MKRBWT-00-0000-0N0HG227H

MK-R2 CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp ® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE .Com/XLAmp CLD-DS76 Rev 2e Cree® XLamp® MK-R2 LEDs PRoDuCt DEsCRiPtion The XLamp ® MK-R2 easyWhite ® LeD builds on the breakthrough performance of the original MK-R by enabling high-voltage driver solutions while providing a small, uniform, single point source for precise optical control. The MK-R2 shares the same mechanical footprint as the original MK -R, providing customers with a seamless upgrade path and shortening the LeD luminaire and retrofit lamp design cycle. MK-R2 LeDs are designed for high-output, directional lighting applications and are the ideal replacement for lighting applications that currently use inefficient halogen lamps. MK-R2 LeDs are optimized for use in track, accent, lamp retrofit, downlighting and other applications where color quality, consistency and optical control are required.

FEAtuREs

• Available in 4-step and 2-step EasyWhite bins at 2700 K & 3000 K, 80-CRI minimum
• Maximum drive current: 420 mA
• Low thermal resistance: 1.7 °C/W
• Maximum junction temperature: 150 °C
• Binned at 85 °C
• Viewing angle: 120°
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J-STD-020C
• electrically neutral thermal path
• RoHS and REACh compliant
• UL ® recognized component (E349212) tAbLE oF ContEnts Flux Characteristics, Standard Order Relative Flux vs. Junction Temperature .3 Relative Chromaticity vs. Temperature ..5 Cree easyWhite® Bins Plotted on the

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED ChARACtERistiCs Characteristics unit Minimum typical Maximum Thermal resistance, junction to solder point °C/W 1.7 Viewing angle - full width half maximum (FWHM) degrees 120 Temperature coefficient of voltage mV/°C -28 ESD withstand voltage (HBM per Mil-Std-883D) v 8000 DC forward current mA 420 Reverse current mA 100 Forward voltage (@ 233 mA, 85 °C) v 36 Forward voltage (@ 233 mA, 25 °C) v 42 LeD junction temperature °C 150 FLuX ChARACtERistiCs, st AnDARD oRDER CoDEs AnD bins ( iF = 233 mA, tJ = 85 °C) The following tables provide order codes for XLamp MK-R2 easyWhite LeDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 8). Color CCt Range Minimum Luminous Flux 2-step 4-step Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* Chromaticity Region order Code Chromaticity Region order Code 80-CRI easyWhite 3000 K G4 840 961 30H MKRBWT-00-0000-0N0HG430H 30F MKRBWT-00-0000-0N0HG430F G2 780 893 MKRBWT-00-0000-0N0HG230H MKRBWT-00-0000-0N0HG230F 2700 K G2 780 893 27H MKRBWT-00-0000-0N0HG227H 27F MKRBWT-00-0000-0N0HG227F F4 730 847 MKRBWT-00-0000-0N0HF427H MKRBWT-00-0000-0N0HF427F Notes:

• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 10).
• Minimum CRI for 80-CRI White is 80. * Flux values @ 25 °C are calculated and for reference only.

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED RELAtivE sPEC tRAL PowER DistRibution RELAtivE FLuX vs. JunC tion tEMPERA tuRE (iF = 233 mA) Relative Spectral Power 100 380 430 480 530 580 630 680 730 780 Relative Radiant Power (%) Wavelength (nm) Warm White Relative Flux Output vs. Junction Temperature 100 120 25 50 75 100 125 150 Relative Luminous Flux (%) Junction Temperature (ºC)

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED ELEC tRiCAL ChARACtERistiCs ( tJ = 85 °C) RELAtivE FLuX vs. CuRREnt ( tJ = 85 °C) Electrical Characteristics (Tj = 85ºC) 100 150 200 250 300 350 400 450 Forward Current (mA) Forward Voltage (V) Relative Intensity vs. Current (Tj = 85ºC) 120 150 180 0 50 100 150 200 250 300 350 400 450 Relative Luminous Flux (%) Forward Current (mA)

