MGF30

COSEL CO., LTD.

DC-DC Converters PCB Mount Type January 31, 2022

Manufacturer: COSEL CO., LTD.

Document: 28 Pages / 3Mb

Request Quote Download Datasheet Read online HTML view

More from COSEL CO., LTD. Browse M parts

Online Datasheet

Read MGF30 online.

MGS15 COSEL | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 28

Technical content

Industry Standard SIP6 (MG1R5/MG3), SIP8 (MG6/MG10), 1"X1" (MG15/MG40), 1"X2" (MG30/MG80) Wide input range DC4.5-13V/DC9-36V/DC18-76V (MGFS/MGFW) Ultra wide input range DC6-60V(MGXS/MGXW) High efficiency by synchronized rectification circuit (MGS10/MGFS10/MGS15/MGFS15/MGS30/MGFS30/MGFS40/MGFW40/MGFS80/MGFW80) 6 sided shield (MG15/MG30/MG40/MG80) I/O isolation voltage DC1,500V (1 minute) Built-in overcurrent protection circuits (recovers automatically) Built-in overvoltage protection circuits (MG30/MG40/MG80) Built-in remote ON/OFF (MG6/MG10/MG15/MG30/MG40/MG80) Output voltage adjustability by external variable resistor (MGS15/MGFS15/MGS30/MGFS30/MGFS40/MGFS80) High reliability : not built-in aluminum and tantalum electrolytic capacitor CE marking Low Voltage Directive RoHS Directive Safety agency approvals UL60950-1, C-UL, EN62368-1 (MG1R5/MG3/MG6/MG10/MG15/MG30) UL62368-1, C-UL, EN62368-1 (MG40/MG80) 10-year warranty Refer to the instruction manual DC-DC Converters PCB Mount Type Low Profile Isolated Safety Approvals OCP OVP Remote ON/OFF Wide 4 :1 input Ultra wide 10:1 input 10:1 January 31, 2022

DC-DC Converters PCB Mount Type MG S 15 24 05 -O

Ordering information

1 Series name

2 Single output

3 Output wattage

4 Input voltage

5 Output voltage

6 Optional

G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R 1 2 3 4 5 6 MODEL MGS15123R3 MGS151205 MGS151212 MGS151215 MGS15243R3 MGS152405 MGS152412 MGS152415 MAX OUTPUT WATTAGE[W] 13.2 15 15.6 15 13.2 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 4 3 1.3 1 SPECIFICATIONS MODEL MGS15123R3 MGS151205 MGS151212 MGS151215 MGS15243R3 MGS152405 MGS152412 MGS152415 INPUT VOLTAGE[V] DC9 - 18 DC18 - 36 EFFICIENCY[%] *2 86typ 87typ 87typ 88typ 87typ 89typ 89typ 89typ OUTPUT VOLTAGE[V] 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 4 3 1.3 1 LINE REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) Available to adjust ±10% by external variable resister PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGS15483R3 MGS154805 MGS154812 MGS154815 MAX OUTPUT WATTAGE[W] 13.2 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 SPECIFICATIONS MODEL MGS15483R3 MGS154805 MGS154812 MGS154815 INPUT VOLTAGE[V] DC36 - 76 CURRENT[A] *2 0.32typ 0.35typ 0.36typ 0.35typ EFFICIENCY[%] *2 87typ 89typ 90typ 90typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1 MGW15xx05/MGW15xx12/MGW15xx15 is a vailable as single output, +10V/+24V/+30V Rated input 12V , 24V or 48V DC lo=100% Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. 1±0.1f 3.5 9.9 6-f1.5 Name Plate Unit : 0.1inch Dimension : mm ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 20g max +Vin -Vin RC +Vout -Vout TRM 10.16 25.4 20.32 2.54 25.4 5.087.62 10.16 Case Bottom Cover [0.8] [1.0] [0.1] [0.3] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MG W 15 24 05 -O

