dT Device Voltage Temperature Coefficient mV/ °C –8.0 Note: 1. The recommended operating current range for this device is 18 to 40 mA. Typical performance as a function of current is on the following page. Electrical Specifications[1], TA = 25°C Symbol Parameters and Test Conditions: I d = 25 mA, ZO = 50 Ω Units Min. Typ. Max. VSWR

Ordering Information

Part Numbers No. of Devices Comments MSA-0236-BLKG 100 Bulk MSA-0236-TR1G 1000 7" Reel

Figure 1. Typical Power Gain vs. Frequency, TA = 25°C, Id = 25 mA. Figure 3. Power Gain vs. Current. Figure 6. Noise Figure vs. Frequency. Figure 5. Output Power at 1 dB Gain Figure 2. Device Current vs. Voltage. Figure 4. Output Power at 1 dB Gain Compression, NF and Power Gain vs.

0.1 GHz

0.5 GHz

1.0 GHz

2.0 GHz

2.15 (0.085) 2.11 (0.083) DIA. 0.508 (0.020) 2.54 (0.100) 4.57 ± 0.25 0.180 ± 0.010 0.15 ± 0.05 (0.006 ± 0.002) Notes: 1. Dimensions are in millimeters (inches) 2. Tolerances: in .xxx = ± 0.005 mm .xx = ± 0.13 0.56 (0.022) 1.45 ± 0.25 (0.057 ± 0.010) 36 micro-X Package Dimensions For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countrie s. Data subject to change. Copyright © 2007 Avago Technologies, Limited. All rights reserved. Obsoletes 5989-2738EN AV02-0301EN - April 12, 2007