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED RELAtivE ChRo MAtiCity vs. CuRREnt - wARM whitE (tJ = 85 °C) RELAtivE ChRo MAtiCity vs. tEMPERA tuRE - wARM whitE (iF = 233 mA) Relative Chromaticity Vs. Current - Warm White -0.006 -0.005 -0.004 -0.003 -0.002 -0.001 0.000 0.001 0.002 0.003 0.004 0.005 0 50 100 150 200 250 300 350 400 450 Current (mA) ΔCCx ΔCCy Relative Chromaticity Vs. Temperature - Warm White ΔCCx -0.006 -0.005 -0.004 -0.003 -0.002 -0.001 0.000 0.001 0.002 0.003 0.004 0.005 0 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED tyPiCAL sPAtiAL DistRibution thERMAL DEsiGn The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Typical Spatial Radiation Pattern 100 -90 -70 -50 -30 -10 10 30 50 70 90 Relative Luminous Intensity (%) Angle (º) Thermal Design 100 150 200 250 300 350 400 450 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 2°C/W Rj-a = 4°C/W Rj-a = 6°C/W Rj-a = 8°C/W

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED PERFo RMAnCE GRouPs - bRiGhtnEss ( iF = 233 mA, tJ = 85 °C) XLamp MK-R2 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Minimum Luminous Flux Maximum Luminous Flux D2 510 550 D4 550 590 e2 590 635 e4 635 680 F2 680 730 F4 730 780 G2 780 840 G4 840 900 H2 900 970 H4 970 1040 J2 1040 1120 J4 1120 1200 K2 1200 1290 PERFo RMAnCE GRouPs - ChRo MAtiCity ( tJ = 85 °C) XLamp MK-R2 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. Easywhite Color temperatures – 4-step Code CCt x y 30F 3000 K 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27F 2700 K 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 Easywhite Color temperatures – 2-step Code CCt x y 30H 3000 K 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27H 2700 K 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED CREE EAsy whitE ® bins PL ottED on thE 1931 CiE Co LoR sPACE (tJ = 85 °C) bin AnD oRDER CoDE FoRMAts Bin codes and order codes are configured as follows. order Code bin Code SSSCCC-HH-HHHH-GHKLNNNNN Series = MKR Internal code Forward voltage class N: Default (36 V) CRI specification H: 80-CRI minimum Kit code Internal code Color BWT = White SSSCCC-E-DDD-MM-HK-L-PP Series = MKR Internal code Luminous flux group Internal code CRI specification H: 80-CRI minimum Forward voltage class N: Default (36 V) Chromaticity bin Color BWT = White

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED REFLow so LDERinG ChARACtERistiCs In testing, Cree has found XLamp MK-R2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. IPC/JEDEC J-STD-020C TP TL Temperature Time t 25˚C to Peak Preheat ts tS tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED notEs Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LeD junction temperature. Moisture sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LeDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MK-R2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP . Rohs Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request.

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED uL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. vision Advisory WARNING: Do not look at an exposed lamp in operation. eye injury can result. For more information about LeDs and eye safety, please refer to the LeD eye Safety application note. notEs - ContinuED