2 Dual output

G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R 1 2 3 4 5 6 MODEL MGW151205 MGW151212 MGW151215 MGW152405 MGW152412 MGW152415 MGW154805 MGW154812 MGW154815 MAX OUTPUT WATTAGE[W] 15 15.6 15 15 15.6 15 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 SPECIFICATIONS MODEL MGW151205 MGW151212 MGW151215 MGW152405 MGW152412 MGW152415 MGW154805 MGW154812 MGW154815 INPUT VOLTAGE[V] DC9 - 18 DC18 - 36 DC36 - 76 EFFICIENCY[%] *2 84typ 87typ 88typ 84typ 88typ 89typ 84typ 89typ 89typ OUTPUT LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max 40max 60max 75max LOAD REGULATION[mV] *3 500max *5 600max 750max 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max 250max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max 120max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 150max 180max 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 80max 240max 290max DRIFT[mV] *7 50max 50max 60max 50max 50max 60max 50max 50max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1 Single output +10V , +24V, +30V with no use of COM. Rated input 12V , 24V or 48V lo=100% An output load is 100%, the other load is 5% to 100%. An output load is 100%, the other load is 20% to 100%. Ref er to the instruction manual 11. Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. January 31, 2022

(TOP VIEW) ¶Recommended Pad and Hole dia. 1±0.1f 3.5 9.9 6-f1.5 Name Plate ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 20g max Unit : 0.1inch Dimension : mm [0.8] [1.0] [0.1] [0.3] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] +Vin -Vin RC +Vout -Vout COM 10.16 25.4 20.32 2.54 25.4 5.087.62 10.16 Case Bottom Cover January 31, 2022

DC-DC Converters PCB Mount Type MG S 30 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R 1 2 3 4 5 6 MODEL MGS30123R3 MGS301205 MGS301212 MGS301215 MGS30243R3 MGS302405 MGS302412 MGS302415 MAX OUTPUT WATTAGE[W] 26.4 30 30 30 26.4 30 30 30 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 8 6 2.5 2 SPECIFICATIONS MODEL MGS30123R3 MGS301205 MGS301212 MGS301215 MGS30243R3 MGS302405 MGS302412 MGS302415 INPUT VOLTAGE[V] DC9 - 18 DC18 - 36 EFFICIENCY[%] *2 90typ 91typ 90typ 90typ 91typ 92typ 92typ 92typ OUTPUT VOLTAGE[V] 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 8 6 2.5 2 LINE REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGS30483R3 MGS304805 MGS304812 MGS304815 MAX OUTPUT WATTAGE[W] 26.4 30 30 30 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 SPECIFICATIONS MODEL MGS30483R3 MGS304805 MGS304812 MGS304815 INPUT VOLTAGE[V] DC36 - 76 CURRENT[A] *2 0.61typ 0.68typ 0.68typ 0.68typ EFFICIENCY[%] *2 91typ 92typ 92typ 92typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1 MGW30xx05/MGW30xx12/MGW30xx15 is a vailable as single output, +10V/+24V/+30V Rated input 12V , 24V or 48V DC lo=100% Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 40g max 9.93.51±0.1f 6-f1.5 Name Plate +Vout TRM -Vout +Vin -Vin RC 10.1610.16 5.0810.165.08 25.4 45.72 50.8 Unit : 0.1inch Dimension : mm Case Bottom Cover [1.8] [2.0] [0.2] [0.4] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MG W 30 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGW301205 MGW301212 MGW301215 MGW302405 MGW302412 MGW302415 MGW304805 MGW304812 MGW304815 MAX OUTPUT WATTAGE[W] 25 30 30 25 30 30 25 30 30 DC OUTPUT VOLTAGE[V] *1 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 SPECIFICATIONS MODEL MGW301205 MGW301212 MGW301215 MGW302405 MGW302412 MGW302415 MGW304805 MGW304812 MGW304815 INPUT VOLTAGE[V] DC9 - 18 DC18 - 36 DC36 - 76 EFFICIENCY[%] *2 86typ 90typ 90typ 87typ 91typ 91typ 87typ 90typ 90typ OUTPUT LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max 40max 60max 75max LOAD REGULATION[mV] *3 500max *5 600max 750max 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max 250max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max 120max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 150max 180max 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 80max 240max 290max DRIFT[mV] *7 50max 50max 60max 50max 50max 60max 50max 50max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating (Total of +V and -V) REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1 Single output +10V , +24V, +30V with no use of COM. Rated input 12V , 24V or 48V DC lo=100% Symmetr ical loading from 5% to 100%. Symmetr ical loading from 20% to 100%. Ref er to the instruction manual 11. Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC12V, DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. January 31, 2022

