MPR6000 WJCI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Multi-Protocol MPR 6000 RFID Card EPC Class 0/1 and 0+ in PCMCIA Type II Pkg. Compact Efficient Low Cost WJ Communications 401 River Oaks Parkway, San Jose, CA 95134 WWW.WJ.COM WJ’s MPR 6000 RFID Card provides breakthrough performance in a standard PCMCIA Type II package. These readers represent a new level for size, standards -based compatibility, ease of use and performance. Each RFID Card includes the analog RF, digital circuitry and embedded firmware required for EPC Class 0 and EPC Class 1 operation. The modular design is flexible, and a simple firmware upgrade is all that is re- quired to incorporate future standards like UHF Gen 2. The MPR 6000 leverages the common PCMCIA Type II PC Card™ standard for ease of use. Plug it into any PCMCIA Type II socket and operate it via a simple WJ GUI program. The standard PCMCIA control interface (68-pin paral- lel bus) coupled with a simple but powerful command set allows for fast creation of custom applications. These readers enable a host of reader/programmer solutions including handhelds, printers, smart packaging, material handling and industrial products for today and the future. Product Features Standard 68-Pin PCMCIA Type II PC Card™ Multi Protocol

  • EPC Class 0 (read only)
  • EPC Class 1 (read and program)
  • Class 0+ (read and program)
  • Firmware Upgrade (UHF G2 & others) Multiple Antenna Ports
  • Two Separate Antennas
  • 50 Ohm MMCX Coax Connectors Certified Compliance to FCC Part 15
  • FCC ID: NTTWJMPR6XXX Just plug it in, install it and read tags... Copyright WJ Communications March 2006. Subject to change without notice. All trademarks, trade names, service marks, and logos remain the property of the rightful owners

WJ Communications 401 River Oaks Parkway, San Jose, CA 95134 WWW.WJ.COM Technical Specifications Operating Frequency

  • UHF 902-928 MHz (U.S. ISM)
  • Frequency Hopping Protocol Support
  • 0.5W Transmit Power
  • EPC Class 0 and Class 1
  • Class 0+ Protocol Regulatory Compliance by WJ
  • Part 15 FCC ID: NTTWJMPR6XXX Power Supply
  • 5VDC Nominal
  • 150-250mA Average Current
  • 750mA Peak Current Temperature
  • 0 to 40 C Operating
  • -20 to 70 C Storage Multi-Protocol MPR 6000 RFID Card Copyright WJ Communications March 2006. Subject to change without notice. All trademarks, trade names, service marks, and logos remain the property of the rightful owners