MP1600-A1-RH

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

ES-9805 Rev.5 MODEL Limit Alarms M-PAC MP1600 -1623 Functions & Features

• Accepting AC current and voltage inputs and pro- viding relay contact closure(s) at a preset input level
• Single, latching or dual setpoint • Failsafe opera- tion available • Deadband adjustable from 1 to 100%
• Indicator LED provided Typical Applications
• Annunciator • Various alarm applications MODEL & SUFFIX CODE SELECTION

ORDERING INFORMATION

Specify code number and variables.

• Code number (e.g. MP1600-A6-F/T/V)
• Special input range (For codes AZ & A8) GENERAL SPECIFICATIONS Construction: plug-in Connection: M3.5 screw terminals on base socket Housing material: flame-resistant resin (black) Isolation: input to output to power (non-isolated between I/O with Option V) Zero/span adjustments: ±5% (front) Setpoint adjustments: front accessed three-turn screwdriver, remote dial potentiometer or DC input Deadband adjustments: front accessed single-turn screwdriver; 1 – 100% Front LEDs: red lights turn on at a tripped condition Power ON timer: relays de-energized for approx. 2 seconds after power is turned on. AC INPUT LIMIT ALARM P. 1 / 4 MP16 qq –q –q /q MODEL INPUT TYPE 6 : AC current or voltage RELAY CONTACT OUTPUT 0 : Single (Hi) trip, non-latching 1 : Single (Hi) trip, latching 2 : Dual (Hi/Lo) trip, non-latching SETPOINT CONTROL 0 : Front-accessed three-turn screwdriver adjust. 2 : Remote dial connections (total resistance 1k – 100kΩ ) 3 : DC programmable (0 – 1V) INPUT RANGE Current AA : 0 – 10mA AC AB : 0 – 50mA AC AC : 0 – 100mA AC AD : 0 – 500mA AC AZ : Specify current* *0% input must be 0mA or 0V . POWER INPUT F : 120V AC J : 240V AC R : 24V DC S : 12V DC OPTIONS H : Latching operation for dual trip (162X only); Reset at power off (5 seconds min.) R : Reversed relay sense T : Transmitter output (0 – 1V DC) V : Relay drive voltage output X : Lo-trip sense for single trip; Lo/Lo for dual trip Y : Hi/Hi-trip sense for dual trip (162X only) M•PAC LIMIT ALARM SET 2 SET 1 SET 2DEADBAND SET 1 DEADBAND SPAN ZERO (1.97) 132 (5.20) (3.15) mm (inch) Voltage A1 : 0 – 100mV AC A2 : 0 – 500mV AC A3 : 0 – 1V AC A4 : 0 – 5V AC A5 : 0 – 10V AC A6 : 0 – 120V AC A7 : 0 – 150V AC A8 : Specify voltage*

ES-9805 Rev.5 Specifications subject to change without notice. INPUT & OUTPUT n INPUT Frequency: 40 Hz min., 1 kHz max. with 100% input

• AC Current: 0 – 1A AC; input resistor incorporated Minimum span : 1mA Input resistance Input Input Resistance ≥500mA, <1A : 1 1A : 0.5
• AC Voltage: 0 – 250V AC Minimum span : 50mV Input resistance Input Input Resistance ≥50mV , <5V : 100k ( Ω ) ≥5V : 1M n REMOTE SETPOINT INPUT MP16X2 : potentiometer; any value of 1k – 100k Ω ; excitation 4V MP16X3 : 0 – 1V DC n RELAY CONTACT OUTPUT
• Single/Latching: isolated DPDT relay; de-energized at trip
• Dual: isolated SPDT relay; energized at trip Rating: 120V AC @3A (cosø=1) 30V DC @3A (resistive load) Relay life Electrical: 10 5 cycles Mechanical: 107 cycles For maximum relay life with inductive loads, external protection is recommended. n VOLTAGE OUTPUT (Option V) : 24V DC average; Drives 1.2kΩ or greater coil impedance n TRANSMITTER OUTPUT (Option T) : 0 – 1V DC; 1mA max. (setpoint and process input) INSTALLATION Power input AC : rating ±10%, 50/60 ±2 Hz, approx. 2VA DC : rating ±10% (ripple 10% p-p max.) 80mA at 24V, 160mA at 12V Operating temperature: -5 to +60°C (23 to 140°F) Storage temperature: -20 to +85°C (-5 to +185°F) Operating humidity: 30 to 90% RH (non-condensing) Mounting: surface (DIN rail available for 11-pin base) Dimensions 11-pin base: W50×H80×D132 mm See General Spec. Sheet Figure A. 20-pin base: W80×H101×D136 mm See General Spec. Sheet Figure B. Weight: 400 g (0.88 lbs) PERFORMANCE in percentage of span Repeatability: ±0.2% Temp. coefficient: ±0.05%/°C (±0.027%/°F) Response time: 100 milliseconds, typical Common mode rejection

60 Hz: greater than 120 dB

DC : greater than 140 dB Line voltage effect: ±0.1% over voltage range Insulation resistance: ≥100MΩ with 500V DC Dielectric strength: 1000V AC @1 minute (input to output to power) 2000V AC @1 minute (output to ground) P. 2 / 4

ES-9805 Rev.5P. 3 / 4 BLOCK DIAGRAM

9 AMP

SP.SET DB COM- PAR Z S LATCH RESET MP121X LATCH RESET MP16X2 4 SP POT CCW SP POT W SP POT CW MP16X3 4 MP16X0 4 SP XMTR XMTR COMMON PROC XMTR Option T N.O. COM. N.C. 17 N.O. COM. N.C.10 SP SP Option V RELAY DRIVE RELAY DRIVE INPUT HOT INPUT NEU

