MGA-31489 AVAGO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features

  • ROHS compliant
  • Halogen free
  • High IP3 at low DC bias power[1]
  • High gain, with good gain flatness
  • Low noise figure
  • Advanced enhancement mode PHEMT Technology
  • Excellent uniformity in product specification
  • SOT-89 standard package Specifications At 1.9 GHz, Vd = 5 V, Id = 69 mA (typ) @ 25° C
  • OIP3 = 37.3 dBm
  • Noise Figure = 1.9 dB
  • Gain = 19.5 dB, Gain Flatness (± 50 MHz) = 0.11 dB
  • P1dB = 21.9 dBm
  • IRL = 17.2 dB, ORL = 10.1 dB Note: 1. The MGA-31489 has a superior LFOM of 11.9 dB. Linearity Figure of Merit (LFOM) is essentially OIP3 divided by DC bias power. Simplified Schematic Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 120 V ESD Human Body Model = 1400 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control.

Figure 1. Simplified Schematic diagram

Symbol Parameter Units Absolute Max. Vd, max Drain Voltage, RF output to ground V 5.5 Pd Power Dissipation (2) mW 605 Pin CW RF Input Power dBm 20 Tj Junction Temperature °C 150 TSTG Storage Temperature °C -65 to 150 Thermal Resistance Thermal Resistance [3] (Vd = 5.0 V, Tc = 85° C), θjc = 51.7° C/W Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Source lead temperature is 25° C. Derate 19.3 mW/° C for TL>131.4° C. 3. Thermal resistance measured using 150° C Infra-Red Microscopy Technique. TC = 25° C, Vd = 5 V, unless noted Symbol Parameter and Test Condition Frequency Units Min. Typ. Max. Ids Quiescent Current N/A mA 57 69 84 NF Noise Figure 1.9 GHz

2.5 GHz

dB – 1.9 2.0 2.35 Gain Gain 1.9 GHz dB 18.2 19.5 20.5 21.2 OIP3 (2) Output Third Order Intercept Point 1.9 GHz (2)

2.5 GHz (2)

dBm 34.8 37.3 37.2 P1dB Output Power at 1 dB Gain Compression 1.9 GHz dBm 20.1 21.9 22.2 PAE Power Added Efficiency at P1dB 1.9 GHz % – 39.1 40.2 IRL Input Return Loss 1.9 GHz dB – 17.2 15.9 ORL Output Return Loss 1.9 GHz dB – 10.1 18.5 ISOL Isolation 1.9 GHz dB – 27.0 29.3 Note : 1. Measurements obtained from a test circuit described in Figure 25. 2. OIP3 test condition: F1 - F2 = 10 MHz, with input power of -12 dBm per tone measured at worst case side band.

MGA-31489 Typical Scatter Parameters (1) Tc = 25° C, Vd = 5.0 V, Id = 69 mA, Zo = 50 Ω Freq GHz S11 S11 S11 S21 S21 S21 S12 S12 S12 S22 S22 S22

MGA-31489 K-Factor (1) Tc = 25° C, Vd = 5.0 V, Id = 69 mA, Zo = 50 Ω MGA-31489 Typical Noise Parameters (1) Tc = 25° C, Vd = 5.0 V, Id = 69 mA, Zo = 50 Ω Freq (GHz) Fmin (dB) Γopt Mag Γopt Ang Rn/Z0 Ga (dB) Note: 1. Measurements are made using 10 mils Rogers RO4350 TRL Board. 0 2 4 6 8 10 12 14 16 18 20 Frequency (GHz) K Factor K Factor

Part Number Ordering Information Part Number No. of Devices Container MGA-31489-BLKG 100 Anti-static Bag MGA-31489-TR1G 3000 13" Tape/Reel Dimensions in mm Dimensions in inches Symbols Minimum Nominal Maximum Minimum Nominal Maximum E 3.94 - 4.25 0.155 - 0.167 MATTE FINISH POLISH POLISH D E L b e e1S C b1 b A OR 1.24 1.23 0.77

0.2 HALF ETCHING

1.625 2.35 DEPTH 0.100 E D E L e e1S OR

NOTES: 1. 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE ±0.2 2. CAMBER IN COMPLIANCE WITH EIA 481 3. POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE 12.0 ± .3 Ao = 4.60 Bo = 4.90 Ko = 1.90 5.50 ± .05 SEE NOTE 3 1.75 ± .10 8.00 Ø 1.5 +0.1/-0.0 2.00 ± .05 SEE NOTE 3

4.00 SEE NOTE 1

Ø 1.50 MIN. Ao Ko R 0.3 TYP . R 0.3 MAX. 0.30 ± .05 A A Bo USER FEED DIRECTION COVER TAPE CARRIER TAPE REEL 14X 14X 14X 14X

For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. AV02-2587EN - June 18, 2013 Reel Dimension – 13” Reel Ø 20.2 M IN 2.0 ± 0.5 Ø 13.0 +0.5 -0.2 102.0 REF 330.0 REF 8.4(MEASURED AT HUB) (MEASURED AT HUB) "A" ATTENTION Electrostatic Sensitive Devices Safe Handling Required MINNEAPOLIS USA U.S PAT 4726534 R LOKREEL R 11.1 MAX. Detail "A" Detail "B" PS PS 1.5

88 REF

96.5 +0.3 - 0.2 Dimensions in mm