MGA-31716_16 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 19

Technical content

Features

 Very high linearity at low DC bias power [1]  High Gain with good gain fl atness  ROHS compliant  Good Noise Figure  Halogen free  Advanced enhancement-mode PHEMT Technology  QFN 3X3 16-Lead standard package  Lead-free MSL1 Specifi cations At 900 MHz, Vd = 5 V, Id = 68 mA (typ) @ 25° C  OI P3 = 39.5 dBm  Noise Figure = 1.9 dB  Gain = 20.6 dB  P1dB = 22.5 dBm  IRL = 15.5 dB, ORL = 15.5 dB Note: 1. The MGA-31716 has a superior LFOM of 16.5 dB. Linearity-Figure-of- Merit (LFOM) is the ratio of OIP3 to total DC bias power. Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 60 V ESD Human Body Model = 300 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. Figure 1. Simplifi ed Application Circuit

3 RFin

Table 1. MGA-31716 Absolute Maximum Rating [1] TA = 25° C

  1. Operation of this device in excess of any of
  2. Source lead temperature is 25° C. Derate 14.9
  3. Thermal resistance measured using 150° C

Infra-Red Microscopy Technique. Table 2. MGA-31716 Electrical Specifi cation [1] Symbol Parameter and Test Condition Frequency Units Min. Typ. Max.

900 MHz

1500 MHz

  1. Measurements obtained from test circuit and demoboard detailed in Figures 46 and 47 and Table 3.
  2. OIP3 test condition: F1 – F2 = 1 MHz, with input power of -12 dBm per tone measured at worst case side band.
  3. LFOM is defi ned as LFOM = OIP3 (in dBm) – P

DC (in dBm). It is a measure of the linearity of an amplifi er per unit of DC power consumed.

  1. Demoboard tuned to best OIP3 with minimum over-temperature drift.

Figure 18. P1dB and Quiescent Current with diff erent R1 [1] Figure 19. P1dB and Quiescent Current with diff erent R2 [1]

  1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig . 46).

Figure 31. P1dB and Quiescent current with diff erent R1 [1] Figure 32. P1dB and Quiescent current with diff erent R2 [1]

  1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig . 46).

Figure 44. P1dB and Quiescent current with diff erent R1 [1] Figure 45. P1dB and Quiescent current with diff erent R2 [1]

  1. Vbias and Vctrl can be externally controlled by change external biasing resistors R1 = Rbias and R2 = Rctrl (as shown in Fig . 46).

Table 4. MGA-31716 Typical Scattering Parameters

Figure 49. K-Factor vs Frequency Table 5. MGA-31716 Typical Noise Parameters

PCB Layout and Stencil Design Notes: 1. All dimensions are in milimeters 2. 4mil stencil thickness recommended PCB LAND PATTERN (TOP VIEW) STENCIL OUTLINE COMBINED PCB & STENCIL LAYOUTS Chamfer 0.24 1.550.23 0.32 0.50 1.55 0.50 ø 0.26 0.56 Chamfer 0.06 1.24 1.24 0.49 0.35 0.21 Chamfer 0.192 0.50 0.32 1.55 1.24 1.24 1.55 0.23 0.21 0.36 0.50 3.20 2.92 0.50 3.20

Part Number Ordering Information Part Number No. of Devices Container MGA-31716-BLKG 100 Antistatic Bag MGA-31716-TR1G 3000 13” Tape/Reel Notes: 1. All dimensions are in milimeters. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold fl ash and metal burr. TOP VIEW SIDE VIEW BOTTOM VIEW 31716 YYWW XXXX 3.00 ±0.10 3.00 ±0.10 Pin 1 dot By marking 0.20 Ref. 0.00 +0.05 0.40 ±0.05 1.55 ±0.05 Exp.DAP 1.55 ±0.05 Exp.DAP

0.50 Bsc

0.23 ±0.05 1.50 Ref. Pin #1 identification Chamfer 0.30 x 45° 0.85 ±0.05

Notes: 1. Measured from centerline of sprocket hole to centerline of pocket 2. Cumulative tolerance of 10 sprocket holes is ±0.20 3. Other material available 4. All dimensions in millimeter unless otherwise stated CL 0.3 ±0.05 3.3 ±0.1 1.55 ±0.1 1.6±0.1 R 0.3 Typical 1.55 ±0.05 2.0 ±0.1[1] 4.0 ±0.1[2] 1.75 ±0.1 5.5 ±0.1[1] 12.0 ±0.3 3.3±0.18.0 ±0.1

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago Technologies and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2014-2016 Avago Technologies. All rights reserved. AV02-3264EN - April 29, 2016 Reel Dimension – 13” Reel 12 mm Width PS 211211 8 7 20 3 PS PS CPN 12MM MPN Detail "X" RECYCLE LOGO SEE DETAIL "X" R19.0±0.5 Ø12.3±0.5(3x) Ø100.0±0.5 Ø329.0±1.0 11.9-15.4** 18.4 MAX.* SLOT 5.0±0.5 (3x) 12.4 +2.0* -0.0 EMBOSSED LETTERING 16.0 mm HEIGHT x MIN. 0.4 mm THICK. EMBOSSED LINE (2x) 89.0 mm LENGTH LINES 147.0 mm AWAY FROM CENTER POINT EMBOSSED LETTERING 7.5 mm HEIGHT DATE CODE ESD LOGO Ø16.0 EMBOSSED LETTERING 7.5 mm HEIGHT HUB Ø100.0±0.5 Ø329.0±1.0 20.2 (MIN.) 1.5 (MIN.) Ø13.0 +0.5 -0.2 BACK VIEW FRONT VIEW 8 7 6 5