(TOP VIEW) ¶Recommended Pad and Hole dia. ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 40g max 9.93.51±0.1f 6-f1.5 Name Plate +Vout COM -Vout +Vin -Vin RC 10.1610.16 5.0810.165.08 25.4 45.72 50.8 Unit : 0.1inch Dimension : mm Case Bottom Cover [1.8] [2.0] [0.2] [0.4] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MGF S 15 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFS15243R3 MGFS152405 MGFS152412 MGFS152415 MAX OUTPUT WATTAGE[W] 13.2 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 SPECIFICATIONS MODEL MGFS15243R3 MGFS152405 MGFS152412 MGFS152415 INPUT VOLTAGE[V] DC9 - 36 CURRENT[A] *2 0.63typ 0.71typ 0.73typ 0.70typ EFFICIENCY[%] *2 87typ 88typ 89typ 89typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGFS15483R3 MGFS154805 MGFS154812 MGFS154815 MAX OUTPUT WATTAGE[W] 13.2 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 SPECIFICATIONS MODEL MGFS15483R3 MGFS154805 MGFS154812 MGFS154815 INPUT VOLTAGE[V] DC18 - 76 CURRENT[A] *2 0.32typ 0.36typ 0.37typ 0.35typ EFFICIENCY[%] *2 87typ 88typ 88typ 89typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 4 3 1.3 1 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1 MGFW15xx05/MGFW15xx12/MGFW15xx15 is a vailable as single output, +10V/+24V/+30V Rated input 12V , 24V or 48V DC lo=100% Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. 1±0.1f 3.5 9.9 6-f1.5 Name Plate Unit : 0.1inch Dimension : mm ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 20g max +Vin -Vin RC +Vout -Vout TRM 10.16 25.4 20.32 2.54 25.4 5.087.62 10.16 Case Bottom Cover [0.8] [1.0] [0.1] [0.3] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MGF W 15 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 MAX OUTPUT WATTAGE[W] 15 15.6 15 15 15.6 15 DC OUTPUT VOLTAGE[V] *1 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 SPECIFICATIONS MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 INPUT VOLTAGE[V] DC9 - 36 DC18 - 76 EFFICIENCY[%] *2 84typ 88typ 89typ 84typ 87typ 88typ OUTPUT LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max LOAD REGULATION[mV] *3 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max DRIFT[mV] *7 50max 50max 60max 50max 50max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1 Single output +10V , +24V, +30V with no use of COM. Rated input 12V , 24V or 48V DC lo=100% Symmetr ical loading from 5% to 100%. Symmetr ical loading from 20% to 100%. Ref er to the instruction manual 11. Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. January 31, 2022

