MIP VIGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

 Frequency bandwidth up to 250 MHz  Integrated fan  Compatible with optical accessories Specification (Ta = 20°C) Parameter Typical value Conditions, remarks Low cut-off frequency flo, Hz DC, 10, 100, 1k, 10k High cut-off frequency fhi, Hz 100k, 1M, 10M, 100M, 250M Transimpedance Ki, V/A up to 200k fixed Output impedance Rout, Ω 50 Output voltage swing Vout, V ±10 fhi ≤ 1 MHz, RL = 1 MΩ*)

1 MHz < fhi ≤ 10 MHz, RL = 1 MΩ*)

10 MHz < fhi ≤ 250 MHz, RL = 50 Ω*)

Output voltage offset Voff, mV max ±20**) Power supply voltage Vsup, V ±15 fhi ≤ 1 MHz fhi > 1 MHz Power supply current Isup, mA max ±50 Ambient operating temperature Ta, °C 10 to 30 Signal output socket SMA Power supply and TEC control socket LEMO (female) ECG.0B.309.CLN Mounting hole M4 Fan yes *) RL – load resistance **) Measured with equivalent resistor at the input instead of the detector, it is to avoid the e nvironmental thermal radiation impact. Types of VIGO detectors that can be integrated with MIP preamplifier  Photoconductive PC-2TE, PC-3TE, PC-4TE  Phtoconductive optically immersed PCI-2TE, PCI-3TE, PCI-4TE  Photovoltaic PV-2TE, PVA-2TE, PV-3TE, PV-4TE  Photovoltaic optically immersed PVI-2TE, PVIA-2TE, PVI-3TE, PVI-4TE  Photovoltaic multiple junction PVM-2TE  Photovoltaic multiple junction optically immersed PVMI-2TE, PVMI-3TE, PVMI-4TE Code description Type flo, Hz fhi, Hz MIP – DC 100 10k 100k 10M 100M 250M Power supply and TEC control socket LEMO (female) ECG.0B.309.CLN Function Symbol Pin number Fan (+) FAN+ 1 Thermistor output (2) TH2 2 TEC supply input (–) TEC– 3 Power supply input (–) –Vsup 4 Ground GND 5 Power supply input (+) +Vsup 6 TEC supply input (+) TEC+ 7 Thermistor output (1) TH1 8 Data pin DATA 9 Included accessories  SMA-BNC, LEMO-DB9 cables Dedicated accessories  PTCC-01-BAS TEC controller + USB: TypeA-MicroB cable + AC adaptor  PTCC-01-ADV TEC controller + USB: TypeA-MicroB cable + AC adaptor  PTCC-01-OEM TEC controller + USB: TypeA-MicroB, KK2-POWER cables  OTA optical threaded adapter  DRB-2 base mounting system

MIP series preamplifiers datasheet P a g e | 2 18/03/2021 VIGO System S.A. reserves the right to change these specifications at any time without notification. www.vigo.com.pl

MIP series preamplifiers datasheet P a g e | 3 18/03/2021 VIGO System S.A. reserves the right to change these specifications at any time without notification. www.vigo.com.pl Mechanical layout, mm Notes: 1. TO8 detector dimensions in the ”TO8 technical drawing”.