DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Parameter Conditions Min. Typ. Max. Units Input Voltage Range Universal 85 264 VAC 127 373 VDC Input Frequency 47 63 Hz Input Filter Meets EN 55022 Class B Input Current See Model Selection Guide Inrush Current Cold Start, 115 VAC 20.0 A PkCold Start, 230 VAC 40.0 Safety Ground Leakage Current 264 VAC 0.25 mA Output Parameter Conditions Min. Typ. Max. Units Output Voltage/Current See Model Selection Guide Output Voltage Tolerance See Note 1 ±1.0 % Line Regulation Vin = 100 VAC to 240 VAC ±0.5 % Load Regulation Iout = 10% to 100% ±1.0 % Ripple & Noise (20 MHz) See Note 2 ±1.0 % Hold-Up Time 115 VAC 16 mSec230 VAC 60 Temperature Coeffi cient ±0.05 %/°C Short Circuit Protection Hiccup Mode (Autorecovery) General Parameter Conditions Min. Typ. Max. Units Isolation Voltage Input to Output 3,000 VAC Isolation Resistance 500 VDC 100 M/H9024 Isolation Capacitance 2,200 pF EMI/RFI Conducted EN 55022; EN 61000-3-2, -3 EMC Compliance Electrostatic Discharge (ESD) IEC/EN 61000-4-2, -6, -8, -11 RF Field Susceptibility IEC/EN 61000-4-3 Electrical Fast Transients/Bursts On Mains IEC/EN 61000-4-4 Surge IEC/EN 61000-4-5 Switching Frequency Fixed 67 kHz Environmental Parameter Conditions Min. Typ. Max. Units Operating Temperature Range Ambient 0 +25 +40 °C Storage Temperature Range -20 +85 °C Cooling Free Air Convection (See Derating Curve) Humidity RH, Non-condensing 93 % Physical Weight 2.82 Oz (0.080 kg) Reliability Specifi cations Parameter Conditions Min. Typ. Max. Units MTBF MIL HDBK 217F , 25°C, Gnd Benign 200 kHours Safety Standards UL 60950, EN 60950 Vibration Sinusoidal 50~500 Hz, 3.0 Grms, Period of 10 min each along X, Y & Z Axis Miniature PCB-Mount, 15W, Open Frame AC/DC Power Supplies Key Features:
- 15W Output Power
- Universal 85-264 AC Input
- EN 60950 Approved (UL)
- PCB Mountable
- Meets IEC Safety Class II
- Meets EN 55022 B
- Effi ciency To 83%
- >200 kHour MTBF MPB-15SSeries Electrical Specifi cations Specifi cations typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifi cations subject to change without notice. www.micropowerdirect.com MicroPower Direct
292 Page Street
Stoughton, MA 02072 USA T: (781) 344-8226 F: (781) 344-8481 E: sales@micropowerdirect.com W: www.micropowerdirect.com
Notes: 1. Output voltage tolerance is measured at nominal input and 75% load. 2. For the MPB-15S-03, output ripple is ±50 mV typ. Output ripple is measured at 20 MHz bandwidth using 0.1 µF and 10 µF capacitors connected in parallel as close to the power supply terminals as possible. 3. These units will operate at no load without damage. For most applications however, MPD recommends that a minimum load always be used. Contact the factory for more information. 4. Each unit includes an input fuse (250V/1A). Since this fuse is not fi eld replaceable, it is recommended that an external fuse of the same size be used on the input of the power supply for protection. Notes:
- All dimensions are typical in inches (mm)
- Tolerance x.xx = ±0.02 (±0.50) MicroPower Direct We Power Your Success - For Less! 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Other Models May Be Available. Contact The Factory For Details www.micropowerdirect.com Model Number Input Output Max Output Power (W) Effi ciency (%, Typ) Current (A) Voltage (VDC) Current (A) 115 VAC 230 VAC Rated % Min.