DC-DC Converters PCB Mount Type MGF S 30 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFS30243R3 MGFS302405 MGFS302412 MGFS302415 MAX OUTPUT WATTAGE[W] 24.75 30 30 30 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 7.5 6 2.5 2 SPECIFICATIONS MODEL MGFS30243R3 MGFS302405 MGFS302412 MGFS302415 INPUT VOLTAGE[V] DC9 - 36 CURRENT[A] *2 1.16typ 1.39typ 1.40typ 1.40typ EFFICIENCY[%] *2 89typ 90typ 89typ 89typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 7.5 6 2.5 2 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGFS30483R3 MGFS304805 MGFS304812 MGFS304815 MAX OUTPUT WATTAGE[W] 24.75 30 30 30 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 7.5 6 2.5 2 SPECIFICATIONS MODEL MGFS30483R3 MGFS304805 MGFS304812 MGFS304815 INPUT VOLTAGE[V] DC18 - 76 CURRENT[A] *2 0.58typ 0.70typ 0.70typ 0.70typ EFFICIENCY[%] *2 89typ 90typ 89typ 89typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 7.5 6 2.5 2 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1 MGFW30xx05/MGFW30xx12/MGFW30xx15 is a vailable as single output, +10V/+24V/+30V Rated input 12V , 24V or 48V DC lo=100% Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 40g max 9.93.51±0.1f 6-f1.5 Name Plate +Vout TRM -Vout +Vin -Vin RC 10.1610.16 5.0810.165.08 25.4 45.72 50.8 Unit : 0.1inch Dimension : mm Case Bottom Cover [1.8] [2.0] [0.2] [0.4] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MGF W 30 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFW302405 MGFW302412 MGFW302415 MGFW304805 MGFW304812 MGFW304815 MAX OUTPUT WATTAGE[W] 20 30 30 20 30 30 DC OUTPUT VOLTAGE[V] *1 ±5 or +10 ±12 or +24 ±15 or +30 ±5 or +10 ±12 or +24 ±15 or +30 CURRENT[A] 2 1.25 1 2 1.25 1 SPECIFICATIONS MODEL MGFW302405 MGFW302412 MGFW302415 MGFW304805 MGFW304812 MGFW304815 INPUT VOLTAGE[V] DC9 - 36 DC18 - 76 EFFICIENCY[%] *2 85typ 88typ 87typ 85typ 88typ 87typ OUTPUT CURRENT[A] 2 1.25 1 2 1.25 1 LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max LOAD REGULATION[mV] *3 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max DRIFT[mV] *7 50max 50max 60max 50max 50max 60max START-UP TIME[ms] 30max (Minimum input, Io=100%) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Works over 120 to 160% of rating (Total of +V and -V) REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1 Single output +10V , +24V, +30V with no use of COM. Rated input 12V , 24V or 48V DC lo=100% Symmetr ical loading from 5% to 100%. Symmetr ical loading from 20% to 100%. Ref er to the instruction manual 11. Ripple and Ripple Noise is measured b y using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. P arallel operation with other model is not possible. January 31, 2022

DC-DC Converters PCB Mount Type MGF S 40 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFS40053R3 MGFS400505 MGFS400512 MGFS400515 MGFS40243R3 MGFS402405 MGFS402412 MGFS402415 MAX OUTPUT WATTAGE[W] 26.4 30 30 30 33 40 40.8 40.5 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 10 8 3.4 2.7 SPECIFICATIONS MODEL MGFS40053R3 MGFS400505 MGFS400512 MGFS400515 MGFS40243R3 MGFS402405 MGFS402412 MGFS402415 INPUT VOLTAGE[V] DC4.5 - 13 (Surge Voltage 15V, 100ms max) DC9 - 36 (Surge Voltage 50V, 100ms max) EFFICIENCY[%] *2 85typ 87typ 87typ 88typ 89typ 91typ 92typ 92typ OUTPUT VOLTAGE[V] 3.3 5 12 15 3.3 5 12 15 CURRENT[A] 8 6 2.5 2 10 8 3.4 2.7 LINE REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGFS40483R3 MGFS404805 MGFS404812 MGFS404815 MAX OUTPUT WATTAGE[W] 33 40 40.8 40.5 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 10 8 3.4 2.7 SPECIFICATIONS MODEL MGFS40483R3 MGFS404805 MGFS404812 MGFS404815 INPUT VOLTAGE[V] DC18 - 76 (Surge Voltage 100V, 100ms max) CURRENT[A] *2 0.77typ 0.92typ 0.92typ 0.92typ EFFICIENCY[%] *2 89typ 91typ 92typ 92typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 10 8 3.4 2.7 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 13.2max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL62368-1, C-UL(CSA62368-1), EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm (WXHXD) / 30g max COOLING METHOD Convection/Forced air *1 MGFW40xx12/MGFW40xx15 is a vailable as single output +24V/+30V Rated input v oltage (DC5V, DC24V, DC48V) Io=100% Riple and Ripple Noise is measured b y using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope) Dr ift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C Rated input v oltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature at 25C P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. 1±0.1f 3.5 9.9 6-f1.5 Name Plate Unit : 0.1inch Dimension : mm ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 30g max +Vin -Vin RC +Vout -Vout TRM 10.16 25.4 20.32 2.54 25.4 5.087.62 10.16 Case Bottom Cover [0.8] [1.0] [0.1] [0.3] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MGF W 40 24 12 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815 MAX OUTPUT WATTAGE[W] 31.2 30 40.8 42 40.8 42 DC OUTPUT VOLTAGE[V] *1 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 SPECIFICATIONS MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815 INPUT VOLTAGE[V] DC4.5 - 13 (Surge Voltage 15V, 100ms max) DC9 - 36 (Surge Voltage 50V, 100ms max) DC18 - 76 (Surge Voltage 100V, 100ms max) EFFICIENCY[%] *2 86typ 87typ 91typ 91typ 91typ 91typ OUTPUT LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max LOAD REGULATION[mV] *3 600max 750max 600max 750max 600max 750max *4 480max 600max 480max 600max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max TEMPERATURE REGULATION[mV] -20 to +60C 150max 180max 150max 180max 150max 180max -40 to +60C 240max 290max 240max 290max 240max 290max DRIFT[mV] *6 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating (Total of +Vo and -Vo) REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL62368-1, C-UL (CSA62368-1), EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X25.4mm (WXHXD) / 30g max COOLING METHOD Convection/Forced air *1 Single output +24V/+30V with no use of COM Rated input v oltage(DC5V , DC24V, DC48V) Io=100% Symmetr ical loading from 0% to 100% Symmetr ical loading from 20% to 100% Riple and Ripple Noise is measured b y using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope) Dr ift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C *7 Rated input v oltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature at 25C P arallel operation with other model is not possible. January 31, 2022