4 AMP

SP.SET DB COM- PAR Z S +HOT / 1 –NEU / 3 N.O. COM. N.C. 9 N.O. COM. N.C. Option V RELAY DRIVE RELAY DRIVE n SINGLE / LATCHING OUTPUT

• 11-pin Base •20-pin Base INPUT HOT INPUT NEU

SP.SET DB COM- PAR Z S +HOT / 1 NEU / 3 LO SP POT W MP1622 LO SP POT CW SP POTS CCW HI SP POT W MP1623 4 MP1620 4 8HI SP POT CW 8 8 PROC XMTR LO SP XMTR HI SP XMTR Option T N.O. COM. N.C.19 17 N.O. COM. N.C.12 XMTR COMMON20 LO SP HI SP SP COMMON Option V RELAY DRIVE RELAY DRIVE INPUT HOT INPUT NEU SP.SET DB COM- PAR Z S SP.SET DB COM- PAR +HOT / 1 –NEU / 3 N.O. LOHI HILO COM. N.C. 9 N.O. COM. N.C. Option V RELAY DRIVE RELAY DRIVE RELAY DRIVE RELAY DRIVE RELAY DRIVE RELAY DRIVE n DUAL OUTPUT

• 11-pin Base •20-pin Base SP.SET DB COM- PAR INPUT HOT INPUT NEU +HOT / –NEU /

ES-9805 Rev.5 Specifications subject to change without notice. P. 4 / 4 TERMINAL ASSIGNMENT n SINGLE OUTPUT PIN MP1600 MP1600 MP1602 MP1602 MP1603 MP1603 w/Option T w/Option T w/Option T

1 POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+) POWER (Hot/+)

2 No Connection No Connection No Connection No Connection No Connection No Connection

3 POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–) POWER (Neu/–)

4 INPUT (Hot) No Connection No Connection No Connection No Connection No Connection

5 INPUT (Neu) No Connection SP Pot CCW SP Pot CCW SP – SP –

6 N.O. No Connection SP Pot W SP Pot W SP + SP +

7 COM * No Connection SP Pot CW SP Pot CW No Connection No Connection

8 N.C. * SP Xmtr + No Connection SP Xmtr + No Connection SP Xmtr + 9 N.O. INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot)

10 COM Xmtr Common No Connection Xmtr Common No Connection Xmtr Common

11 N.C. INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu)

12 Proc Xmtr + No Connection Proc Xmtr + No Connection Proc Xmtr +

14 COM * COM * COM * COM * COM *

16 No Connection No Connection No Connection No Connection No Connection

18 COM COM COM COM COM

20 No Connection No Connection No Connection No Connection No Connection

N.O. = Normally Open COM = Common N.C. = Normally Closed Proc = Process Xmtr = Transmitter SP = Setpoint W = Wiper CW = Clockwise CCW = Counterclockwise *Pins used for Option V n LATCHING OUTPUT PIN MP1610 MP1610 MP1612 MP1612 MP1613 MP1613 w/Option T w/Option T w/Option T

4 No Connection No Connection No Connection No Connection No Connection No Connection

5 No Connection No Connection SP Pot CCW SP Pot CCW SP – SP –

6 No Connection No Connection SP Pot W SP Pot W SP + SP +

7 No Connection No Connection SP Pot CW SP Pot CW No Connection No Connection

8 No Connection SP Xmtr + No Connection SP Xmtr + No Connection SP Xmtr +

9 INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot)

10 No Connection Xmtr Common No Connection Xmtr Common No Connection Xmtr Common

11 INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu)

12 No Connection Proc Xmtr + No Connection Proc Xmtr + No Connection Proc Xmtr +

14 COM * COM * COM * COM * COM * COM *

16 Latch Reset Latch Reset Latch Reset Latch Reset Latch Reset Latch Reset

18 COM COM COM COM COM COM

20 Latch Reset Latch Reset Latch Reset Latch Reset Latch Reset Latch Reset

N.O. = Normally Open COM = Common N.C. = Normally Closed Proc = Process Xmtr = Transmitter SP = Setpoint W = Wiper CW = Clockwise CCW = Counterclockwise *Pins used for Option V n DUAL OUTPUT PIN MP1620 MP1620 MP1622 MP1622 MP1623 MP1623 w/Option T w/Option T w/Option T

4 INPUT (Hot) No Connection Lo SP Pot CW Lo SP Pot CW No Connection No Connection

5 INPUT (Neu) No Connection Lo SP Pot W Lo SP Pot W Lo SP + Lo SP +

6 N.O. No Connection SP Pots CCW SP Pots CCW SP Common SP Common

7 COM * ␣␣␣␣␣H i S e t N o Connection Hi SP Pot W Hi SP Pot W Hi SP + Hi SP +

8 N.C. * No Connection Hi SP Pot CW Hi SP Pot CW No Connection No Connection 9 N.O. INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot) INPUT (Hot)

10 COM * ␣␣␣␣ L o S e tProc Xmtr + No Connection Proc Xmtr + No Connection Proc Xmtr +

11 N.C. * INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu) INPUT (Neu)

12 Lo SP Xmtr + No Connection Lo SP Xmtr + No Connection Lo SP Xmtr +

16 Hi SP Xmtr + No Connection Hi SP Xmtr + No Connection Hi SP Xmtr +

20 Xmtr Common No Connection Xmtr Common No Connection Xmtr Common

N.O. = Normally Open COM = Common N.C. = Normally Closed Proc = Process Xmtr = Transmitter SP = Setpoint W = Wiper CW = Clockwise CCW = Counterclockwise *Pins used for Option V 20-pin: 11-pin: Hi Set = 7(+) - 8(–)