MR750 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
J , U na. 2QS1VP!H*\\L (J.S.A, 0, NEW JERSEY 07081 Designer's™ Data Sheet High Current Lead Mounted Rectifiers
- Current Capacity Comparable to Chassis Mounted Rectifiers
- Very High Surge Capacity
- Insulated Case Mechanical Characteristics:
- Case: Epoxy, Molded
- Weight: 2.5 grams (approximately)
- Finish: All External Surfaces Corrosion Resistant and Terminal Lead is Readily Solderable
- Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
- Polarity: Cathode Polarity Band
- Shipped 1000 units per plastic bag. Available Tape and Reeled, 800 units per reel by adding a "RL" suffix to the part number
- Marking: R750, R751, R752, R754, R758, R760 MAXIMUM RATINGS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Non-Repetitive Peak Reverse Voltage (Halfwave, single phase, 60 Hz peak) RMS Reverse Voltage Average Rectified Forward Current (Single phase, resistive load, 60 Hz) See Figures 5 and 6 Non-Repetitive Peak Surge Current (Surge applied at rated load conditions) Operating and Storage Junction Temperature Range Symbol VRRM VRWM VR VRSM VR(RMS) IFSM TJ, Tstg MR750 MR751 100 120 MR752 200 240 140 22 (T|_ = 60 TELEPHONE: (973) 376-2922 MR754 400 480 280 MR750 MR751 MR752 MR754 MR756 MR758 MR760 HIGH CURRENT LEAD MOUNTED SILICON RECTIFIERS 50-1 000 VOLTS DIFFUSED JUNCTION /•^ MR756 MR758 600 800 720 960 420 560 MR760 1000 1200 700 °C, 1/8" Lead Lengths) 6.0 (TA = 60°C, P.C. Board mounting) ) (for 1 cycle) 65 to +175 • Unit Volts Volts Volts Amps Amps
ELECTRICAL CHARACTERISTICS
Characteristic and Conditions Maximum Instantaneous Forward Voltage Drop (iF = 100 Amps, Tj = 25°C) Maximum Forward Voltage Drop (Ip = 6.0 Amps, TA = 25°C, 3/8" leads) Maximum Reverse Current Tj = 25°C (Rated dc Voltage) Tj = 1 00°C Symbol VF VF IR Max 1.25 0.90 1.0 Unit Volts Volts HA mA n,i* r f ? f r"er!fu vM8o '° C^hange tWt conditions- Pari>™ter limits and package dimensions without not.ce. Information furnished by NJ Semiconductors is believed to be both accurate and reliable at the time of going to press. However. NJ Semiconductors assumes no responsibility for any errors or omissions discovered in its u°e \\ .Vmi-( tmductors entourages customers To verify that datasheets are current before placing orders.