(TOP VIEW) ¶Recommended Pad and Hole dia. 1±0.1f 3.5 9.9 6-f1.5 Name Plate ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 30g max Unit : 0.1inch Dimension : mm [0.8] [1.0] [0.1] [0.3] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] +Vin -Vin RC +Vout -Vout COM 10.16 25.4 20.32 2.54 25.4 5.087.62 10.16 Case Bottom Cover January 31, 2022

DC-DC Converters PCB Mount Type MGF S 80 24 05 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFS80243R3 MGFS802405 MGFS802412 MGFS802415 MAX OUTPUT WATTAGE[W] 59.4 80 80.4 81 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 18 16 6.7 5.4 SPECIFICATIONS MODEL MGFS80243R3 MGFS802405 MGFS802412 MGFS802415 INPUT VOLTAGE[V] DC9 - 36 (Surge Voltage 50V, 100ms max) CURRENT[A] *2 2.69typ 3.60typ 3.56typ 3.59typ EFFICIENCY[%] *2 92typ 93typ 94typ 94typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 18 16 6.7 5.4 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 20max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max Io=0 to 10% 200max 200max 240max 240max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max Io=0 to 10% 250max 250max 270max 270max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) MODEL MGFS80483R3 MGFS804805 MGFS804812 MGFS804815 MAX OUTPUT WATTAGE[W] 59.4 80 80.4 81 DC OUTPUT VOLTAGE[V] *1 3.3 5 12 15 CURRENT[A] 18 16 6.7 5.4 SPECIFICATIONS MODEL MGFS80483R3 MGFS804805 MGFS804812 MGFS804815 INPUT VOLTAGE[V] DC18 - 76 (Surge Voltage 100V, 100ms max) CURRENT[A] *2 1.35typ 1.80typ 1.78typ 1.80typ EFFICIENCY[%] *2 92typ 93typ 94typ 94typ OUTPUT VOLTAGE[V] 3.3 5 12 15 CURRENT[A] 18 16 6.7 5.4 LINE REGULATION[mV] 13.2max 20max 48max 60max LOAD REGULATION[mV] 20max 20max 48max 60max RIPPLE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 100max 100max 120max 120max Io=0 to 10% 200max 200max 240max 240max RIPPLE NOISE[mVp-p] -20 to +60C 75max 75max 100max 100max -40 to -20C 150max 150max 150max 150max Io=0 to 10% 250max 250max 270max 270max TEMPERATURE REGULATION[mV] -20 to +60C 50max 50max 150max 180max -40 to +60C 80max 80max 240max 290max DRIFT[mV] *4 20max 20max 48max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed (TRM pin open) ±10% adjustable by external VR PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) January 31, 2022

INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL62368-1, C-UL(CSA62368-1), EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm (WXHXD) / 50g max COOLING METHOD Convection/Forced air *1 MGFW80xx12/MGFW80xx15 is a vailable as single output +24V/+30V Rated input v oltage (DC24V, DC48V) Io=100% Riple and Ripple Noise is measured b y using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope) Dr ift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C P arallel operation with other model is not possible. (TOP VIEW) ¶Recommended Pad and Hole dia. ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 50g max 9.93.51±0.1f 6-f1.5 Name Plate +Vout TRM -Vout +Vin -Vin RC 10.1610.16 5.0810.165.08 25.4 45.72 50.8 Unit : 0.1inch Dimension : mm Case Bottom Cover [1.8] [2.0] [0.2] [0.4] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

DC-DC Converters PCB Mount Type MGF W 80 24 12 -O G : Capacitor between Input and Output is removed. R : with Remote ON/OFF ( Positive logic control) R 1 2 3 4 5 6 MODEL MGFW802412 MGFW802415 MGFW804812 MGFW804815 MAX OUTPUT WATTAGE[W] 81.6 81 81.6 81 DC OUTPUT VOLTAGE[V] *1 ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 CURRENT[A] 3.4 2.7 3.4 2.7 SPECIFICATIONS MODEL MGFW802412 MGFW802415 MGFW804812 MGFW804815 INPUT VOLTAGE[V] DC9 - 36 (Surge Voltage 50V, 100ms max) DC18 - 76 (Surge Voltage 100V, 100ms max) CURRENT[A] *2 3.62typ 3.59typ 1.81typ 1.80typ EFFICIENCY[%] *2 94typ 94typ 94typ 94typ OUTPUT VOLTAGE[V] ±12 or +24 ±15 or +30 ±12 or +24 ±15 or +30 CURRENT[A] 3.4 2.7 3.4 2.7 LINE REGULATION[mV] 60max 75max 60max 75max LOAD REGULATION[mV] *3 600max 750max 600max 750max *4 480max 600max 480max 600max RIPPLE[mVp-p] -20 to +60C 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max Io=0 to 10% 240max 240max 240max 240max RIPPLE NOISE[mVp-p] -20 to +60C 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max Io=0 to 10% 270max 270max 270max 270max TEMPERATURE REGULATION[mV] -20 to +60C 150max 180max 150max 180max -40 to +60C 240max 290max 240max 290max DRIFT[mV] *6 50max 60max 50max 60max START-UP TIME[ms] 30max (Minimum input, Rated load) PROTECTION CIRCUIT AND OTHERS OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION Work over 115 to 140% of rating (Total of +Vo and -Vo) REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (20±15C) ENVIRONMENT OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Refer to “Derating”), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL62368-1, C-UL (CSA62368-1), EN62368-1 OTHERS CASE SIZE/WEIGHT 25.4X9.9X50.8mm (WXHXD) / 50g max COOLING METHOD Convection/Forced air *1 Single output +24V/+30V with no use of COM Rated input v oltage(DC24V, DC48V) Io=100% Symmetr ical loading from 0% to 100% Symmetr ical loading from 20% to 100% Riple and Ripple Noise is measured b y using test board with ceramic capacitor 22μF and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope) Dr ift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C Rated input v oltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C P arallel operation with other model is not possible. January 31, 2022

