DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Parameter Conditions Min. Typ. Max. Units Input Voltage Range 85 265 VAC 100 370 VDC Input Frequency 47 63 Hz Input Current See Model Selection Guide Inrush Current 115 VAC 30.0 A Pk230 VAC 50.0 Leakage Current 0.5 mA EMI Meets CISPR Pub. 22/FCC Class B EMC Meets EN 55024 Output Parameter Conditions Min. Typ. Max. Units Output Voltage See Model Selection Guide Output Current See Model Selection Guide Output Voltage Accuracy ±2.0 % Output Voltage Adjustment ±10.0 % Line Regulation V IN = Min to Max ±1.0 % Load Regulation IO = 5% to 100% ±1.0 % Ripple (20 MHz), See Note 1 <±0.2% Vout + 40 mV mV P-P Noise, See Note 1 <±0.5% Vout + 50 mV mV P-P Hold-Up Time 115 VAC 10 mSec230 VAC 60 Temperature Coeffi cient ±0.02 %/°C Over Voltage Protection Zener Diode Clamp 120 % of V O Short Circuit Protection, See Note 2 Continuous (Autorecovery) Overload Protection 150 % of I O General Parameter Conditions Min. Typ. Max. Units Isolation Voltage Input to Output 4,000 VACInput to FG 1,500 Output to FG 500 Isolation Resistance 500 VDC 100 M/H9024 EMI/RFI Conducted EN 55022 Level B EMC Compliance Electrostatic Discharge (ESD) EN 61000-4-2 Level B RF Field Susceptibility EN 61000-4-3 Electrical Fast Transients/Bursts On Mains EN 61000-4-4 Level 3 2 kV Surge EN 61000-4-5 Level 3 1kV/2 kV Switching Frequency 100 kHz Environmental Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient -40 +25 +70 °C Storage Temperature Range -50 +85 °C Cooling Free Air Convection (See Derating Curve) Humidity RH, Non-condensing 95 % Physical Case Material Non-Conductive Plastic & Fiberglass (UL94-V0) Weight 10.92 Oz (310g) Reliability Specifi cations Parameter Conditions Min. Typ. Max. Units MTBF MIL HDBK 217F , 25°C, Gnd Benign 130 kHours Safety Standards UL 60950, EN 60950 Safety Approvals UL, cUL; File No. E245422 Single Output, 60W Compact “Power Brick” AC/DC Power Supplies MPM-60PBSeries Electrical Specifi cations Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice. Key Features:
- 60W Output Power
- High Power Density Case
- Universal 85-265 VAC Input
- EN 60950 Approved (UL)
- -40°C to + 70°C Operation
- Meets EN 55022 B
- 4,000 VAC I/O Isolation
- >130 kHour MTBF MicroPower Direct
292 Page Street
Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com www.micropowerdirect.com
(µF) Maximum Output Power (W) Effi ciency (%, Typ)Current (A) Voltage (VDC) Current 115 VAC 230 VAC Max. (A) Min. (%) Derating Curve Mechanical Dimensions MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com www.micropowerdirect.com Notes: 1. Ripple and noise are measured at 20 Mhz bandwidth with a 0.1µ F and a 47 µ F capacitor connected in parallel as close to the unit output terminals as possible. 2. Output short circuit protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 3. Operation at under no load conditions will not damage these units. 4. It is recommended that a fuse be used on the input of a power supply for protection. For the MPM-60PB series, a 4A/250 VAC slow blow should be used. Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.01 (±0.25) Pin Function