DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.micropowerdirect.com MicroPower Direct
292 Page Street
Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com Input Parameter Conditions Min. Typ. Max. Units Input Voltage Range Universal 90 265 VAC 120 370 VDC Input Frequency 47 63 Hz Input Filter Meets EN 55022 Class B; FCC Class B Input Current See Model Selection Guide Inrush Current Cold Start, 115 VAC 30.0 A PkCold Start, 230 VAC 50.0 Safety Ground Leakage Current 0.5 mA Output Parameter Conditions Min. Typ. Max. Units Output Voltage/Current See Model Selection Guide Output Voltage Tolerance ±2.0 % Line Regulation Vin = Min to Max ±1.0 % Load Regulation Iout = 5% to 100% ±1.0 % Ripple & Noise (20 MHz) See Note 1 Hold-Up Time 115 VAC 10 mSec Temperature Coeffi cient ±0.02 %/°C Over Voltage Protection See Model Selection Guide Overload Protection See Note 2 125 150 % Short Circuit Protection Continuous (Autorecovery) General Parameter Conditions Min. Typ. Max. Units Isolation Voltage Input to Output 3,000 VAC 4,242 VDC Input to Ground 1,500 VAC Output to Ground 500 VAC Switching Frequency Fixed 100 kHz EMI Characteristics Parameter Standard Criteria Level Radiated Emissions EN 55022 B Conducted Emissions EN 55022 B Noise Immunity (EMS) EN 55024 Surge EN 61000-4-4 ±1 kV (L-N) ±2 kV (L-FG & N-FG) Environmental Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient -40 +25 +70 °C Storage Temperature Range -50 +84 °C Cooling Free Air Convection (See Derating Curve) Humidity RH, Non-condensing 95 % Physical Size See Mechanical Drawings Weight U-Channel 8.46 Oz (0.240 kg) With Cover 9.17 Oz (0.260 kg) Reliability Specifi cations Parameter Conditions Min. Typ. Max. Units MTBF MIL HDBK 217F , 25°C, Gnd Benign 130 kHours Safety Standards UL 1950, EN 60950 Vibration 10~500 Hz, 5G 10 min/1 Cycle. Period of 60 min each along X, Y &Z Axis Single Output, 60W Compact, U-Channel AC/DC Power Supplies Key Features:
- 60W Output Power
- Universal 90-265 AC Input
- EN 60950 Approved
- Low Leakage Current
- Six Single Output Models
- Meets EN 55022 B
- >130 kHour MTBF
- “Finger Safe” Cover Avail.
- DIN Rail Kit Available MPU-60SSeries Electrical Specifi cations Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice.
Page 2 • MPD 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com www.micropowerdirect.com Output LED & Voltage Adjust Model Selection Guide Notes: 1. Output ripple is specifi ed as a maximum of <0.2 %V OUT + 40 mV (Vp-p). Output noise is specifi ed as a maximum of <0.5 %V OUT + 40 mV (Vp-p). Ripple and noise is measured at 20 MHz bandwidth using a 0.1 µF and 47 µF capacitor connected in parallel as close to the power supply terminals as possible. 2. Overload protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 3. Over voltage protection is provided by a zener diode clamp. 4. These units will operate at no load without damage, however, they may not meet all specifi cations. MPD recommends that a minimum 1% load always be used . 5. Each unit includes an input fuse. Since this fuse is not fi eld replaceable, it is recommended that an external fuse be used on the input of the power supply for protection. For these units, a 3.15A/250V slow blow fuse is recommended. For U-channel and enclosed models, see MPU-60S Datasheet Model Number Input Output Max Output Power (W) Over Voltage Protection (VDC) Effi ciency (%, Typ) Current (A) Voltage (VDC) Current (A) 115 VAC 230 VAC Rated % Min. Output Load vs Input Voltage: AC Input Ouput LED: An LED lamp next to the output connector. The LED is on (Green)during normal operation. If the LED is not lit, it indicates a problem with the supply. Output Adjust: The output voltage of the MPO-60S can be adjusted by ±10% by using the trim pot located to the side (and just behind) of the output connector. Great care should be taken not to use excessive force when making any adjustment. To much force may damage the wiper arm of the pot, rendering the power supply inoperable. Derating Curve, Output Power vs Temperature Output Load vs Input Voltage: DC Input
www.micropowerdirect.com MicroPower Direct • 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Mechanical Dimensions Input Connector (CN1):
- Barrier Strip Terminal Block: Anytek Connector: DG28S-B-02P M3 Screws 2 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Output Connector (CN2):
- Barrier Strip Terminal Block: Anytek Connector: DG28S-B-02P M3 Screws 2 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Pin Function
1 AC-Neutral
2 AC-Line
Connection 3 (Field Ground) is a plated through hole on the PC Board. Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.02 (±0.50)
Page 4 • MPD 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com www.micropowerdirect.com Mechanical Dimensions Input Connector (CN1):
- Barrier Strip Terminal Block: Anytek Connector: DG28S-B-02P M3 Screws 2 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Output Connector (CN2):
- Barrier Strip Terminal Block: Anytek Connector: DG28S-B-02P M3 Screws 2 terminals, 7.62 mm Centers Suitable Wire = 22 - 14 AWG Pin Function
Connection 3 (Field Ground) is a plated through hole on the PC Board. Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.02 (±0.50) Related products that may be of interest: MPO-60S MPU-240SMPO-120S MPU-120S
- 180W Output Power
- Universal 90 - 264 VAC Input
- Compact Open Frame
- EN 60950 Approved
- 60W Output Power
- Universal 90 - 264 VAC Input
- 4” x 2” Open Frame Construction
- EN 60950 Approved
- 240W Output Power
- EN 60950 Approved
- Compact U-Channel Construction
- Cover & DIN Rail Kit Available
- 180W Output Power
- Compact U-Channel Construction
- Cover & DIN Rail kit available
- EN 60950 Approved
www.micropowerdirect.com MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com OPTIONAL DIN Rail Mounting Kit A DIN Rail Mounting kit is available from MPD, for use with MPU-60S ”C” models. The kit contains a mounting clip and three screws. The clip is attached to the bottom of the unit using the three threaded holes marked “A” on the mechanical diagrams. Screws should not be inserted over 2 mm into the threaded inserts, To order the kit, ask for part no: MPU-60S-DRK DIN Rail Mounting Kit