(TOP VIEW) ¶Recommended Pad and Hole dia. ¶ Tolerance ±0.5 [±0.02] ¶ Dimensions in mm, [ ]=inches ¶ Pin terminal material : Copper ¶ Plating treatment of terminal : Lead free plating ¶ Case material : Brass ¶ Plating treatment of case : Nickel plating ¶ Bottom Cover : FR4 (t=0.6) [t=0.024] ¶ Please keep enough creepage distance with the pattern on PCB and other components. ¶ Weight 50g max 9.93.51±0.1f 6-f1.5 Name Plate +Vout COM -Vout +Vin -Vin RC 10.1610.16 5.0810.165.08 25.4 45.72 50.8 Unit : 0.1inch Dimension : mm Case Bottom Cover [1.8] [2.0] [0.2] [0.4] [0.2] [0.4] [0.4] [0.14] [0.39] [1.0] January 31, 2022

¿MG15/MG40 Single Output and Dual (±) Output ¿MG30/MG80 Single Output and Dual (±) Output TRM RC -Vout +Vout -Vin +Vin Input Load <Top view> (a) Single Output COM RC Load Load -Vout +Vout -Vin +Vin Input Load <Top view> (b) Dual (±) Output -Vout RC Load TRM +Vout -Vin +Vin Input <Top view> (a) Single Output COM RC Load Load -Vout +Vout -Vin +Vin Input Load <Top view> (b) Dual (±) Output Installation ¡When two or more power supplies are used side by side, position them with proper intervals to allow enough air ventilation. Ambient tem- perature around each power supply should not exceed the temperature range shown in “Derating”. Soldering Conditions (1) Flow Soldering : 260ª 15 seconds or less (2) Soldering Iron : maximum 360ª 5 seconds or less Stress to Pin ¡Applying excessive stress to the input or output pins of the power module may damage internal connections. Avoid applying stress in excess of that shown in right figure. ¡Input/output pin are soldered to the PCB internally. Do not pull or bend a lead powerfully. ¡If it is expected that stress is applied to the input/output pin due to vibration or impact, reduce the stress to the pin by taking such measures as fixing the unit to the PCB by silicone rubber, etc. ¡Due to prevent failure, PS should not be pulled after soldering with PCB. 19.6N (2kgf) or less 19.6N (2kgf) or less Pin No. Pin Name Function 1 +Vin +DC Input 2 -Vin -DC Input

3 RC Remote ON/OFF

5 TRM Output Voltage Adjustment (Refer to

instruction manual 1.5) COM GND of Output Voltage (for Dual Output) 6 -Vout -DC Output Pin No. Pin Name Function 1 +Vin +DC Input 2 -Vin -DC Input 5 -Vout -DC Output (for Single Output) COM GND of Output Voltage (for Dual Output)

6 TRM Output Voltage Adjustment (Refer to

instruction manual 1.5) -Vout -DC Output (for Dual Output) MG-77 Assembling and Installation Method Pin configuration MG15,MG30,MG40,MG80-series January 31, 2022

1300 4.5 Input Voltage [V] Load factor [%] 1812 100 3600 9 3624 7618 Input Voltage [V] Load factor [%] Derating curve for input voltage ¿MGFO4005O Ambient temperature derating curve ¡It is necessary to note thermal fatigue life by power cycle. Please reduce the temperature fluctuation range as much as possible when the up and down of temperature are frequently generated. ¡In case of forced air, ventilation must keep the temperature of point below the temperatures shown in Instruction Manual 7. ¿ MGFO4024O, MGFO4048O, MGFO8024O and MGFO8048O ¿MG15/MGF15 (Rated Input Voltage) ¿MG30/MGF30 (Rated Input Voltage) (1) In the case of Convection Cooling (1) In the case of Convection Cooling (2) In the case of Forced Air Cooling (1.0m/s) (Excluding MGW15O05/MGFW15O05) (2) In the case of Forced Air Cooling (1.0m/s) (Excluding MGW30O05 and MGFW30O12/15) -40- 20 02 04 06 (55) 08 0 1000 100 (85) Ambient temperature Ta [C] 1 2 Load factor [%] Natural Convection