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED MECh AniCAL DiMEnsions Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm unless otherwise indicated. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 7.00 7.00 .73 4.08 R3.25 6.70 6.76 REF. 6.76 6.70 3.90 .70.70 6.76 6.70 1.24 1.29 .25 .70 .25 1.29 6.76 REF. 6.70 REF. 6.70 6.76 .70 .70 3.90 .70 1/111.000 E2610-00031 MKR Marketing Spec 11/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D B VIEWS SHOW LATEST REVISION DC 8/5/13 D NOTCH IS ADDED TO BACKSIDE DC 7/7/14 E UPDATED ALL VIEWS DC 6/19/15 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENINGRECOMMENDED PCB SOLDER PAD PRIMARY ALTERNATIVE ALTERNATIVE side viewtop view Alternate bottom view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 7.00 7.00 .73 4.08 R3.25 6.70 6.76 REF. 6.76 6.70 3.90 .70.70 6.76 6.70 1.24 1.29 .25 .70 .25 1.29 6.76 REF. 6.70 REF. 6.70 6.76 .70 .70 3.90 .70 1/111.000 E2610-00031 MKR Marketing Spec 11/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D B VIEWS SHOW LATEST REVISION DC 8/5/13 D NOTCH IS ADDED TO BACKSIDE DC 7/7/14 E UPDATED ALL VIEWS DC 6/19/15 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENINGRECOMMENDED PCB SOLDER PAD PRIMARY ALTERNATIVE ALTERNATIVE bottom view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 7.00 7.00 .73 4.08 R3.25 6.70 6.76 REF. 6.76 6.70 3.90 .70.70 6.76 6.70 1.24 1.29 .25 .70 .25 1.29 6.76 REF. 6.70 REF. 6.70 6.76 .70 .70 3.90 .70 1/111.000 E2610-00031 MKR Marketing Spec 11/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D B VIEWS SHOW LATEST REVISION DC 8/5/13 D NOTCH IS ADDED TO BACKSIDE DC 7/7/14 E UPDATED ALL VIEWS DC 6/19/15 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENINGRECOMMENDED PCB SOLDER PAD PRIMARY ALTERNATIVE ALTERNATIVE Anode Alternate bottom view SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 7.00 7.00 .73 4.08 R3.25 6.70 6.76 REF. 6.76 6.70 3.90 .70.70 6.76 6.70 1.24 1.29 .25 .70 .25 1.29 6.76 REF. 6.70 REF. 6.70 6.76 .70 .70 3.90 .70 1/111.000 E2610-00031 MKR Marketing Spec 11/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D B VIEWS SHOW LATEST REVISION DC 8/5/13 D NOTCH IS ADDED TO BACKSIDE DC 7/7/14 E UPDATED ALL VIEWS DC 6/19/15 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENINGRECOMMENDED PCB SOLDER PAD PRIMARY ALTERNATIVE ALTERNATIVE AnodeAnode Recommended PCb solder Pad SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 7.00 7.00 .73 4.08 R3.25 6.70 6.76 REF. 6.76 6.70 3.90 .70.70 6.76 6.70 1.24 1.29 .25 .70 .25 1.29 6.76 REF. 6.70 REF. 6.70 6.76 .70 .70 3.90 .70 1/111.000 E2610-00031 MKR Marketing Spec 11/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D B VIEWS SHOW LATEST REVISION DC 8/5/13 D NOTCH IS ADDED TO BACKSIDE DC 7/7/14 E UPDATED ALL VIEWS DC 6/19/15 RECOMMENDED STENCIL PATTERN SHADED AREA IS OPENINGRECOMMENDED PCB SOLDER PAD PRIMARY ALTERNATIVE ALTERNATIVE Recommended stencil Pattern (Shaded Area Is Open)

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED tAPE AnD REEL All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions in mm. SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION X° ± .5 ° .XXX ± .010 .XX ± .03 .X ± .06 FOR SHEET METAL PARTS ONLY .XX ± .01 .XXX ± .005 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTANED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE SURFACE FINISH: 63 330 +.25 -.75 12.4 +1.0 -.5 MEASURED AT EDGE 16.4 +0.2 MEASURED AT HUB 12.4 +.2 MEASURED AT HUB ±.213.1 1.9±.4 ±.421 60° 60° 1/10.500 A2400-00009 REEL, 13" X 12MM, 3 PIECE SNAP ANTI-STATIC HIPS ---- ---- 09/29/09D. CRONIN 2400-00009 INDEX QTY ITEM COMMENTS 1 1 2400-00009-CORE 2 2 2400-00009-REEL REVISONS REV DESCRIPTION BY DATE APP'D SIZE TITLE OF REV. SHEET C DRAWING NO. DATE DATE DATE CHECK FINAL PROTECTIVE FINISH MATERIAL APPROVED DRAWN BY THIRD ANGLE PROJECTION SCALE A B C D 123456 6 5 4 3 2 1 A B C D Phone (919) 313-5300 Fax (919) 313-5558 Durham, N.C 27703 UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY AND CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION OF CREE INC. NOTICE X° ± .5 ° .XXX ± .25 .XX ± .75 .X ± 1.5 FOR SHEET METAL PARTS ONLY .XX ± .25 .XXX ± .125 X° ± .5 ° UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: SURFACE FINISH: 1.6 Trailer 180mm (min) of empty pockets sealed with tape (15 pockets min.) Loaded Pockets (1000 Lamps) 12±.1 4.31 +.3 -.0 1.75 ±.104±.10 Leader 420mm (min) of empty pockets sealed with tape (35 pockets min.) 7.4 0.36 "13 13mm 1/13.000 A2402-00025 MKR LOADING SPEC ---- ---- 12/7/12D. CRONIN REVISONS REV DESCRIPTION BY DATE APP'D A Initial Release DC 12/7/12 END START User Feed Direction CATHODE SIDE ANODE SIDE User Feed Direction 1.5± .1

Copyright © 2013-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree ®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. XLamp ® m K-R2 LED PACKAGinG Label with Cree Bin Code, Qty, Lot # Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Dessicant (inside bag) Humidity Indicator Card (inside bag) Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Label with Cree Bin Code, Quantity, Reel ID Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Unpackaged Reel Packaged Reel Boxed Reel