DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
7W, Single Output AC/DC Power Supplies Key Features: 7W Output Power Compact 1 x 2 Inch Case Universal 85-264 VAC Input EN 60950 Approved (UL) ErP Directive Compliant Meets EN 55022 B Meets IEC Safety Class II >330 kHour MTBF MPM-07PBSeries Electrical Specifi cations Specifi cations typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice. MicroPower Direct
292 Page Street
Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com www.micropowerdirect.com Input Parameter Conditions Min. Typ. Max. Units Input Voltage Range 85 264 VAC 120 370 VDC Input Frequency 47 440 Hz Input Current See Model Selection Guide Inrush Current 115 VAC 10.0 A Pk230 VAC 20.0 No Load Power Consumption 0.3 W Output Parameter Conditions Min. Typ. Max. Units Output Voltage See Model Selection Guide Output Current See Model Selection Guide Output Voltage Accuracy ±1.0 ±2.0 % Line Regulation VIN = Min to Max ±0.5 ±1.0 % Load Regulation I OUT = 0% to 100% ±0.5 ±1.0 % Hold-Up Time 115 VAC 20
230 VAC 60 mSec
Temperature Coeffi cient ±0.01 ±0.02 %/°C Over Voltage Protection Zener Diode Clamp 120 %V OUT Over Temperature Protection Autorecovery (at 67 °C) 90 °C Short Circuit Protection Continuous (Autorecovery) Overload Protection Foldback, Autorecovery 105 %W General Parameter Conditions Min. Typ. Max. Units Isolation Voltage Input to Output 3,000 VAC Isolation Resistance 500 VDC 100 M Switching Frequency 100 kHz EMI Characteristics Parameter Standard Min. Typ. Max. Units Radiated Emissions EN 55022 Class B Conducted Emissions EN 55022 Class B ESD EN 61000-4-2 Criteria B; ±8 kV Air/±4 kV Contact RS EN 61000-4-3 Criteria A; 10V/m EFT EN 61000-4-4 Criteria B; ±2 kV Surge EN 61000-4-5 Criteria B; ±1 kV CS EN 61000-4-6 Criteria B; 10 Vrms PFM EN 61000-4-8 Criteria A; 30A/m Voltage Dips EN 61000-4-11 Criteria B; 10 mS Environmental Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient -25 +25 +70 °C Storage Temperature Range -40 +85 °C Cooling Free Air Convection (See Derating Curve) Humidity RH, Non-condensing 95 % Physical Case Material Non-Conductive Black Plastic (UL94-V0) Weight 1.55 Oz (44g) Reliability Specifi cations Parameter Conditions Min. Typ. Max. Units MTBF MIL HDBK 217F , 25°C, Gnd Benign 300 kHours Safety Standards EN 60950 Safety Class IEC 60536 Class II ECO Design ErP Directive 2009/125/EC
Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.01 (±0.25) Pin Function
1 AC-Neutral
2 AC-Line
Notes: 1. Load regulation is measured for an output change of 0% to 100% at nominal input line. 2. Operation at no-load will not damage these units. However, they may not meet all specifi cations. 3. Output short circuit protection is provided by a “hiccup mode” circuit. The unit recovers automatically when the fault condition is removed. 4. Output overload protection is provided by a fold back current limit- ing circuit. 5. It is recommended that an external slow blow fuse also be used on the input for protection. See the table above for the correct rating. Model Number Input Output 1 (Vout 1) Effi ciency (%, Typ) Capacitive Load (µF Max) Fuse Rating Slow-Blow (mA) Current (A) Voltage (VDC) Current (A) 115 VAC 230 VAC Max. Min. Derating CurveOther outputs may be available Contact the factory for details at: sales@micropowerdirect.com www.micropowerdirect.com MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com