1 MGW15O05 / MGFW15O05

-40- 20 02 04 06 08 0 1000 100 (85) Ambient temperatureT a[ C] Load factor [%] Forced air (1.0m/s) -40- 20 02 04 06 08 0 1000 100 (85) 1 2 Ambient temperature Ta [C] Load factor [%] Forced air 1 1.0m /s 2 2.5m /s (3) In the case of Forced Air Cooling (1.0m/s, 2.5m/s) (MGW15O05/MGFW15O05) -40- 20 02 04 06 (55) 08 0 1000 100 (85) Ambient temperature Ta [C] 1 3 Load factor [%] Natural Convection

1 MGFS302412

2 MGFS302415 / 4812 / 4815

-40- 20 02 04 06 08 0 1000 100 (85) Ambient temperatureT a[ C] Load factor [%] Forced air (1.0m/s) (3) In the case of Forced Air Cooling (1.0m/s, 1.5m/s) (MGW30O05 and MGFW30O12/15) -40- 20 02 04 06 08 0 1000 100 (85) 1 2 Ambient temperature Ta [C] Load factor [%] Forced air 1 1.0m /s 2 1.5m /s MG-78 Derating MG15,MG30,MG40,MG80-series January 31, 2022

¿MGF40 (Rated Input Voltage) ¿MGF80 (Rated Input Voltage) (1) In the case of Convection Cooling (1) In the case of Convection Cooling (2) In the case of Forced Air Cooling (1.0m/s) (2) In the case of Forced Air Cooling (1.0m/s) - 40 - 20 0 20 40 60 80 1000 100 Ambient temperature Ta [C] Load factor [%] A B C D E F Input Voltage[V] Output Voltage[V] 3.3 5 12 15 ±12 ±15

5 B A B C B B

24 E D E F E E

48 F D F E E E

40 - 20 0 20 40 6 (55) 0 80 1000 100 (85) Ambient temperature Ta [C] Load factor [%] (65) A B C D Input Voltage[V] Output Voltage[V] 3.3 5 12 15 ±12 ±15

24 B A C C C C

48 C B C D C C

-40- 20 02 04 06 08 0 1000 100 (85) Ambient temperatureT a[ C] Load factor [%] Forced air (1.0m/s) -40- 20 02 04 06 08 0 1000 100 (85) Ambient temperatureT a[ C] Load factor [%] Forced air (1.0m/s) MG-79 Derating ◆ It is neccessary to read the “Instruction Manual” and “Before using our product” before you use our product. Instruction Manual https://en.cosel.co.jp/product/powersupp ly/MGS/ Instruction Manual https://en.cosel.co.jp/product/powersupp ly/MGW/ Instruction Manual https://en.cosel.co.jp/product/powersupp ly/MGFS/ Instruction Manual https://en.cosel.co.jp/product/powersupp ly/MGFW/ Before using our product https://en.cosel.co.jp/technical/caution/in dex.html Instruction Manual NOTICE MGFW MGFS MGW MGS Basic Characteristics Data Model Circuit method Switching frequency [kHz] (reference) Input current [A] Inrush current protection PCB/Pattern Series/Parallel operation availability Material Single sided Double sided Series operation Parallel operation MG15 Flyback converter 445-495 *1 - glass fabric base,epoxy resin Ye s Ye s *2 MGF15 Flyback converter 445-495 *1 - glass fabric base,epoxy resin Ye s Ye s *2 MG30 Forward converter 380-460 *1 - glass fabric base,epoxy resin Ye s Ye s *2 MGF30 Forward converter 380-460 *1 - glass fabric base,epoxy resin Ye s Ye s *2 MGF40 Flyback converter 100-1500 *3 *1 - glass fabric base,epoxy resin Ye s Ye s *2 MGF80 Flyback converter 100-1500 *3 *1 - glass fabric base,epoxy resin Ye s Ye s *2 *1 Refer to Specification. Ref er to Instruction Manual. The v alue changes depending on input and load. MG15,MG30,MG40,MG80-series January 31, 2022

Product Information

MGF30 specifications and overview.

Summary

DC-DC Converters PCB Mount Type January 31, 2022

Description

DC-DC Converters PCB Mount Type January 31, 2022

Source title MGF30 Datasheet(PDF) - COSEL CO., LTD.

Related Parts

More parts from the same family.

Browse manufacturer